ZXRE1004DR
Product Overview
- Category: Integrated Circuit (IC)
- Use: Voltage Reference
- Characteristics: High precision, low power consumption
- Package: SOIC-8
- Essence: Provides a stable voltage reference for various electronic applications
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Voltage Output: 1.25V
- Initial Accuracy: ±0.5%
- Temperature Coefficient: ±50ppm/°C
- Operating Temperature Range: -40°C to +125°C
- Supply Voltage Range: 2.7V to 36V
- Quiescent Current: 60µA
Detailed Pin Configuration
The ZXRE1004DR has the following pin configuration:
- VOUT: Voltage Output
- GND: Ground
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- VIN: Supply Voltage Input
- NC: No Connection
Functional Features
- Provides a stable and accurate voltage reference
- Low quiescent current makes it suitable for battery-powered devices
- Wide operating temperature range allows for use in various environments
- Excellent initial accuracy and temperature coefficient ensure precise voltage regulation
Advantages
- High precision voltage reference
- Low power consumption
- Compact SOIC-8 package
- Wide supply voltage range
Disadvantages
- Limited pin configuration options
- Not suitable for high current applications
Working Principles
The ZXRE1004DR is based on bandgap voltage reference technology. It utilizes a combination of bipolar and CMOS transistors to generate a stable voltage output. The internal circuitry compensates for temperature variations, ensuring consistent performance across a wide temperature range.
Detailed Application Field Plans
The ZXRE1004DR is commonly used in the following applications:
- Precision analog-to-digital converters (ADCs)
- Voltage regulators
- Battery-powered devices
- Sensor circuits
- Data acquisition systems
Alternative Models
- LM4040
- LT1236
- MAX619
These alternative models offer similar voltage reference capabilities and can be considered as substitutes for the ZXRE1004DR.
Word count: 250 words
기술 솔루션에 ZXRE1004DR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of ZXRE1004DR in technical solutions:
Q: What is ZXRE1004DR? A: ZXRE1004DR is a low-power, low-voltage shunt voltage reference IC used in various electronic applications.
Q: What is the operating voltage range of ZXRE1004DR? A: The operating voltage range of ZXRE1004DR is typically between 1.24V and 5.5V.
Q: What is the purpose of using ZXRE1004DR in a circuit? A: ZXRE1004DR is commonly used as a stable voltage reference for precise voltage regulation or as a voltage biasing component.
Q: Can ZXRE1004DR be used in battery-powered devices? A: Yes, ZXRE1004DR is suitable for battery-powered devices due to its low-power consumption and wide operating voltage range.
Q: How accurate is the voltage reference provided by ZXRE1004DR? A: ZXRE1004DR has a typical initial accuracy of ±0.5% and a temperature coefficient of ±50 ppm/°C, ensuring reliable voltage references.
Q: Can ZXRE1004DR handle high current loads? A: No, ZXRE1004DR is not designed to handle high current loads. It is primarily used for low-power applications.
Q: Is ZXRE1004DR compatible with both analog and digital circuits? A: Yes, ZXRE1004DR can be used in both analog and digital circuits as a stable voltage reference.
Q: Does ZXRE1004DR require any external components for operation? A: Yes, ZXRE1004DR requires an external resistor to set the desired output voltage.
Q: Can ZXRE1004DR operate in extreme temperature conditions? A: Yes, ZXRE1004DR has a wide operating temperature range of -40°C to +125°C, making it suitable for various environments.
Q: Are there any specific precautions to consider when using ZXRE1004DR? A: It is important to ensure proper heat dissipation and avoid exceeding the maximum recommended input voltage to prevent damage to the IC.