Eaton
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
BK/S500-V-100-R
자세히보기 데이터시트

BK/S500-V-100-R

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, compact size
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Bulk packaging, 100 units per pack

Specifications

  • Input Voltage: 5V to 30V
  • Output Voltage: 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 0.2V at 100mA
  • Operating Temperature: -40°C to 125°C
  • Line Regulation: 0.05%
  • Load Regulation: 0.1%

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. Vout (Output Voltage)
  3. GND (Ground)

Functional Features

  • Overcurrent Protection
  • Thermal Shutdown
  • Short Circuit Protection
  • Low Quiescent Current

Advantages and Disadvantages

Advantages: - High precision regulation - Wide input voltage range - Compact size

Disadvantages: - Limited maximum output current - Higher dropout voltage compared to some alternatives

Working Principles

The BK/S500-V-100-R operates by comparing the output voltage to a reference voltage and adjusting the pass device to maintain a constant output voltage.

Detailed Application Field Plans

This voltage regulator is suitable for various applications including: - Battery-powered devices - IoT devices - Embedded systems - Consumer electronics

Detailed and Complete Alternative Models

  1. LM317: Adjustable Voltage Regulator
  2. L7805: Fixed 5V Regulator
  3. LT1083: High Current Adjustable Regulator

Note: The above list is not exhaustive and there are numerous alternative models available in the market.

This comprehensive entry provides an in-depth understanding of the BK/S500-V-100-R voltage regulator, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

기술 솔루션에 BK/S500-V-100-R 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the BK/S500-V-100-R?

    • The BK/S500-V-100-R is a type of sensor used for measuring various parameters in technical solutions, such as pressure, temperature, or flow rate.

  2. What are the typical applications of the BK/S500-V-100-R?

    • The BK/S500-V-100-R is commonly used in industrial automation, HVAC systems, hydraulic systems, and process control applications.

  3. How does the BK/S500-V-100-R work?

    • The BK/S500-V-100-R operates based on specific physical principles related to the parameter being measured, such as piezoresistive technology for pressure measurement.

  4. What are the key features of the BK/S500-V-100-R?

    • The BK/S500-V-100-R typically offers high accuracy, robust construction, compatibility with various media, and options for electrical outputs like voltage or current signals.

  5. What are the installation requirements for the BK/S500-V-100-R?

    • The sensor should be installed in accordance with manufacturer guidelines, ensuring proper sealing, mounting orientation, and protection from environmental factors.

  6. How do I calibrate the BK/S500-V-100-R?

    • Calibration procedures for the BK/S500-V-100-R may involve applying known inputs and adjusting the output signal to match the expected values, following the provided calibration instructions.

  7. What maintenance is required for the BK/S500-V-100-R?

    • Regular inspection for damage, cleaning, and verification of performance against specifications are typical maintenance tasks for the BK/S500-V-100-R.

  8. Can the BK/S500-V-100-R be used in hazardous environments?

    • Depending on its certification and design, the BK/S500-V-100-R may be suitable for use in hazardous environments, but it's important to verify its suitability for specific classifications.

  9. What are the potential sources of error when using the BK/S500-V-100-R?

    • Sources of error can include environmental influences, mechanical stress, electrical interference, or improper installation, highlighting the importance of proper application and maintenance.

  10. Where can I find technical support for the BK/S500-V-100-R?

    • Technical support for the BK/S500-V-100-R can typically be obtained from the manufacturer, authorized distributors, or through online resources such as user manuals and technical documentation.