71V3579S85PFGI
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Memory Controller
- Characteristics: High-performance, low-power consumption
- Package: Surface Mount Technology (SMT)
- Essence: Efficient memory management and control
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Memory Type: Synchronous Dynamic Random Access Memory (SDRAM)
- Memory Size: 4 Megabytes (MB)
- Data Bus Width: 32 bits
- Clock Frequency: 85 Megahertz (MHz)
- Supply Voltage: 3.3 Volts (V)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The 71V3579S85PFGI IC has a total of 100 pins. The pin configuration is as follows:
- VDDQ
- DQ0
- DQ1
- DQ2
- DQ3
- DQ4
- DQ5
- DQ6
- DQ7
- DQ8
- DQ9
- DQ10
- DQ11
- DQ12
- DQ13
- DQ14
- DQ15
- DQ16
- DQ17
- DQ18
- DQ19
- DQ20
- DQ21
- DQ22
- DQ23
- DQ24
- DQ25
- DQ26
- DQ27
- DQ28
- DQ29
- DQ30
- DQ31
- VSSQ
- A0
- A1
- A2
- A3
- A4
- A5
- A6
- A7
- A8
- A9
- A10
- A11
- A12
- A13
- A14
- A15
- A16
- A17
- A18
- A19
- A20
- A21
- A22
- A23
- A24
- A25
- A26
- A27
- A28
- A29
- A30
- A31
- /CAS
- /RAS
- /WE
- /CS0
- /CS1
- /CS2
- /CS3
- /CS4
- /CS5
- /CS6
- /CS7
- /CKE
- /CLK
- /CKE2
- /CLK2
- /ODT
- /RESET
- VDD
- VSS
- VREF
- VTT
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
- NC
Functional Features
- Efficient memory management and control
- Synchronous operation with the system clock
- Burst mode for faster data transfer
- Auto precharge and power-down modes for power saving
- On-die termination (ODT) for improved signal integrity
- Multiple chip select options for flexible memory expansion
Advantages and Disadvantages
Advantages: - High-performance memory controller - Low-power consumption - SMT package for easy integration into circuit boards - Wide operating temperature range for various environments
Disadvantages: - Limited memory size (4MB) - Requires external clock synchronization
Working Principles
The 71V3579S85PFGI is a memory controller IC designed to efficiently manage and control synchronous dynamic random access memory (SDRAM). It operates synchronously with the system clock, allowing for faster data transfer. The IC supports burst mode, which enables consecutive memory accesses without the need for individual address commands. It also features auto precharge and power-down modes to conserve power when the memory is not in use. On-die termination (ODT) helps improve signal integrity by matching impedance on the memory bus. The IC offers multiple chip select options, allowing for flexible memory expansion.
Detailed Application Field Plans
The 71V3579S85PFGI is commonly used in various electronic devices that require efficient memory management and control. Some
기술 솔루션에 71V3579S85PFGI 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of 71V3579S85PFGI in technical solutions:
Q: What is the 71V3579S85PFGI? A: The 71V3579S85PFGI is a specific model of integrated circuit (IC) used in technical solutions.
Q: What are the key features of the 71V3579S85PFGI? A: Some key features of this IC include high-speed operation, low power consumption, large storage capacity, and compatibility with various interfaces.
Q: In what technical solutions can the 71V3579S85PFGI be used? A: This IC can be used in a wide range of applications such as data storage systems, networking equipment, telecommunications devices, and industrial control systems.
Q: What is the maximum storage capacity of the 71V3579S85PFGI? A: The maximum storage capacity of this IC is typically 4 megabits (Mb).
Q: What interfaces does the 71V3579S85PFGI support? A: This IC supports various interfaces including parallel, serial, and synchronous interfaces.
Q: What is the operating voltage range for the 71V3579S85PFGI? A: The operating voltage range for this IC is typically between 2.7V and 3.6V.
Q: Can the 71V3579S85PFGI be used in low-power applications? A: Yes, this IC is designed to operate with low power consumption, making it suitable for low-power applications.
Q: Does the 71V3579S85PFGI have built-in error correction capabilities? A: Yes, this IC typically includes built-in error correction circuitry to ensure data integrity.
Q: Is the 71V3579S85PFGI compatible with industry-standard protocols? A: Yes, this IC is designed to be compatible with various industry-standard protocols, making it easy to integrate into existing systems.
Q: Are there any specific design considerations when using the 71V3579S85PFGI? A: It is important to consider factors such as signal integrity, power supply stability, and proper grounding when designing with this IC to ensure optimal performance.
Please note that the answers provided here are general and may vary depending on the specific application and requirements.