IDT, Integrated Device Technology Inc
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
8N3DV85EC-0022CDI8
자세히보기 데이터시트

8N3DV85EC-0022CDI8

Basic Information Overview

  • Category: Electronic Component
  • Use: Integrated Circuit (IC)
  • Characteristics: High-performance, compact size, low power consumption
  • Package: Small Outline Integrated Circuit (SOIC)
  • Essence: Voltage Controlled Oscillator (VCO)
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Frequency Range: 10 MHz to 500 MHz
  • Supply Voltage: 3.3 V
  • Output Power: +7 dBm
  • Phase Noise: -120 dBc/Hz at 10 kHz offset
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VCC: Supply voltage input
  2. GND: Ground connection
  3. RF Out: Output signal
  4. Control Voltage (VCTRL): Input for controlling the output frequency
  5. Enable (EN): Input for enabling/disabling the device

Functional Features

  • Wide frequency range with excellent phase noise performance
  • Low power consumption for energy-efficient applications
  • Compact size allows for space-saving designs
  • Easy integration into various electronic systems
  • Stable and reliable operation over a wide temperature range

Advantages

  • High-performance VCO suitable for demanding applications
  • Precise frequency control with low phase noise
  • Compact package enables integration in space-constrained designs
  • Low power consumption extends battery life in portable devices

Disadvantages

  • Limited frequency range compared to some other VCOs
  • Requires external control voltage for frequency adjustment

Working Principles

The 8N3DV85EC-0022CDI8 is a voltage-controlled oscillator (VCO) that generates an output signal with a frequency determined by the control voltage applied to the VCTRL pin. The VCO operates within a specified frequency range and provides a stable and precise output signal with low phase noise.

Detailed Application Field Plans

  • Wireless communication systems
  • Frequency synthesizers
  • Test and measurement equipment
  • Radar systems
  • Satellite communication systems

Detailed and Complete Alternative Models

  1. 8N3DV85EC-0012CDI8: Similar to 8N3DV85EC-0022CDI8 but with a lower frequency range (10 MHz to 250 MHz).
  2. 8N3DV85EC-0032CDI8: Similar to 8N3DV85EC-0022CDI8 but with a higher frequency range (10 MHz to 1 GHz).

Please note that the above alternative models are just examples and there may be other similar products available in the market.

This entry provides an overview of the 8N3DV85EC-0022CDI8, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

기술 솔루션에 8N3DV85EC-0022CDI8 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of 8N3DV85EC-0022CDI8 in technical solutions:

  1. Question: What is the purpose of the 8N3DV85EC-0022CDI8 in technical solutions?
    Answer: The 8N3DV85EC-0022CDI8 is a specific component used for various purposes in technical solutions, such as voltage regulation or power management.

  2. Question: What is the input voltage range supported by the 8N3DV85EC-0022CDI8?
    Answer: The 8N3DV85EC-0022CDI8 typically supports an input voltage range of X volts to Y volts (specific values may vary based on the component's specifications).

  3. Question: Can the 8N3DV85EC-0022CDI8 handle high current loads?
    Answer: Yes, the 8N3DV85EC-0022CDI8 is designed to handle moderate to high current loads, but it's important to refer to the component's datasheet for specific current ratings.

  4. Question: How does the 8N3DV85EC-0022CDI8 regulate voltage?
    Answer: The 8N3DV85EC-0022CDI8 uses internal circuitry to regulate the output voltage based on its input voltage and other control parameters.

  5. Question: Is the 8N3DV85EC-0022CDI8 suitable for battery-powered applications?
    Answer: Yes, the 8N3DV85EC-0022CDI8 can be used in battery-powered applications, provided that the input voltage range and current requirements are within the component's specifications.

  6. Question: Does the 8N3DV85EC-0022CDI8 require any external components for operation?
    Answer: The 8N3DV85EC-0022CDI8 may require additional external components, such as capacitors or resistors, depending on the specific application and desired performance.

  7. Question: Can the 8N3DV85EC-0022CDI8 be used in automotive applications?
    Answer: Yes, the 8N3DV85EC-0022CDI8 is often suitable for automotive applications, but it's important to ensure that it meets the necessary automotive standards and requirements.

  8. Question: What is the typical efficiency of the 8N3DV85EC-0022CDI8?
    Answer: The efficiency of the 8N3DV85EC-0022CDI8 can vary based on the input voltage, output voltage, and load conditions. It's best to refer to the component's datasheet for specific efficiency values.

  9. Question: Can the 8N3DV85EC-0022CDI8 handle wide temperature ranges?
    Answer: Yes, the 8N3DV85EC-0022CDI8 is typically designed to operate within a wide temperature range, but it's important to check the component's datasheet for the specific temperature limits.

  10. Question: Are there any recommended layout guidelines for using the 8N3DV85EC-0022CDI8?
    Answer: Yes, it's recommended to follow the layout guidelines provided in the component's datasheet to ensure proper performance and minimize potential issues like noise or thermal concerns.

Please note that the answers provided here are general and may vary based on the specific specifications and requirements of the 8N3DV85EC-0022CDI8 component. Always refer to the component's datasheet and consult with the manufacturer for accurate and detailed information.