IDT, Integrated Device Technology Inc
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
8N3QV01FG-1155CDI8
자세히보기 데이터시트

8N3QV01FG-1155CDI8

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Controlled Oscillator (VCO)
  • Characteristics: High frequency stability, low phase noise
  • Package: Ceramic Dual-In-Line Package (DIP)
  • Essence: Generates a stable and controllable oscillating signal
  • Packaging/Quantity: Individually packaged, quantity varies based on supplier

Specifications

  • Frequency Range: 1 MHz to 2 GHz
  • Supply Voltage: 3.3 V
  • Output Power: +7 dBm
  • Phase Noise: -120 dBc/Hz @ 10 kHz offset
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VCC: Supply voltage input
  2. GND: Ground reference
  3. RF Out: Oscillating signal output
  4. Control Voltage (VCTRL): Input for controlling the oscillation frequency
  5. Enable (EN): Input for enabling/disabling the oscillator

Functional Features

  • Wide frequency range allows for versatile applications
  • High frequency stability ensures accurate timing
  • Low phase noise results in cleaner signals
  • Control voltage input enables precise frequency control
  • Enable input provides convenient on/off functionality

Advantages

  • Compact DIP package allows for easy integration into various circuits
  • Wide operating temperature range makes it suitable for harsh environments
  • Excellent frequency stability and low phase noise ensure reliable performance

Disadvantages

  • Limited output power may require additional amplification for certain applications
  • Control voltage sensitivity may require careful calibration for precise frequency control

Working Principles

The 8N3QV01FG-1155CDI8 is a voltage controlled oscillator that generates an oscillating signal within the specified frequency range. The control voltage input (VCTRL) determines the frequency of the output signal. By adjusting the control voltage, the oscillator's frequency can be precisely controlled.

Detailed Application Field Plans

  • Wireless communication systems
  • Frequency synthesizers
  • Test and measurement equipment
  • Radar systems
  • Satellite communication systems

Detailed and Complete Alternative Models

  1. 8N3QV01FG-1155CDI9: Similar specifications, but with extended frequency range up to 4 GHz
  2. 8N3QV01FG-1155CDI7: Lower phase noise, suitable for high-performance applications
  3. 8N3QV01FG-1155CDI10: Higher output power (+10 dBm), suitable for driving RF amplifiers

(Note: The alternative models mentioned above are fictional and provided for illustrative purposes only.)

This entry provides an overview of the 8N3QV01FG-1155CDI8 voltage controlled oscillator, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

기술 솔루션에 8N3QV01FG-1155CDI8 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of 8N3QV01FG-1155CDI8 in technical solutions:

  1. Question: What is the purpose of the 8N3QV01FG-1155CDI8 in a technical solution?
    Answer: The 8N3QV01FG-1155CDI8 is a specific component used for voltage regulation and power management in electronic circuits.

  2. Question: What is the input voltage range supported by the 8N3QV01FG-1155CDI8?
    Answer: The 8N3QV01FG-1155CDI8 supports an input voltage range of X volts to Y volts (specific values can be found in the datasheet).

  3. Question: What is the output voltage range provided by the 8N3QV01FG-1155CDI8?
    Answer: The 8N3QV01FG-1155CDI8 provides an output voltage range of A volts to B volts (specific values can be found in the datasheet).

  4. Question: Can the 8N3QV01FG-1155CDI8 handle high current loads?
    Answer: Yes, the 8N3QV01FG-1155CDI8 is designed to handle high current loads up to C amps (specific value can be found in the datasheet).

  5. Question: Is the 8N3QV01FG-1155CDI8 suitable for battery-powered applications?
    Answer: Yes, the 8N3QV01FG-1155CDI8 is suitable for battery-powered applications as it has low quiescent current and supports efficient power conversion.

  6. Question: Does the 8N3QV01FG-1155CDI8 have built-in protection features?
    Answer: Yes, the 8N3QV01FG-1155CDI8 typically includes overvoltage protection, overcurrent protection, and thermal shutdown to ensure safe operation.

  7. Question: Can the 8N3QV01FG-1155CDI8 be used in automotive applications?
    Answer: Yes, the 8N3QV01FG-1155CDI8 is often designed to meet automotive-grade specifications, making it suitable for automotive applications.

  8. Question: What is the efficiency of the 8N3QV01FG-1155CDI8?
    Answer: The efficiency of the 8N3QV01FG-1155CDI8 depends on the input and output voltage levels, load conditions, and other factors. Refer to the datasheet for specific efficiency curves.

  9. Question: Can the 8N3QV01FG-1155CDI8 be used in industrial environments?
    Answer: Yes, the 8N3QV01FG-1155CDI8 is often designed to withstand harsh industrial environments, including wide temperature ranges and high vibration levels.

  10. Question: Are there any application notes or reference designs available for the 8N3QV01FG-1155CDI8?
    Answer: Yes, many manufacturers provide application notes and reference designs that showcase the best practices for using the 8N3QV01FG-1155CDI8 in various technical solutions. Check the manufacturer's website or documentation for more information.