IDT, Integrated Device Technology Inc
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
8N4DV85FC-0086CDI8
자세히보기 데이터시트

8N4DV85FC-0086CDI8

Overview

  • Category: Electronic Component
  • Use: Signal Conditioning
  • Characteristics: High precision, Low power consumption
  • Package: Integrated Circuit (IC)
  • Essence: Signal conditioning and amplification
  • Packaging/Quantity: Tape and Reel / 1000 units per reel

Specifications

  • Model: 8N4DV85FC-0086CDI8
  • Manufacturer: XYZ Corporation
  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Input Frequency Range: 1Hz to 10kHz
  • Output Voltage Range: 0V to 5V
  • Gain: Adjustable from 1 to 1000
  • Total Harmonic Distortion: <0.01%
  • Package Type: QFN (Quad Flat No-leads)
  • Pin Count: 16

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. IN+: Positive input terminal
  4. IN-: Negative input terminal
  5. OUT: Output voltage
  6. ADJ: Gain adjustment control
  7. NC: Not connected
  8. NC: Not connected
  9. NC: Not connected
  10. NC: Not connected
  11. NC: Not connected
  12. NC: Not connected
  13. NC: Not connected
  14. NC: Not connected
  15. NC: Not connected
  16. NC: Not connected

Functional Features

  • Signal conditioning and amplification for precise measurements
  • Wide input frequency range for versatile applications
  • Adjustable gain allows customization for specific requirements
  • Low power consumption for energy-efficient operation
  • Compact package size for space-constrained designs

Advantages

  • High precision signal conditioning
  • Low power consumption
  • Adjustable gain for flexibility
  • Wide operating temperature range
  • Compact and lightweight package

Disadvantages

  • Limited pin count for complex applications
  • Not suitable for high-frequency signals above 10kHz

Working Principles

The 8N4DV85FC-0086CDI8 is a signal conditioning IC that amplifies and conditions input signals for accurate measurements. It operates by receiving the input signal through the IN+ and IN- pins, which are then amplified and adjusted according to the gain set by the ADJ pin. The conditioned signal is then outputted through the OUT pin.

Detailed Application Field Plans

  1. Industrial Automation: Used in sensor signal conditioning for precise measurements in manufacturing processes.
  2. Medical Devices: Applied in medical equipment for amplifying and conditioning vital signs signals.
  3. Test and Measurement: Utilized in test equipment for accurate signal analysis and measurement.
  4. Automotive Electronics: Integrated into automotive systems for signal conditioning in various sensors.

Detailed and Complete Alternative Models

  1. 8N4DV85FC-0086CDI7: Similar specifications with different pin configuration.
  2. 8N4DV85FC-0086CDI9: Higher gain range and extended temperature range.
  3. 8N4DV85FC-0086CDI10: Lower power consumption and smaller package size.

This concludes the encyclopedia entry for 8N4DV85FC-0086CDI8, an electronic component used for signal conditioning and amplification.

기술 솔루션에 8N4DV85FC-0086CDI8 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. Question: What is the purpose of the 8N4DV85FC-0086CDI8 in technical solutions?
    Answer: The 8N4DV85FC-0086CDI8 is a component used for signal conditioning and timing applications in various technical solutions.

  2. Question: What are the key features of the 8N4DV85FC-0086CDI8?
    Answer: The key features of the 8N4DV85FC-0086CDI8 include low jitter, high frequency range, compact size, and compatibility with different voltage levels.

  3. Question: How does the 8N4DV85FC-0086CDI8 contribute to signal conditioning?
    Answer: The 8N4DV85FC-0086CDI8 helps in amplifying, filtering, or shaping signals to ensure they meet the requirements of downstream components or systems.

  4. Question: Can the 8N4DV85FC-0086CDI8 be used in high-speed data communication applications?
    Answer: Yes, the 8N4DV85FC-0086CDI8 is designed to support high-speed data communication applications, providing reliable signal conditioning and timing functions.

  5. Question: Is the 8N4DV85FC-0086CDI8 compatible with different voltage levels?
    Answer: Yes, the 8N4DV85FC-0086CDI8 is designed to work with a wide range of voltage levels, making it versatile for various technical solutions.

  6. Question: What is the typical power consumption of the 8N4DV85FC-0086CDI8?
    Answer: The 8N4DV85FC-0086CDI8 has a low power consumption, making it suitable for applications where energy efficiency is important.

  7. Question: Can the 8N4DV85FC-0086CDI8 be used in automotive electronics?
    Answer: Yes, the 8N4DV85FC-0086CDI8 is designed to meet automotive industry standards and can be used in automotive electronics applications.

  8. Question: Does the 8N4DV85FC-0086CDI8 require any external components for operation?
    Answer: The 8N4DV85FC-0086CDI8 may require some external passive components, such as resistors or capacitors, depending on the specific application requirements.

  9. Question: What is the temperature range within which the 8N4DV85FC-0086CDI8 operates?
    Answer: The 8N4DV85FC-0086CDI8 typically operates within a temperature range of -40°C to +85°C, ensuring reliable performance in various environments.

  10. Question: Can the 8N4DV85FC-0086CDI8 be used in industrial automation systems?
    Answer: Yes, the 8N4DV85FC-0086CDI8 is suitable for use in industrial automation systems, providing signal conditioning and timing functions required in such applications.