8T49N006A-999NLGI

Basic Information Overview

• Category: Electronic Component
• Use: Timing Device
• Characteristics: High Precision, Low Jitter
• Package: Surface Mount
• Essence: Crystal Oscillator
• Packaging/Quantity: Tape and Reel, 1000 pieces per reel

Specifications and Parameters

• Frequency Range: 1 MHz to 220 MHz
• Supply Voltage: 1.8 V to 3.3 V
• Output Type: LVCMOS, LVPECL, LVDS
• Operating Temperature Range: -40°C to +85°C

Detailed and Complete Pin Configuration

The 8T49N006A-999NLGI has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDD | Power Supply Voltage | | 2 | GND | Ground | | 3 | OUT | Output Signal | | 4 | OE | Output Enable | | 5 | NC | No Connection | | 6 | SEL | Output Type Selection | | 7 | SDA | I2C Serial Data | | 8 | SCL | I2C Serial Clock |

Functional Characteristics

• Provides high-precision timing signals for various electronic devices.
• Low jitter ensures accurate synchronization between different components.
• Supports multiple output types for compatibility with different systems.
• Output enable feature allows for easy control of signal output.

Advantages and Disadvantages

Advantages: - High precision and low jitter ensure reliable timing performance. - Multiple output types provide flexibility in system integration. - Output enable feature allows for efficient power management.

Disadvantages: - Limited frequency range compared to some other timing devices. - Requires external control for proper operation.

Applicable Range of Products

The 8T49N006A-999NLGI is suitable for use in various electronic devices that require precise timing signals, such as: - Communication equipment - Networking devices - Industrial automation systems - Consumer electronics

Working Principles

The 8T49N006A-999NLGI utilizes a crystal oscillator to generate high-frequency timing signals. These signals are then divided and processed to provide accurate timing outputs. The device can be configured and controlled through the I2C interface.

Detailed Application Field Plans

The 8T49N006A-999NLGI can be used in the following application fields: 1. Telecommunications: Provides precise timing for network synchronization. 2. Data Centers: Ensures accurate clocking for data transmission and processing. 3. Test and Measurement Equipment: Enables precise timebase generation for accurate measurements. 4. Automotive Electronics: Supports timing requirements in automotive communication systems. 5. Consumer Electronics: Provides stable timing signals for audio/video synchronization.

Detailed Alternative Models

Some alternative models to the 8T49N006A-999NLGI include: - 8T49N001 - 8T49N002 - 8T49N003 - 8T49N004 - 8T49N005

5 Common Technical Questions and Answers

1. Q: What is the operating voltage range of the 8T49N006A-999NLGI? A: The operating voltage range is 1.8 V to 3.3 V.

2. Q: Can the output type be changed on-the-fly? A: Yes, the output type can be selected through the SEL pin.

3. Q: What is the frequency range of the 8T49N006A-999NLGI? A: The frequency range is from 1 MHz to 220 MHz.

4. Q: Does the device support I2C interface for configuration? A: Yes, the device can be configured and controlled through the I2C interface using the SDA and SCL pins.

5. Q: What is the package type of the 8T49N006A-999NLGI? A: The device is available in a surface mount package.

This encyclopedia entry provides detailed information about the 8T49N006A-999NLGI timing device, including its basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, application field plans, alternative models, and common technical questions and answers.