IDT71V3577YS75PF8
Product Overview
- Category: Integrated Circuit (IC)
- Use: Memory device
- Characteristics: High-speed, low-power, synchronous static RAM (SRAM)
- Package: 100-pin Thin Quad Flat Pack (TQFP)
- Essence: Provides high-performance memory storage for various electronic devices
- Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements
Specifications
- Memory Type: Synchronous SRAM
- Memory Size: 4 Megabits (4Mb)
- Organization: 512K words x 8 bits
- Operating Voltage: 3.3V
- Access Time: 7.5 ns
- Clock Frequency: Up to 133 MHz
- Data Retention: Greater than 10 years
- Operating Temperature Range: -40°C to +85°C
Pin Configuration
The IDT71V3577YS75PF8 has a total of 100 pins. The detailed pin configuration is as follows:
- VCCQ
- DQ0
- DQ1
- DQ2
- DQ3
- DQ4
- DQ5
- DQ6
- DQ7
- GND
- A0
- A1
- A2
- A3
- A4
- A5
- A6
- A7
- A8
- A9
- A10
- A11
- A12
- A13
- A14
- A15
- A16
- A17
- A18
- A19
- A20
- A21
- A22
- A23
- A24
- A25
- A26
- A27
- A28
- A29
- A30
- A31
- A32
- A33
- A34
- A35
- A36
- A37
- A38
- A39
- A40
- A41
- A42
- A43
- A44
- A45
- A46
- A47
- A48
- A49
- A50
- A51
- A52
- A53
- A54
- A55
- A56
- A57
- A58
- A59
- A60
- A61
- A62
- A63
- A64
- A65
- A66
- A67
- A68
- A69
- A70
- A71
- A72
- A73
- A74
- A75
- A76
- A77
- A78
- A79
- A80
- A81
- A82
- A83
- A84
- A85
- A86
- A87
- A88
- VCC
Functional Features
- High-speed operation allows for quick data access and retrieval.
- Low-power consumption ensures efficient energy usage.
- Synchronous design enables synchronized data transfers.
- Reliable and stable performance in various operating conditions.
- Easy integration into electronic systems due to standard interface protocols.
Advantages
- Fast access time enhances overall system performance.
- Low power consumption prolongs battery life in portable devices.
- High reliability ensures data integrity and system stability.
- Synchronous operation simplifies system design and timing control.
Disadvantages
- Limited memory size compared to other storage technologies.
- Higher cost per bit compared to non-volatile memory options.
- Vulnerable to data loss in case of power failure without proper backup mechanisms.
Working Principles
The IDT71V3577YS75PF8 operates as a synchronous SRAM, utilizing a clock signal for synchronized data transfers. It stores and retrieves data using an array of memory cells organized in a specific configuration. The device communicates with the external system through its input/output pins, allowing for data exchange between the memory and the controlling circuitry.
Application Field Plans
The IDT71V3577YS75PF8 is commonly used in various electronic systems that require high-speed and reliable memory storage. Some potential application fields include:
기술 솔루션에 IDT71V3577YS75PF8 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of IDT71V3577YS75PF8 in technical solutions:
Question: What is the IDT71V3577YS75PF8?
Answer: The IDT71V3577YS75PF8 is a high-speed, low-power CMOS synchronous static RAM (SRAM) with a capacity of 4 Meg x 18.Question: What are the key features of the IDT71V3577YS75PF8?
Answer: Some key features include a synchronous interface, fast access times, low power consumption, and a wide operating voltage range.Question: What is the typical application of the IDT71V3577YS75PF8?
Answer: This SRAM is commonly used in networking equipment, telecommunications systems, industrial automation, and other high-performance applications that require large memory capacity.Question: What is the operating voltage range for the IDT71V3577YS75PF8?
Answer: The operating voltage range is typically between 3.0V and 3.6V.Question: What is the maximum clock frequency supported by the IDT71V3577YS75PF8?
Answer: The maximum clock frequency is 166 MHz.Question: Does the IDT71V3577YS75PF8 support burst mode operation?
Answer: Yes, it supports burst mode operation with programmable burst lengths.Question: What is the power consumption of the IDT71V3577YS75PF8?
Answer: The power consumption varies depending on the operating conditions, but it is generally low due to its low-power CMOS design.Question: Can the IDT71V3577YS75PF8 operate in a wide temperature range?
Answer: Yes, it is designed to operate in a wide temperature range, typically between -40°C and +85°C.Question: Does the IDT71V3577YS75PF8 have any built-in error correction capabilities?
Answer: No, this SRAM does not have built-in error correction capabilities. However, external error correction techniques can be implemented if required.Question: What package options are available for the IDT71V3577YS75PF8?
Answer: The IDT71V3577YS75PF8 is available in a 100-pin TQFP (Thin Quad Flat Package) and a 119-ball BGA (Ball Grid Array) package.
Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's specifications for the IDT71V3577YS75PF8.