Infineon Technologies
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
C167CSL16M3VCAFXQLA2

C167CSL16M3VCAFXQLA2

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, automotive applications
  • Characteristics: High-performance, low-power consumption, integrated peripherals
  • Package: QFP (Quad Flat Package)
  • Essence: Central processing unit for controlling and managing electronic devices
  • Packaging/Quantity: Typically sold individually or in small quantities

Specifications

  • Model: C167CSL16M3VCAFXQLA2
  • Architecture: 16-bit
  • Clock Speed: 16 MHz
  • Flash Memory: 256 KB
  • RAM: 16 KB
  • Operating Voltage: 3.3 V
  • I/O Pins: 48
  • Communication Interfaces: UART, SPI, I2C, CAN
  • Timers/Counters: 6
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution

Detailed Pin Configuration

The C167CSL16M3VCAFXQLA2 microcontroller has a total of 48 pins. The pin configuration is as follows:

  1. P0.0 - GPIO
  2. P0.1 - GPIO
  3. P0.2 - GPIO
  4. P0.3 - GPIO
  5. P0.4 - GPIO
  6. P0.5 - GPIO
  7. P0.6 - GPIO
  8. P0.7 - GPIO
  9. P1.0 - GPIO
  10. P1.1 - GPIO
  11. P1.2 - GPIO
  12. P1.3 - GPIO
  13. P1.4 - GPIO
  14. P1.5 - GPIO
  15. P1.6 - GPIO
  16. P1.7 - GPIO
  17. P2.0 - GPIO
  18. P2.1 - GPIO
  19. P2.2 - GPIO
  20. P2.3 - GPIO
  21. P2.4 - GPIO
  22. P2.5 - GPIO
  23. P2.6 - GPIO
  24. P2.7 - GPIO
  25. P3.0 - GPIO
  26. P3.1 - GPIO
  27. P3.2 - GPIO
  28. P3.3 - GPIO
  29. P3.4 - GPIO
  30. P3.5 - GPIO
  31. P3.6 - GPIO
  32. P3.7 - GPIO
  33. P4.0 - GPIO
  34. P4.1 - GPIO
  35. P4.2 - GPIO
  36. P4.3 - GPIO
  37. P4.4 - GPIO
  38. P4.5 - GPIO
  39. P4.6 - GPIO
  40. P4.7 - GPIO
  41. P5.0 - GPIO
  42. P5.1 - GPIO
  43. P5.2 - GPIO
  44. P5.3 - GPIO
  45. P5.4 - GPIO
  46. P5.5 - GPIO
  47. P5.6 - GPIO
  48. P5.7 - GPIO

Functional Features

  • High-performance 16-bit architecture for efficient processing
  • Low-power consumption for extended battery life in portable applications
  • Integrated peripherals such as UART, SPI, I2C, and CAN for communication
  • Timers/Counters for precise timing and event management
  • Analog-to-Digital Converter (ADC) for analog signal acquisition

Advantages and Disadvantages

Advantages: - High-performance processing capabilities - Low-power consumption for energy-efficient designs - Integrated peripherals simplify system design and reduce external component count - Suitable for automotive applications due to robustness and reliability

Disadvantages: - Limited flash memory and RAM compared to newer microcontrollers - 16-bit architecture may not be suitable for certain complex applications - Availability of alternative models with more advanced features

Working Principles

The C167CSL16M3VCAFXQLA2 microcontroller operates based on the Von Neumann architecture. It consists of a central processing unit (CPU), memory, and various peripherals. The CPU executes instructions stored in the flash memory and interacts with peripherals to control and manage electronic devices. The microcontroller communicates with external devices through its communication interfaces and performs tasks according to the program instructions.

Detailed Application Field Plans

The C167CSL16M3VCAFXQLA2 microcontroller is commonly used in the following application fields: 1. Automotive systems: Engine control units, transmission control modules, body control modules, etc. 2. Industrial automation: Programmable logic controllers, motor control systems, human-machine interfaces, etc. 3. Consumer electronics: Home appliances, gaming consoles, audio/video equipment, etc. 4. Medical devices

기술 솔루션에 C167CSL16M3VCAFXQLA2 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of C167CSL16M3VCAFXQLA2 in technical solutions:

  1. Q: What is the C167CSL16M3VCAFXQLA2 microcontroller used for? A: The C167CSL16M3VCAFXQLA2 microcontroller is commonly used in various technical solutions, such as automotive systems, industrial automation, and control applications.

  2. Q: What is the maximum clock frequency supported by the C167CSL16M3VCAFXQLA2? A: The C167CSL16M3VCAFXQLA2 microcontroller supports a maximum clock frequency of 25 MHz.

  3. Q: How much flash memory does the C167CSL16M3VCAFXQLA2 have? A: The C167CSL16M3VCAFXQLA2 microcontroller has 256 KB of flash memory.

  4. Q: Can I expand the memory of the C167CSL16M3VCAFXQLA2? A: Yes, the C167CSL16M3VCAFXQLA2 microcontroller supports external memory expansion through its memory interface.

  5. Q: What peripherals are available on the C167CSL16M3VCAFXQLA2? A: The C167CSL16M3VCAFXQLA2 microcontroller offers various peripherals, including UARTs, SPI, I2C, CAN, ADC, PWM, and timers.

  6. Q: Is the C167CSL16M3VCAFXQLA2 suitable for real-time applications? A: Yes, the C167CSL16M3VCAFXQLA2 microcontroller is designed for real-time applications and offers features like interrupt handling and timers.

  7. Q: What is the operating voltage range of the C167CSL16M3VCAFXQLA2? A: The C167CSL16M3VCAFXQLA2 microcontroller operates within a voltage range of 3.0V to 5.5V.

  8. Q: Can I use the C167CSL16M3VCAFXQLA2 in automotive applications? A: Yes, the C167CSL16M3VCAFXQLA2 microcontroller is commonly used in automotive systems due to its robustness and reliability.

  9. Q: Does the C167CSL16M3VCAFXQLA2 support communication protocols like CAN and LIN? A: Yes, the C167CSL16M3VCAFXQLA2 microcontroller has built-in support for CAN (Controller Area Network) and LIN (Local Interconnect Network) protocols.

  10. Q: Is the C167CSL16M3VCAFXQLA2 suitable for low-power applications? A: Yes, the C167CSL16M3VCAFXQLA2 microcontroller offers various power-saving modes and features, making it suitable for low-power applications.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and the application requirements.