Infineon Technologies
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
IFX1763XEJV33XUMA1
자세히보기 데이터시트

IFX1763XEJV33XUMA1

Product Overview

Category

IFX1763XEJV33XUMA1 belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits and systems.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Overcurrent and overtemperature protection
  • Wide input voltage range

Package

The IFX1763XEJV33XUMA1 comes in a small outline package (SOP) with 8 pins.

Essence

The essence of IFX1763XEJV33XUMA1 lies in its ability to provide stable and regulated voltage for various electronic applications.

Packaging/Quantity

The IFX1763XEJV33XUMA1 is typically packaged in reels and is available in quantities suitable for both prototyping and production.

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 150mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. NC (No Connection)
  5. NC (No Connection)
  6. EN (Enable)
  7. NC (No Connection)
  8. NC (No Connection)

Functional Features

  • Voltage Regulation
  • Overcurrent Protection
  • Overtemperature Protection
  • Enable/Shutdown Control

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Wide input voltage range
  • Overcurrent and overtemperature protection enhance system reliability

Disadvantages

  • Limited maximum output current compared to some alternative models
  • Higher dropout voltage than certain competing products

Working Principles

The IFX1763XEJV33XUMA1 operates by comparing the output voltage to a reference voltage and adjusting the internal circuitry to maintain a stable output voltage despite variations in input voltage and load conditions. The overcurrent and overtemperature protection mechanisms ensure the safety and reliability of the device and the connected circuitry.

Detailed Application Field Plans

The IFX1763XEJV33XUMA1 is well-suited for use in battery-powered devices, portable electronics, and low-power microcontroller-based systems. Its wide input voltage range and low dropout voltage make it ideal for applications where the input voltage may vary significantly, and energy efficiency is crucial.

Detailed and Complete Alternative Models

Some alternative models to IFX1763XEJV33XUMA1 include: - LM1117 - MCP1700 - AP2112

These alternatives offer varying specifications and features, providing options for different application requirements.

In conclusion, the IFX1763XEJV33XUMA1 is a versatile voltage regulator with precise regulation, robust protection features, and a wide range of potential applications.

Word Count: 411

기술 솔루션에 IFX1763XEJV33XUMA1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is IFX1763XEJV33XUMA1?

    • IFX1763XEJV33XUMA1 is a voltage regulator IC (integrated circuit) designed for use in various technical solutions to provide stable and regulated power supply.

  2. What are the key features of IFX1763XEJV33XUMA1?

    • The key features of IFX1763XEJV33XUMA1 include a wide input voltage range, high efficiency, low dropout voltage, and overcurrent protection.

  3. In what applications can IFX1763XEJV33XUMA1 be used?

    • IFX1763XEJV33XUMA1 can be used in a wide range of applications including industrial automation, automotive electronics, consumer electronics, and power management systems.

  4. What is the typical output voltage of IFX1763XEJV33XUMA1?

    • The typical output voltage of IFX1763XEJV33XUMA1 is 3.3V, making it suitable for powering microcontrollers, sensors, and other electronic components.

  5. How does IFX1763XEJV33XUMA1 ensure stability in power supply?

    • IFX1763XEJV33XUMA1 utilizes advanced control mechanisms and feedback loops to maintain a stable output voltage even under varying load conditions.

  6. Does IFX1763XEJV33XUMA1 have built-in thermal protection?

    • Yes, IFX1763XEJV33XUMA1 incorporates thermal shutdown protection to prevent overheating and ensure reliable operation.

  7. What is the maximum current rating of IFX1763XEJV33XUMA1?

    • The maximum current rating of IFX1763XEJV33XUMA1 is typically [insert value here] amps, allowing it to power a wide range of loads.

  8. Can IFX1763XEJV33XUMA1 operate in harsh environmental conditions?

    • Yes, IFX1763XEJV33XUMA1 is designed to withstand harsh environmental conditions, making it suitable for use in rugged industrial and automotive applications.

  9. Are there any specific layout considerations for using IFX1763XEJV33XUMA1?

    • It is recommended to follow the manufacturer's guidelines for PCB layout and thermal management to optimize the performance of IFX1763XEJV33XUMA1.

  10. Where can I find detailed technical specifications and application notes for IFX1763XEJV33XUMA1?

    • Detailed technical specifications and application notes for IFX1763XEJV33XUMA1 can be found on the manufacturer's website or in the product datasheet.