이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
TLE7469GV52AUMA1

TLE7469GV52AUMA1

Product Overview

Category

TLE7469GV52AUMA1 belongs to the category of integrated circuits (ICs).

Use

This product is primarily used for power management applications.

Characteristics

  • The TLE7469GV52AUMA1 is a highly efficient voltage regulator.
  • It offers low dropout voltage, making it suitable for applications with tight voltage requirements.
  • This IC provides excellent load and line regulation, ensuring stable output voltage.
  • It has built-in protection features such as overcurrent and thermal shutdown.

Package

The TLE7469GV52AUMA1 comes in a small package, typically a surface-mount device (SMD) package.

Essence

The essence of this product lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

The TLE7469GV52AUMA1 is usually packaged in reels or tubes, containing a specific quantity of ICs per package.

Specifications

  • Input Voltage Range: 2.7V to 40V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 45µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TLE7469GV52AUMA1 has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. VOUT: Output voltage pin
  5. FB: Feedback pin
  6. PG: Power good pin

Functional Features

  • High efficiency voltage regulation
  • Low dropout voltage
  • Excellent load and line regulation
  • Overcurrent protection
  • Thermal shutdown protection
  • Power good indication

Advantages and Disadvantages

Advantages

  • High efficiency ensures minimal power loss.
  • Low dropout voltage allows for precise voltage regulation.
  • Excellent load and line regulation provide stable output voltage.
  • Built-in protection features enhance reliability.

Disadvantages

  • Limited maximum output current of 500mA may not be suitable for high-power applications.
  • The small package size may require careful handling during assembly.

Working Principles

The TLE7469GV52AUMA1 operates as a linear voltage regulator. It takes an input voltage within the specified range and regulates it to a desired output voltage. The internal circuitry ensures that the output voltage remains stable even with varying input voltages and loads. The IC also incorporates protection mechanisms such as overcurrent and thermal shutdown to safeguard against potential damage.

Detailed Application Field Plans

The TLE7469GV52AUMA1 finds applications in various fields, including but not limited to:

  1. Automotive: Used in vehicle electronics for power management, ensuring stable voltage supply to critical components.
  2. Industrial: Employed in industrial automation systems to regulate voltage for sensors, actuators, and control circuits.
  3. Consumer Electronics: Integrated into portable devices like smartphones and tablets to maintain consistent power delivery.
  4. Telecommunications: Utilized in network equipment and communication devices to ensure reliable power supply.

Detailed and Complete Alternative Models

  1. TPS7A4700: A similar voltage regulator with higher maximum output current (1A) and adjustable output voltage.
  2. LM1117: Another popular linear voltage regulator with a wide input voltage range and adjustable output voltage.
  3. LT1763: A low dropout voltage regulator with excellent load and line regulation characteristics.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 523 words

기술 솔루션에 TLE7469GV52AUMA1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of TLE7469GV52AUMA1 in technical solutions:

Q1: What is TLE7469GV52AUMA1? A1: TLE7469GV52AUMA1 is a power management integrated circuit (PMIC) designed for automotive applications, providing multiple voltage rails and various protection features.

Q2: What are the key features of TLE7469GV52AUMA1? A2: Some key features of TLE7469GV52AUMA1 include multiple voltage regulators, overvoltage/undervoltage protection, thermal shutdown, fault diagnostics, and I2C communication interface.

Q3: What are the typical applications of TLE7469GV52AUMA1? A3: TLE7469GV52AUMA1 is commonly used in automotive electronic systems such as infotainment systems, instrument clusters, body control modules, and lighting systems.

Q4: How many voltage regulators does TLE7469GV52AUMA1 have? A4: TLE7469GV52AUMA1 has six voltage regulators, providing different output voltages to power various components in the system.

Q5: Can TLE7469GV52AUMA1 handle high current loads? A5: Yes, TLE7469GV52AUMA1 can handle high current loads with its robust design and built-in protection features.

Q6: Does TLE7469GV52AUMA1 support communication with a microcontroller? A6: Yes, TLE7469GV52AUMA1 supports communication via an I2C interface, allowing control and monitoring of the PMIC from a microcontroller.

Q7: What protection features does TLE7469GV52AUMA1 offer? A7: TLE7469GV52AUMA1 offers overvoltage protection, undervoltage protection, thermal shutdown, and fault diagnostics to ensure safe operation of the system.

Q8: Can TLE7469GV52AUMA1 operate in a wide temperature range? A8: Yes, TLE7469GV52AUMA1 is designed to operate in a wide temperature range, typically from -40°C to 125°C.

Q9: Is TLE7469GV52AUMA1 compliant with automotive industry standards? A9: Yes, TLE7469GV52AUMA1 is compliant with various automotive industry standards such as AEC-Q100, ensuring its reliability and suitability for automotive applications.

Q10: Are evaluation boards or reference designs available for TLE7469GV52AUMA1? A10: Yes, evaluation boards and reference designs are available for TLE7469GV52AUMA1, which can help developers quickly prototype and integrate the PMIC into their systems.

Please note that these questions and answers are general and may vary depending on specific requirements and use cases.