Intersil
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
HIP6311ACB
자세히보기 데이터시트

HIP6311ACB

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: 16-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Regulator IC for Power Supply Applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 3A
  • Quiescent Current: 50µA
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. SS: Soft-Start Pin
  6. PGND: Power Ground
  7. SW: Switch Node
  8. SW: Switch Node
  9. SW: Switch Node
  10. SW: Switch Node
  11. VOUT: Output Voltage
  12. VOUT: Output Voltage
  13. VOUT: Output Voltage
  14. VOUT: Output Voltage
  15. NC: No Connection
  16. VIN: Input Voltage

Functional Features

  • Wide input voltage range allows flexibility in power supply design.
  • High efficiency ensures minimal power loss during operation.
  • Low quiescent current reduces standby power consumption.
  • Soft-start feature prevents excessive inrush current during startup.
  • Overcurrent protection safeguards the circuit from damage.

Advantages and Disadvantages

Advantages: - High efficiency leads to energy savings. - Wide input voltage range provides versatility. - Compact package size saves board space. - Overcurrent protection enhances system reliability.

Disadvantages: - Limited maximum output current may restrict certain applications. - Operating temperature range may not be suitable for extreme environments.

Working Principles

The HIP6311ACB is a regulator IC that utilizes a switching topology to efficiently convert the input voltage to a regulated output voltage. It employs a pulse-width modulation (PWM) control scheme to adjust the duty cycle of the internal power switch, enabling precise voltage regulation. The soft-start feature gradually ramps up the output voltage to prevent excessive inrush current during startup.

Detailed Application Field Plans

The HIP6311ACB is commonly used in various power supply applications, including:

  1. Consumer Electronics: Powering portable devices such as smartphones, tablets, and laptops.
  2. Industrial Equipment: Providing stable power for control systems, motor drives, and sensors.
  3. Automotive Electronics: Regulating voltage for infotainment systems, lighting, and engine control units.
  4. Telecommunications: Powering network equipment, routers, and base stations.
  5. LED Lighting: Driving LED strips, bulbs, and fixtures with efficient power conversion.

Detailed and Complete Alternative Models

  1. HIP6310ACB: Similar specifications but with a lower maximum output current of 2A.
  2. HIP6312ACB: Similar specifications but with a higher maximum output current of 4A.
  3. HIP6313ACB: Similar specifications but with an extended operating temperature range of -40°C to +125°C.

(Note: These alternative models are provided for reference and may have slight differences in features and performance.)

Word count: 345 words

기술 솔루션에 HIP6311ACB 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. Question: What is HIP6311ACB?
    Answer: HIP6311ACB is a high-performance, low-noise, low-dropout voltage regulator designed for use in various technical solutions.

  2. Question: What is the input voltage range for HIP6311ACB?
    Answer: The input voltage range for HIP6311ACB is typically 2.5V to 5.5V.

  3. Question: What is the output voltage accuracy of HIP6311ACB?
    Answer: The output voltage accuracy of HIP6311ACB is typically ±1%.

  4. Question: What is the maximum output current of HIP6311ACB?
    Answer: The maximum output current of HIP6311ACB is typically 300mA.

  5. Question: What are the typical applications of HIP6311ACB?
    Answer: HIP6311ACB is commonly used in battery-powered devices, portable equipment, and other low-voltage systems.

  6. Question: Does HIP6311ACB have built-in thermal shutdown protection?
    Answer: Yes, HIP6311ACB features built-in thermal shutdown protection to prevent overheating.

  7. Question: Is HIP6311ACB suitable for noise-sensitive applications?
    Answer: Yes, HIP6311ACB is designed to be low-noise, making it suitable for noise-sensitive applications.

  8. Question: What package options are available for HIP6311ACB?
    Answer: HIP6311ACB is available in a variety of package options, including SOT-23 and WLCSP.

  9. Question: Can HIP6311ACB operate in a wide temperature range?
    Answer: Yes, HIP6311ACB is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  10. Question: Are there any recommended external components for using HIP6311ACB?
    Answer: Yes, typical external components include input and output capacitors to ensure stability and performance.