Intersil
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ISL62881BHRTZ-T
자세히보기 데이터시트

ISL62881BHRTZ-T

Product Overview

Category

ISL62881BHRTZ-T belongs to the category of voltage regulators.

Use

It is commonly used in electronic devices to regulate and stabilize voltage levels.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

ISL62881BHRTZ-T is available in a small package, typically a 32-pin QFN (Quad Flat No-Lead) package.

Essence

The essence of ISL62881BHRTZ-T is its ability to provide stable and regulated voltage to electronic circuits.

Packaging/Quantity

ISL62881BHRTZ-T is usually packaged in reels or tubes, with a quantity of around 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.6V to 5.5V
  • Output Current: Up to 8A
  • Dropout Voltage: 200mV at 3A
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. EN: Enable pin to control the regulator's operation
  5. VOUT: Output voltage pin
  6. COMP: Compensation pin for stability control
  7. SS: Soft-start pin for gradual voltage ramp-up
  8. PG: Power good indicator pin
  9. BST: Bootstrap capacitor connection pin
  10. SW: Switching node pin

(Note: The pin configuration may vary depending on the specific package variant.)

Functional Features

  • Voltage regulation: ISL62881BHRTZ-T ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the current to prevent damage.
  • Thermal shutdown protection: The regulator shuts down when it reaches a certain temperature threshold to avoid overheating.
  • Adjustable output voltage: The output voltage can be adjusted within a specified range to meet different requirements.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Wide input voltage range allows compatibility with various power sources.
  • Low dropout voltage minimizes energy loss.
  • Overcurrent and thermal shutdown protection enhance system reliability.
  • Adjustable output voltage provides flexibility in design.

Disadvantages

  • May require additional external components for specific applications.
  • Limited output current compared to some high-power regulators.
  • Higher cost compared to basic linear regulators.

Working Principles

ISL62881BHRTZ-T operates based on a switching regulator topology. It utilizes pulse-width modulation (PWM) techniques to regulate the output voltage. The input voltage is converted into a high-frequency square wave, which is then filtered and regulated to provide a stable output voltage.

Detailed Application Field Plans

ISL62881BHRTZ-T finds applications in various electronic devices, including but not limited to: - Laptops and notebooks - Desktop computers - Servers - Industrial equipment - Telecommunications devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL62881BHRTZ-T are: - LM2596 - LT1084 - TPS5430 - ADP2303 - MAX15062

(Note: The suitability of alternative models may vary depending on specific requirements and application scenarios.)

In conclusion, ISL62881BHRTZ-T is a voltage regulator with high efficiency, wide input voltage range, and adjustable output voltage. It offers overcurrent and thermal shutdown protection, making it suitable for various electronic devices. While it has some limitations, it provides stable voltage regulation and is widely used in different application fields.

기술 솔루션에 ISL62881BHRTZ-T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of ISL62881BHRTZ-T in technical solutions:

  1. Q: What is ISL62881BHRTZ-T? A: ISL62881BHRTZ-T is a high-performance, multiphase buck controller IC designed for powering advanced microprocessors.

  2. Q: What are the key features of ISL62881BHRTZ-T? A: Some key features include adaptive voltage positioning, integrated MOSFET drivers, precision DCR current sensing, and programmable switching frequency.

  3. Q: What is the typical input voltage range for ISL62881BHRTZ-T? A: The typical input voltage range is from 4.5V to 28V.

  4. Q: What is the output voltage range supported by ISL62881BHRTZ-T? A: The output voltage range can be programmed from 0.6V to 5.5V.

  5. Q: How many phases does ISL62881BHRTZ-T support? A: ISL62881BHRTZ-T supports up to 6 phases, allowing for higher power delivery and improved efficiency.

  6. Q: Can ISL62881BHRTZ-T operate in a synchronous rectification mode? A: Yes, it supports both synchronous and asynchronous rectification modes.

  7. Q: Does ISL62881BHRTZ-T have any protection features? A: Yes, it includes various protection features such as overcurrent protection, overvoltage protection, undervoltage lockout, and thermal shutdown.

  8. Q: What is the maximum switching frequency of ISL62881BHRTZ-T? A: The maximum switching frequency is typically 1MHz.

  9. Q: Can ISL62881BHRTZ-T be used in automotive applications? A: Yes, it is suitable for automotive applications and meets the necessary standards.

  10. Q: What are some typical applications of ISL62881BHRTZ-T? A: It is commonly used in high-performance computing systems, servers, gaming consoles, and other power-hungry devices that require efficient voltage regulation.

Please note that these answers are general and may vary depending on specific use cases and requirements.