Intersil
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ISL6336DIRZ
자세히보기 데이터시트

ISL6336DIRZ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: High efficiency, compact size, low noise
  • Package: DFN (Dual Flat No-Lead)
  • Essence: Power management solution for various electronic devices
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage: 4.5V to 28V
  • Output Voltage: 0.6V to 5.5V
  • Output Current: Up to 6A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ISL6336DIRZ has a total of 20 pins. The pin configuration is as follows:

  1. VIN: Input voltage
  2. GND: Ground
  3. VCC: Supply voltage
  4. FB1: Feedback input for channel 1
  5. COMP1: Compensation node for channel 1
  6. LGATE1: Low-side gate driver output for channel 1
  7. PGND1: Power ground for channel 1
  8. BOOT1: Bootstrap capacitor connection for channel 1
  9. PHASE1: Phase node for channel 1
  10. UGATE1: High-side gate driver output for channel 1
  11. AGND: Analog ground
  12. SS: Soft-start capacitor connection
  13. COMP2: Compensation node for channel 2
  14. FB2: Feedback input for channel 2
  15. LGATE2: Low-side gate driver output for channel 2
  16. PGND2: Power ground for channel 2
  17. BOOT2: Bootstrap capacitor connection for channel 2
  18. PHASE2: Phase node for channel 2
  19. UGATE2: High-side gate driver output for channel 2
  20. VOUT: Output voltage

Functional Features

  • Dual-channel synchronous buck controller
  • Adaptive voltage positioning (AVP) for improved efficiency
  • Programmable switching frequency
  • Overcurrent protection
  • Soft-start and soft-stop functionality
  • Power-good indicator

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Compact size for space-constrained applications - Low noise output - Flexible switching frequency adjustment

Disadvantages: - Limited input voltage range (4.5V to 28V) - Maximum output current limited to 6A

Working Principles

The ISL6336DIRZ is a dual-channel synchronous buck controller designed for voltage regulation in electronic devices. It operates by converting a higher input voltage to a lower output voltage with high efficiency. The adaptive voltage positioning (AVP) feature ensures optimal performance by dynamically adjusting the output voltage based on load conditions.

The controller utilizes a switching mechanism at a programmable frequency to regulate the output voltage. It provides protection against overcurrent conditions, ensuring the safety of the connected devices. The soft-start and soft-stop functionality allows for gradual power-up and shutdown, reducing stress on the components.

Detailed Application Field Plans

The ISL6336DIRZ is widely used in various applications that require efficient voltage regulation. Some common application fields include:

  1. Computer motherboards
  2. Graphics cards
  3. Industrial automation systems
  4. Telecommunications equipment
  5. Consumer electronics

Detailed and Complete Alternative Models

  1. ISL6336CIRZ: Similar to ISL6336DIRZ, but with extended operating temperature range (-40°C to +125°C).
  2. ISL6336EIRZ: Enhanced version with additional protection features and wider input voltage range (2.7V to 28V).
  3. ISL6336FIRZ: Higher output current capability (up to 10A) compared to ISL6336DIRZ.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Note: The content provided above is approximately 400 words. Additional information needs to be added to meet the required word count of 1100 words.

기술 솔루션에 ISL6336DIRZ 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of ISL6336DIRZ in technical solutions:

  1. Q: What is ISL6336DIRZ? A: ISL6336DIRZ is a highly integrated dual synchronous buck controller designed for high-performance power supply applications.

  2. Q: What is the input voltage range supported by ISL6336DIRZ? A: The input voltage range supported by ISL6336DIRZ is typically between 4.5V and 25V.

  3. Q: What is the output voltage range that can be achieved using ISL6336DIRZ? A: The output voltage range that can be achieved using ISL6336DIRZ depends on the external components used, but it is typically between 0.6V and 5.5V.

  4. Q: Can ISL6336DIRZ support multiple outputs? A: Yes, ISL6336DIRZ can support multiple outputs by configuring it in a multi-phase operation.

  5. Q: What is the maximum current that ISL6336DIRZ can handle? A: ISL6336DIRZ can handle a maximum current of up to 20A per phase.

  6. Q: Does ISL6336DIRZ have any built-in protection features? A: Yes, ISL6336DIRZ has various built-in protection features such as overcurrent protection, overvoltage protection, undervoltage lockout, and thermal shutdown.

  7. Q: Can ISL6336DIRZ operate in a wide temperature range? A: Yes, ISL6336DIRZ can operate in a wide temperature range, typically from -40°C to +85°C.

  8. Q: Is ISL6336DIRZ suitable for high-frequency applications? A: Yes, ISL6336DIRZ is designed to operate at high switching frequencies, making it suitable for high-frequency applications.

  9. Q: What type of control method does ISL6336DIRZ use? A: ISL6336DIRZ uses voltage mode control with adjustable frequency and duty cycle.

  10. Q: Can ISL6336DIRZ be used in both step-up and step-down applications? A: No, ISL6336DIRZ is specifically designed for step-down (buck) applications and cannot be used for step-up (boost) applications.

Please note that the answers provided here are general and may vary depending on specific application requirements and design considerations.