이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ISL6549IBZ

ISL6549IBZ

Product Overview

Category

ISL6549IBZ belongs to the category of integrated circuits (ICs).

Use

The ISL6549IBZ is commonly used as a voltage regulator in various electronic devices and systems.

Characteristics

  • Integrated circuit
  • Voltage regulator
  • High efficiency
  • Low power consumption
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection

Package

ISL6549IBZ is available in a small outline package (SOIC) with 8 pins.

Essence

The essence of ISL6549IBZ lies in its ability to regulate voltage efficiently and reliably, ensuring stable power supply to electronic components.

Packaging/Quantity

ISL6549IBZ is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 5.5V
  • Output Voltage Range: 0.8V to 3.3V
  • Maximum Output Current: 2A
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Quiescent Current: 100µA

Pin Configuration

The ISL6549IBZ has the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. FB: Feedback voltage
  4. COMP: Compensation
  5. SS/TR: Soft-start/Tracking
  6. EN: Enable
  7. VCC: Supply voltage
  8. VOUT: Output voltage

Functional Features

  • Voltage regulation
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start and tracking capability
  • Enable/disable control

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatile applications
  • Adjustable output voltage provides flexibility
  • Overcurrent protection ensures device and system safety
  • Thermal shutdown protection prevents overheating

Disadvantages

  • Limited maximum output current (2A)
  • Requires external components for complete functionality
  • Sensitive to voltage fluctuations

Working Principles

The ISL6549IBZ operates based on a pulse-width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the internal power switch. The feedback voltage is compared with a reference voltage, and the error signal is used to control the power switch. This process ensures that the output voltage remains within the desired range.

Detailed Application Field Plans

ISL6549IBZ finds applications in various electronic devices and systems, including but not limited to: - Power supplies - Battery chargers - Industrial automation equipment - Telecommunications systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to ISL6549IBZ that offer similar functionality are: - LM2576-ADJ - LT1084CP-5 - TPS5430DDAR

These models can be considered as alternatives depending on specific requirements and design constraints.

Word count: 400 words

기술 솔루션에 ISL6549IBZ 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of ISL6549IBZ in technical solutions:

  1. Q: What is ISL6549IBZ? A: ISL6549IBZ is a high-performance dual synchronous buck controller IC used for voltage regulation in various applications.

  2. Q: What is the input voltage range supported by ISL6549IBZ? A: The input voltage range supported by ISL6549IBZ is typically between 4.5V and 5.5V.

  3. Q: What is the output voltage range that can be achieved using ISL6549IBZ? A: The output voltage range achievable with ISL6549IBZ depends on the external components used, but it can typically range from 0.8V to 5.5V.

  4. Q: Can ISL6549IBZ support multiple outputs? A: Yes, ISL6549IBZ can support multiple outputs by using additional power stages or converters.

  5. Q: What is the maximum switching frequency of ISL6549IBZ? A: The maximum switching frequency of ISL6549IBZ is typically around 1MHz.

  6. Q: Does ISL6549IBZ have built-in protection features? A: Yes, ISL6549IBZ has various built-in protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  7. Q: Can ISL6549IBZ operate in a wide temperature range? A: Yes, ISL6549IBZ is designed to operate in a wide temperature range, typically from -40°C to +85°C.

  8. Q: What type of control method does ISL6549IBZ use? A: ISL6549IBZ uses voltage mode control for regulating the output voltage.

  9. Q: Can ISL6549IBZ be used in battery-powered applications? A: Yes, ISL6549IBZ can be used in battery-powered applications as it supports a wide input voltage range and has low quiescent current.

  10. Q: What are some typical applications of ISL6549IBZ? A: Some typical applications of ISL6549IBZ include power supplies for computer peripherals, telecom equipment, industrial systems, and consumer electronics.

Please note that these answers are general and may vary depending on specific design considerations and requirements.