Intersil
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ISL9014AIRKPZ
자세히보기 데이터시트

ISL9014AIRKPZ

Product Overview

Category

ISL9014AIRKPZ belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low quiescent current
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

ISL9014AIRKPZ comes in a small package, typically a 16-pin QFN (Quad Flat No-leads) package.

Essence

The essence of ISL9014AIRKPZ lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

ISL9014AIRKPZ is usually packaged in reels or tubes, with a typical quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.8V to VIN
  • Quiescent Current: 25µA (typical)
  • Dropout Voltage: 200mV at 300mA load
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. EN: Enable pin
  2. GND: Ground pin
  3. FB: Feedback pin
  4. VOUT: Output voltage pin
  5. VIN: Input voltage pin
  6. PG: Power good indicator pin
  7. NC: No connection
  8. NC: No connection
  9. NC: No connection
  10. NC: No connection
  11. NC: No connection
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection

Functional Features

  • Low dropout voltage
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Power good indicator

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatile applications
  • Adjustable output voltage provides flexibility
  • Overcurrent and thermal protection ensure device safety

Disadvantages

  • Limited output current capacity
  • Higher cost compared to some alternative models

Working Principles

ISL9014AIRKPZ operates by regulating the input voltage to provide a stable output voltage. It utilizes internal circuitry to monitor and adjust the voltage levels, ensuring that the output remains within the desired range. The enable pin (EN) controls the operation of the regulator, allowing it to be turned on or off as needed.

Detailed Application Field Plans

ISL9014AIRKPZ finds application in various electronic devices and systems, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT (Internet of Things) devices - Battery-powered devices

Detailed and Complete Alternative Models

  1. ISL9004AIRKPZ
  2. ISL9008AIRKPZ
  3. ISL9006AIRKPZ
  4. ISL9007AIRKPZ
  5. ISL9009AIRKPZ

These alternative models offer similar functionality and characteristics to ISL9014AIRKPZ, providing options for different requirements and specifications.

(Note: Word count: 408 words)

기술 솔루션에 ISL9014AIRKPZ 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of ISL9014AIRKPZ in technical solutions:

  1. Q: What is ISL9014AIRKPZ? A: ISL9014AIRKPZ is a highly integrated, low dropout (LDO) voltage regulator designed for use in various technical solutions.

  2. Q: What is the input voltage range of ISL9014AIRKPZ? A: The input voltage range of ISL9014AIRKPZ is typically from 2.5V to 5.5V.

  3. Q: What is the output voltage range of ISL9014AIRKPZ? A: The output voltage range of ISL9014AIRKPZ can be adjusted from 0.8V to 3.6V using external resistors.

  4. Q: What is the maximum output current of ISL9014AIRKPZ? A: The maximum output current of ISL9014AIRKPZ is typically 300mA.

  5. Q: Can ISL9014AIRKPZ operate in battery-powered applications? A: Yes, ISL9014AIRKPZ is suitable for battery-powered applications due to its low quiescent current and low dropout voltage.

  6. Q: Does ISL9014AIRKPZ have built-in thermal shutdown protection? A: Yes, ISL9014AIRKPZ incorporates thermal shutdown protection to prevent overheating and damage.

  7. Q: Is ISL9014AIRKPZ compatible with both ceramic and tantalum capacitors? A: Yes, ISL9014AIRKPZ is compatible with both ceramic and tantalum capacitors for input and output filtering.

  8. Q: Can ISL9014AIRKPZ be used in noise-sensitive applications? A: Yes, ISL9014AIRKPZ features excellent power supply rejection ratio (PSRR) and low output noise, making it suitable for noise-sensitive applications.

  9. Q: Does ISL9014AIRKPZ have short-circuit protection? A: Yes, ISL9014AIRKPZ includes short-circuit protection to safeguard against excessive current flow.

  10. Q: What is the operating temperature range of ISL9014AIRKPZ? A: The operating temperature range of ISL9014AIRKPZ is typically from -40°C to +85°C.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.