이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ISL91211AIIZ-T

ISL91211AIIZ-T

Product Overview

Category

ISL91211AIIZ-T belongs to the category of voltage regulators.

Use

It is primarily used for regulating and controlling voltage levels in electronic circuits.

Characteristics

  • High efficiency
  • Low quiescent current
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and overtemperature protection

Package

ISL91211AIIZ-T comes in a small package, typically a surface-mount device (SMD) package.

Essence

The essence of ISL91211AIIZ-T lies in its ability to efficiently regulate voltage levels while consuming minimal power.

Packaging/Quantity

ISL91211AIIZ-T is usually packaged in reels or trays, with a specific quantity per package depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.6V to 3.6V
  • Quiescent Current: 25µA
  • Maximum Output Current: 1.2A
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL91211AIIZ-T has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • High efficiency conversion
  • Low dropout voltage
  • Soft-start capability
  • Overcurrent protection
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatile applications
  • Overcurrent and overtemperature protection ensure safe operation

Disadvantages

  • Limited maximum output current may restrict usage in high-power applications
  • Requires external components for proper operation

Working Principles

ISL91211AIIZ-T operates based on a switching regulator topology. It utilizes pulse-width modulation (PWM) techniques to regulate the output voltage. The input voltage is converted into a high-frequency signal, which is then filtered and regulated to provide a stable output voltage.

Detailed Application Field Plans

ISL91211AIIZ-T finds applications in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Wearable technology - Industrial automation

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL91211AIIZ-T are: - LM317T - LT1084CP - TPS7A4700

These models offer similar functionality and can be used as substitutes depending on specific requirements.

In conclusion, ISL91211AIIZ-T is a voltage regulator with high efficiency, wide input voltage range, and adjustable output voltage. It provides reliable voltage regulation for various electronic applications. However, its limited maximum output current and requirement for external components should be taken into consideration.

기술 솔루션에 ISL91211AIIZ-T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of ISL91211AIIZ-T in technical solutions:

  1. Q: What is ISL91211AIIZ-T? A: ISL91211AIIZ-T is a highly integrated buck-boost switching regulator designed for powering low-voltage microprocessors, FPGAs, and other digital devices.

  2. Q: What is the input voltage range of ISL91211AIIZ-T? A: The input voltage range of ISL91211AIIZ-T is from 2.5V to 5.5V.

  3. Q: What is the output voltage range of ISL91211AIIZ-T? A: The output voltage range of ISL91211AIIZ-T can be adjusted from 0.8V to 4.8V.

  4. Q: What is the maximum output current of ISL91211AIIZ-T? A: The maximum output current of ISL91211AIIZ-T is 2A.

  5. Q: Can ISL91211AIIZ-T operate in both buck and boost modes? A: Yes, ISL91211AIIZ-T can operate in both buck and boost modes, allowing it to regulate the output voltage higher or lower than the input voltage.

  6. Q: Does ISL91211AIIZ-T have built-in protection features? A: Yes, ISL91211AIIZ-T includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  7. Q: What is the efficiency of ISL91211AIIZ-T? A: The efficiency of ISL91211AIIZ-T can reach up to 95%, depending on the input and output voltage conditions.

  8. Q: Can ISL91211AIIZ-T be used in battery-powered applications? A: Yes, ISL91211AIIZ-T is suitable for battery-powered applications due to its low quiescent current and high efficiency.

  9. Q: Does ISL91211AIIZ-T support adjustable output voltage through an external resistor? A: Yes, ISL91211AIIZ-T supports adjustable output voltage through an external resistor connected to the VSET pin.

  10. Q: What package does ISL91211AIIZ-T come in? A: ISL91211AIIZ-T is available in a compact 3mm x 3mm DFN package, making it suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific application and requirements.