Intersil
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ISL95712HRZ
자세히보기 데이터시트

ISL95712HRZ

Product Overview

Category

ISL95712HRZ belongs to the category of integrated circuits (ICs).

Use

The ISL95712HRZ is primarily used as a voltage regulator in electronic devices.

Characteristics

  • Integrated circuit
  • Voltage regulator
  • High reliability
  • Low power consumption

Package

The ISL95712HRZ comes in a small outline package (SOIC) with 8 pins.

Essence

The essence of the ISL95712HRZ is to regulate and stabilize the voltage supplied to electronic components within a device.

Packaging/Quantity

The ISL95712HRZ is typically packaged in reels and each reel contains 2500 units.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 1.2A
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ISL95712HRZ has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. COMP: Compensation pin
  7. SS: Soft-start pin
  8. PG: Power good pin

Functional Features

  • Wide input voltage range for compatibility with various power sources
  • High output current capability for powering multiple components
  • Built-in protection features such as overcurrent and overtemperature protection
  • Adjustable output voltage through external resistors
  • Soft-start function for controlled startup and reduced stress on components

Advantages and Disadvantages

Advantages

  • High reliability ensures stable performance
  • Low power consumption for energy efficiency
  • Compact package size allows for space-saving designs
  • Wide input voltage range provides flexibility in power source selection

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Lack of built-in voltage regulation for multiple output voltages

Working Principles

The ISL95712HRZ works by regulating the input voltage to a desired output voltage level. It achieves this through a combination of internal circuitry and external components. The feedback pin (FB) is used to monitor the output voltage, and any deviations from the desired level are corrected by adjusting the duty cycle of the internal switching regulator.

Detailed Application Field Plans

The ISL95712HRZ can be applied in various electronic devices, including but not limited to: 1. Mobile phones 2. Tablets 3. Portable gaming consoles 4. Digital cameras 5. Portable media players

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the ISL95712HRZ include: 1. LM317: Adjustable voltage regulator with higher output current capability. 2. LT1084: Fixed voltage regulator with lower dropout voltage. 3. TPS5430: Switching voltage regulator with wider input voltage range.

These alternative models can be considered based on specific application requirements and design constraints.

Word count: 439 words

기술 솔루션에 ISL95712HRZ 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of ISL95712HRZ in technical solutions:

  1. Q: What is ISL95712HRZ? A: ISL95712HRZ is a highly integrated power management IC (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of ISL95712HRZ? A: Some key features of ISL95712HRZ include multiple voltage regulators, power sequencing, fault protection, and I2C communication interface.

  3. Q: What technical solutions can ISL95712HRZ be used in? A: ISL95712HRZ can be used in a wide range of applications such as industrial automation, medical devices, consumer electronics, and embedded systems.

  4. Q: How many voltage regulators does ISL95712HRZ have? A: ISL95712HRZ has four integrated voltage regulators, which can provide different output voltages required by the system.

  5. Q: Can ISL95712HRZ handle power sequencing? A: Yes, ISL95712HRZ supports power sequencing, allowing for controlled startup and shutdown of various power rails in the system.

  6. Q: What kind of fault protection does ISL95712HRZ offer? A: ISL95712HRZ provides overvoltage protection (OVP), undervoltage protection (UVP), and overcurrent protection (OCP) to safeguard the system from potential faults.

  7. Q: Does ISL95712HRZ support remote monitoring and control? A: Yes, ISL95712HRZ features an I2C communication interface, enabling remote monitoring and control of the PMIC's parameters.

  8. Q: What is the input voltage range supported by ISL95712HRZ? A: The input voltage range of ISL95712HRZ is typically between 2.7V and 5.5V, making it compatible with a wide range of power sources.

  9. Q: Can ISL95712HRZ operate in low-power modes? A: Yes, ISL95712HRZ supports various low-power modes, allowing for efficient power management and extending battery life in portable devices.

  10. Q: Is ISL95712HRZ a suitable choice for space-constrained designs? A: Absolutely! ISL95712HRZ comes in a compact package and offers high integration, making it ideal for space-constrained designs where board space is limited.

Please note that these answers are general and may vary depending on the specific requirements and use cases of your technical solution.