LT1317CMS8#PBF

Product Overview

Category

The LT1317CMS8#PBF belongs to the category of voltage regulators.

Use

It is used to regulate voltage in electronic circuits, ensuring a stable and consistent output voltage.

Characteristics

• Input Voltage Range: 2.5V to 15V
• Output Voltage Range: 1.24V to 14V
• Maximum Output Current: 500mA
• Low Dropout Voltage: 300mV at 500mA
• Low Quiescent Current: 75µA
• Shutdown Mode: <1µA
• Fixed Output Voltages: 1.24V, 1.5V, 1.8V, 2.5V, 3.3V, 5V, 12V

Package

The LT1317CMS8#PBF comes in an 8-pin MSOP package.

Essence

This voltage regulator is essential for maintaining stable power supply voltages in various electronic applications.

Packaging/Quantity

The LT1317CMS8#PBF is typically available in reels with a quantity of 2500 units per reel.

Specifications

• Input Voltage Range: 2.5V to 15V
• Output Voltage Range: 1.24V to 14V
• Maximum Output Current: 500mA
• Dropout Voltage: 300mV at 500mA
• Quiescent Current: 75µA
• Shutdown Mode Current: <1µA
• Fixed Output Voltages: 1.24V, 1.5V, 1.8V, 2.5V, 3.3V, 5V, 12V

Detailed Pin Configuration

1. VIN (Pin 1) - Input Voltage
2. GND (Pin 2) - Ground
3. SHDN (Pin 3) - Shutdown Control
4. VOUT (Pin 4) - Output Voltage
5. NC (Pin 5) - No Connection
6. FB (Pin 6) - Feedback
7. NC (Pin 7) - No Connection
8. NC (Pin 8) - No Connection

Functional Features

• Wide Input Voltage Range
• Low Dropout Voltage
• Low Quiescent Current
• Shutdown Mode for Power Savings
• Fixed Output Voltage Options

Advantages and Disadvantages

Advantages

• Wide input voltage range allows for versatile applications
• Low dropout voltage ensures efficient power conversion
• Low quiescent current for minimal power consumption
• Shutdown mode enables power savings when the regulator is not in use
• Fixed output voltage options provide flexibility for different circuit requirements

Disadvantages

• Limited maximum output current of 500mA may not be suitable for high-power applications
• The 8-pin MSOP package may require additional board space compared to smaller packages

Working Principles

The LT1317CMS8#PBF operates by comparing the feedback voltage to a precise internal reference, adjusting the output voltage to maintain a stable level regardless of variations in the input voltage or load conditions. When the shutdown pin is activated, the device enters a low-power state, reducing current consumption.

Detailed Application Field Plans

The LT1317CMS8#PBF is commonly used in: - Battery-powered devices - Portable electronics - Industrial control systems - Automotive applications - Distributed power systems

Detailed and Complete Alternative Models

Some alternative models to the LT1317CMS8#PBF include: - LT1763 - LM317 - ADP3338 - TPS7A47

Note: The provided alternatives are based on similar specifications and application suitability.

This comprehensive entry provides an in-depth understanding of the LT1317CMS8#PBF, covering its basic information, specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.