LT3008ETS8#TRMPBF
Product Overview
Category
LT3008ETS8#TRMPBF belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage levels in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Wide input voltage range
- Thermal shutdown protection
- Current limit protection
Package
LT3008ETS8#TRMPBF comes in an 8-pin surface mount package.
Essence
The essence of LT3008ETS8#TRMPBF is to provide a stable and regulated voltage output for various electronic devices.
Packaging/Quantity
This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V to 36V
- Output Voltage Range: 1.22V to 20V
- Dropout Voltage: 300mV at 100mA load current
- Line Regulation: ±0.02% typical
- Load Regulation: ±0.1% typical
- Quiescent Current: 40µA typical
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- VIN: Input voltage pin
- GND: Ground pin
- ADJ: Adjust pin for setting the output voltage
- NC: No connection
- NC: No connection
- NC: No connection
- VOUT: Output voltage pin
- NC: No connection
Functional Features
- High precision voltage regulation ensures accurate output voltage.
- Low dropout voltage allows operation even when input voltage is close to the desired output voltage.
- Wide input voltage range enables compatibility with various power sources.
- Thermal shutdown protection prevents damage due to excessive heat.
- Current limit protection safeguards against overcurrent conditions.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures stable performance of electronic devices.
- Low dropout voltage allows efficient power utilization.
- Wide input voltage range provides flexibility in different applications.
- Thermal shutdown and current limit protection enhance product reliability.
Disadvantages
- Limited output voltage range may not be suitable for certain applications requiring higher voltages.
- Higher quiescent current compared to some alternative models may affect power efficiency in low-power applications.
Working Principles
LT3008ETS8#TRMPBF operates based on a linear voltage regulator principle. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage despite variations in input voltage and load conditions.
Detailed Application Field Plans
LT3008ETS8#TRMPBF finds applications in various fields, including but not limited to: - Battery-powered devices - Portable electronics - Automotive systems - Industrial control systems - Communication equipment
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to LT3008ETS8#TRMPBF are: - LM317T - LM1117-3.3 - LT1086CT-3.3 - ADP3339AKCZ-3.3-R7
These models offer similar functionality and characteristics, providing options for different design requirements.
In conclusion, LT3008ETS8#TRMPBF is a voltage regulator with high precision, low dropout voltage, and wide input voltage range. It offers thermal shutdown and current limit protection for enhanced reliability. Its applications span across various industries, and there are alternative models available for different design needs.
기술 솔루션에 LT3008ETS8#TRMPBF 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of LT3008ETS8#TRMPBF in technical solutions:
Q: What is the LT3008ETS8#TRMPBF? A: The LT3008ETS8#TRMPBF is a low dropout voltage regulator designed for use in various technical applications.
Q: What is the input voltage range of the LT3008ETS8#TRMPBF? A: The input voltage range of the LT3008ETS8#TRMPBF is typically between 2.5V and 20V.
Q: What is the output voltage range of the LT3008ETS8#TRMPBF? A: The output voltage range of the LT3008ETS8#TRMPBF can be adjusted from 1.22V to 19.5V.
Q: What is the maximum output current of the LT3008ETS8#TRMPBF? A: The LT3008ETS8#TRMPBF can provide a maximum output current of up to 200mA.
Q: Is the LT3008ETS8#TRMPBF suitable for battery-powered applications? A: Yes, the LT3008ETS8#TRMPBF is well-suited for battery-powered applications due to its low dropout voltage and low quiescent current.
Q: Can the LT3008ETS8#TRMPBF handle high temperatures? A: Yes, the LT3008ETS8#TRMPBF has a wide operating temperature range of -40°C to 125°C, making it suitable for various environments.
Q: Does the LT3008ETS8#TRMPBF have built-in protection features? A: Yes, the LT3008ETS8#TRMPBF includes features like thermal shutdown and current limit protection to ensure safe operation.
Q: Can the LT3008ETS8#TRMPBF be used in automotive applications? A: Yes, the LT3008ETS8#TRMPBF is automotive qualified and can be used in automotive electronics designs.
Q: What type of package does the LT3008ETS8#TRMPBF come in? A: The LT3008ETS8#TRMPBF is available in an 8-pin surface mount package (TSOT-23).
Q: Are there any application notes or reference designs available for the LT3008ETS8#TRMPBF? A: Yes, Linear Technology (now part of Analog Devices) provides application notes and reference designs that can help with the implementation of the LT3008ETS8#TRMPBF in various technical solutions.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.