LT3008MPTS8-3.3#TRPBF

Product Overview

Category

The LT3008MPTS8-3.3#TRPBF belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

• Voltage regulation: The LT3008MPTS8-3.3#TRPBF provides a regulated output voltage of 3.3 volts.
• Package: This product comes in an LT3008MPTS8-3.3#TRPBF package.
• Essence: The essence of this voltage regulator is to maintain a stable output voltage despite fluctuations in input voltage or load conditions.
• Packaging/Quantity: The LT3008MPTS8-3.3#TRPBF is typically packaged in reels or tubes, with a quantity of several hundred units per package.

Specifications

The specifications of the LT3008MPTS8-3.3#TRPBF include:

• Input Voltage Range: 2.7V to 20V
• Output Voltage: 3.3V
• Maximum Output Current: 200mA
• Dropout Voltage: 300mV
• Quiescent Current: 45µA
• Line Regulation: ±0.02%
• Load Regulation: ±0.1%
• Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LT3008MPTS8-3.3#TRPBF has the following pin configuration:

1. VIN (Input Voltage)
2. GND (Ground)
3. VOUT (Output Voltage)

Functional Features

The LT3008MPTS8-3.3#TRPBF offers the following functional features:

• Low dropout voltage: The voltage regulator can operate with a very small difference between the input and output voltage, minimizing power dissipation.
• Low quiescent current: The LT3008MPTS8-3.3#TRPBF consumes minimal current when in standby mode, conserving energy.
• Overcurrent protection: It includes built-in protection mechanisms to prevent damage due to excessive current flow.
• Thermal shutdown: The regulator automatically shuts down if the temperature exceeds a safe operating limit, protecting the device from overheating.

Advantages and Disadvantages

Advantages

• Stable output voltage: The LT3008MPTS8-3.3#TRPBF ensures a constant output voltage even under varying input conditions.
• Compact size: The small package size makes it suitable for space-constrained applications.
• Low power consumption: The low quiescent current helps conserve power in battery-operated devices.

Disadvantages

• Limited maximum output current: The LT3008MPTS8-3.3#TRPBF can only provide a maximum output current of 200mA, which may not be sufficient for high-power applications.
• Narrow input voltage range: The input voltage range is limited to 2.7V to 20V, which may not be suitable for all applications.

Working Principles

The LT3008MPTS8-3.3#TRPBF operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This is achieved by regulating the current flow through a series pass transistor.

Detailed Application Field Plans

The LT3008MPTS8-3.3#TRPBF finds applications in various electronic systems, including:

1. Battery-powered devices: It can be used to regulate the voltage in portable electronics such as smartphones, tablets, and wearable devices.
2. Industrial automation: The voltage regulator can be employed in control systems, sensors, and actuators to ensure stable power supply.
3. Automotive electronics: It is suitable for automotive applications like infotainment systems, lighting controls, and engine management systems.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the LT3008MPTS8-3.3#TRPBF include:

1. LM1117-3.3: A popular voltage regulator with a fixed output voltage of 3.3V.
2. MCP1703-3.3: Another voltage regulator with a fixed output voltage of 3.3V, known for its low dropout voltage.
3. LDO50V33: A low-dropout voltage regulator capable of providing a regulated output voltage of 3.3V.

These alternative models can be considered based on specific application requirements and availability.

In conclusion, the LT3008MPTS8-3.3#TRPBF is a voltage regulator that provides a stable output voltage of 3.3 volts. It offers advantages such as compact size and low power consumption, but has limitations in terms of maximum output current and input voltage range. This device finds