제품 세부사항은 사양을 확인하세요.
LT3062IDCB-3.3
Product Overview
Category
LT3062IDCB-3.3 belongs to the category of voltage regulators.
Use
This product is used to regulate and stabilize voltage levels in electronic circuits.
Characteristics
- Input Voltage Range: 1.8V to 45V
- Output Voltage: 3.3V
- Maximum Output Current: 200mA
- Low Dropout Voltage: 300mV at 200mA Load
- Adjustable Output Voltage with External Resistors
- Low Noise: 40µVRMS (10Hz to 100kHz)
- Low Quiescent Current: 30µA
- Shutdown Mode: IQ < 1µA
- Thermal Limiting
- Reverse-Battery Protection
- Short-Circuit Protection
- Adjustable Soft-Start
Package
The LT3062IDCB-3.3 comes in a DFN (Dual Flat No-Lead) package.
Essence
The essence of LT3062IDCB-3.3 is its ability to provide a stable and regulated output voltage of 3.3V, even when the input voltage varies.
Packaging/Quantity
The LT3062IDCB-3.3 is typically packaged in reels or tubes and is available in quantities suitable for both small-scale and large-scale production.
Specifications
- Input Voltage Range: 1.8V to 45V
- Output Voltage: 3.3V
- Maximum Output Current: 200mA
- Dropout Voltage: 300mV at 200mA Load
- Quiescent Current: 30µA
- Noise: 40µVRMS (10Hz to 100kHz)
- Shutdown Mode Current: < 1µA
- Operating Temperature Range: -40°C to 125°C
- Package Type: DFN
Detailed Pin Configuration
The LT3062IDCB-3.3 has the following pin configuration:
- VIN: Input Voltage
- GND: Ground
- SHDN: Shutdown Control
- SET: Output Voltage Set Point
- VOUT: Regulated Output Voltage
Functional Features
1. Adjustable Output Voltage
The LT3062IDCB-3.3 allows for adjusting the output voltage using external resistors, providing flexibility in various applications.
2. Low Dropout Voltage
With a dropout voltage of only 300mV at a load current of 200mA, this voltage regulator minimizes power dissipation and improves efficiency.
3. Low Noise
The LT3062IDCB-3.3 exhibits low noise levels of 40µVRMS from 10Hz to 100kHz, making it suitable for noise-sensitive applications.
4. Thermal and Short-Circuit Protection
This voltage regulator incorporates thermal limiting and short-circuit protection mechanisms to ensure safe operation and protect the circuitry.
5. Adjustable Soft-Start
The adjustable soft-start feature prevents excessive inrush current during startup, enhancing system reliability.
Advantages and Disadvantages
Advantages
- Wide input voltage range allows compatibility with various power sources.
- Low dropout voltage minimizes power dissipation.
- Low noise output ensures signal integrity in sensitive applications.
- Thermal and short-circuit protection enhance safety and reliability.
- Adjustable soft-start prevents excessive inrush current.
Disadvantages
- Maximum output current limited to 200mA, which may not be sufficient for high-power applications.
- Requires external resistors for output voltage adjustment, adding complexity to the design.
Working Principles
The LT3062IDCB-3.3 is a linear voltage regulator that uses a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry to regulate the output voltage at the desired level. The dropout voltage is minimized by utilizing a low-dropout (LDO) architecture, ensuring efficient operation even when the input voltage is close to the output voltage.
Detailed Application Field Plans
The LT3062IDCB-3.3 finds applications in various fields, including:
- Battery-Powered Devices: Provides stable voltage for portable electronic devices, extending battery life.
- Industrial Control Systems: Regulates voltage levels in control circuits, ensuring reliable operation.
- Automotive Electronics: Stabilizes voltage for automotive sensors and modules, improving performance and reliability.
- Communication Systems: Maintains constant voltage for communication equipment, preventing signal degradation.
- Medical Devices: Provides regulated power supply for medical instruments, ensuring accurate measurements and safe operation.
Detailed and Complete Alternative Models
- LT3062IDCB-5: Output voltage of 5V, suitable for applications requiring higher voltage levels.
- LT3062IDCB-ADJ: Adjustable output voltage, allowing customization for specific requirements. 3
기술 솔루션에 LT3062IDCB-3.3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of LT3062IDCB-3.3 in technical solutions:
Q: What is the LT3062IDCB-3.3? A: The LT3062IDCB-3.3 is a low dropout (LDO) linear regulator IC that provides a fixed output voltage of 3.3V.
Q: What is the input voltage range for the LT3062IDCB-3.3? A: The input voltage range for the LT3062IDCB-3.3 is typically between 2.7V and 45V.
Q: What is the maximum output current of the LT3062IDCB-3.3? A: The LT3062IDCB-3.3 can provide a maximum output current of 200mA.
Q: Can the LT3062IDCB-3.3 be used in battery-powered applications? A: Yes, the LT3062IDCB-3.3 can be used in battery-powered applications as it has a low quiescent current and operates with a wide input voltage range.
Q: Is the LT3062IDCB-3.3 suitable for noise-sensitive applications? A: Yes, the LT3062IDCB-3.3 has excellent line and load transient response, making it suitable for noise-sensitive applications.
Q: Does the LT3062IDCB-3.3 require any external components for operation? A: Yes, the LT3062IDCB-3.3 requires a few external components such as input and output capacitors for stability and filtering.
Q: Can the LT3062IDCB-3.3 handle short-circuit conditions? A: Yes, the LT3062IDCB-3.3 has built-in current limit and thermal shutdown protection, which allows it to handle short-circuit conditions.
Q: What is the typical dropout voltage of the LT3062IDCB-3.3? A: The typical dropout voltage of the LT3062IDCB-3.3 is very low, typically around 300mV at full load.
Q: Can the LT3062IDCB-3.3 be used in automotive applications? A: Yes, the LT3062IDCB-3.3 is designed to operate in automotive environments and meets the necessary specifications for such applications.
Q: Are there any specific precautions to consider when using the LT3062IDCB-3.3? A: It is important to follow the manufacturer's datasheet and application notes for proper usage and layout considerations to ensure optimal performance of the LT3062IDCB-3.3.