The LT3090MPMSE#TRPBF belongs to the category of voltage regulators.
This product is primarily used for regulating voltage in electronic circuits.
The LT3090MPMSE#TRPBF comes in a small surface-mount package.
The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.
The LT3090MPMSE#TRPBF is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.
The LT3090MPMSE#TRPBF has the following pin configuration:
The LT3090MPMSE#TRPBF operates based on a linear regulator architecture. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The device utilizes a pass transistor to regulate the voltage by dissipating excess energy as heat.
The LT3090MPMSE#TRPBF finds applications in various fields, including:
These alternative models offer similar functionality and can be considered as substitutes for the LT3090MPMSE#TRPBF in specific applications.
In conclusion, the LT3090MPMSE#TRPBF is a voltage regulator that provides precise and adjustable voltage regulation. With its wide input voltage range, current limiting, and thermal shutdown protection, it offers versatility and reliability in various electronic applications.
Sure! Here are 10 common questions and answers related to the application of LT3090MPMSE#TRPBF in technical solutions:
Q: What is the LT3090MPMSE#TRPBF? A: The LT3090MPMSE#TRPBF is a high current, low dropout voltage linear regulator designed for use in various technical applications.
Q: What is the maximum output current of the LT3090MPMSE#TRPBF? A: The LT3090MPMSE#TRPBF can provide a maximum output current of up to 1.5A.
Q: What is the dropout voltage of the LT3090MPMSE#TRPBF? A: The dropout voltage of the LT3090MPMSE#TRPBF is typically around 400mV at full load.
Q: Can the LT3090MPMSE#TRPBF be used in battery-powered applications? A: Yes, the LT3090MPMSE#TRPBF is suitable for battery-powered applications due to its low dropout voltage and low quiescent current.
Q: What is the input voltage range of the LT3090MPMSE#TRPBF? A: The LT3090MPMSE#TRPBF can accept an input voltage range from 1.2V to 40V.
Q: Is the LT3090MPMSE#TRPBF thermally protected? A: Yes, the LT3090MPMSE#TRPBF has built-in thermal shutdown protection to prevent overheating.
Q: Can the LT3090MPMSE#TRPBF be used in both fixed and adjustable output voltage configurations? A: Yes, the LT3090MPMSE#TRPBF can be used in both fixed and adjustable output voltage configurations.
Q: What is the typical quiescent current of the LT3090MPMSE#TRPBF? A: The typical quiescent current of the LT3090MPMSE#TRPBF is around 1.5mA.
Q: Does the LT3090MPMSE#TRPBF require any external components for operation? A: Yes, the LT3090MPMSE#TRPBF requires a few external components such as input and output capacitors for stability.
Q: What are some common applications of the LT3090MPMSE#TRPBF? A: The LT3090MPMSE#TRPBF is commonly used in applications such as power supplies, industrial control systems, automotive electronics, and audio amplifiers.
Please note that these answers are general and may vary depending on specific design considerations and requirements.