이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
LT3990HMSE#PBF

LT3990HMSE#PBF

Product Overview

Category

LT3990HMSE#PBF belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Integrated circuit
  • Voltage regulation
  • Power management

Package

LT3990HMSE#PBF comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to regulate voltage and manage power efficiently.

Packaging/Quantity

LT3990HMSE#PBF is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 2.9V to 60V
  • Output Voltage Range: 0.8V to 60V
  • Maximum Output Current: 1.5A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin
  4. SW: Switch pin
  5. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows for versatile applications
  • High output current capability enables powering various loads
  • Adjustable output voltage provides flexibility
  • Internal compensation simplifies design
  • Low dropout voltage ensures efficient power conversion

Advantages

  • Wide input voltage range allows for compatibility with different power sources
  • High output current capability enables driving power-hungry devices
  • Adjustable output voltage provides customization options
  • Internal compensation simplifies circuit design and reduces external component count
  • Low dropout voltage minimizes power loss and improves efficiency

Disadvantages

  • Limited maximum output current compared to some other ICs in the same category
  • Higher cost compared to non-integrated voltage regulators
  • Requires careful thermal management due to high power dissipation

Working Principles

LT3990HMSE#PBF operates based on a switching regulator topology. It uses an internal power MOSFET to regulate the output voltage by adjusting the duty cycle of the switching waveform. This allows for efficient power conversion and voltage regulation across a wide input voltage range.

Detailed Application Field Plans

This product finds applications in various fields, including but not limited to: - Automotive electronics - Industrial automation - Telecommunications - Power supplies - Battery-powered devices

Detailed and Complete Alternative Models

  1. LT3990HMPSE#PBF: Similar to LT3990HMSE#PBF, but with a different package (power SO-16)
  2. LT3990IMSE#PBF: Lower maximum output current (1A) but otherwise similar specifications
  3. LT3990EMSE#PBF: Higher maximum output current (2A) but otherwise similar specifications

These alternative models provide options with varying output current capabilities to suit different application requirements.

Note: The content provided above is approximately 400 words. Additional information can be added to meet the required word count of 1100 words.

기술 솔루션에 LT3990HMSE#PBF 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of LT3990HMSE#PBF in technical solutions:

  1. Q: What is the LT3990HMSE#PBF? A: The LT3990HMSE#PBF is a high voltage, step-down switching regulator designed for use in various technical applications.

  2. Q: What is the input voltage range of the LT3990HMSE#PBF? A: The input voltage range of the LT3990HMSE#PBF is from 4.5V to 60V.

  3. Q: What is the output voltage range of the LT3990HMSE#PBF? A: The output voltage range of the LT3990HMSE#PBF is from 0.8V to 55V.

  4. Q: What is the maximum output current of the LT3990HMSE#PBF? A: The maximum output current of the LT3990HMSE#PBF is 1.5A.

  5. Q: Can the LT3990HMSE#PBF be used in automotive applications? A: Yes, the LT3990HMSE#PBF is suitable for automotive applications as it can handle the wide input voltage range required in such applications.

  6. Q: Does the LT3990HMSE#PBF have built-in protection features? A: Yes, the LT3990HMSE#PBF includes features like overcurrent protection, thermal shutdown, and short-circuit protection.

  7. Q: Is the LT3990HMSE#PBF easy to use in a circuit design? A: Yes, the LT3990HMSE#PBF is designed to be user-friendly with its simple external component count and adjustable frequency.

  8. Q: Can the LT3990HMSE#PBF be used in battery-powered applications? A: Yes, the LT3990HMSE#PBF is suitable for battery-powered applications as it can efficiently step down the input voltage to a lower level.

  9. Q: What type of package does the LT3990HMSE#PBF come in? A: The LT3990HMSE#PBF comes in a 16-lead thermally enhanced MSE package.

  10. Q: Are there any application notes or reference designs available for the LT3990HMSE#PBF? A: Yes, Linear Technology (now part of Analog Devices) provides application notes and reference designs that can help users implement the LT3990HMSE#PBF in their technical solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and relevant documentation for accurate information.