LT8361EMSE#TRPBF

Product Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Wide Input Voltage Range, Synchronous Rectification
• Package: MSOP-16E
• Essence: Step-Down DC/DC Converter
• Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

• Input Voltage Range: 2.8V to 60V
• Output Voltage Range: 1.5V to 24V
• Switching Frequency: Up to 2MHz
• Maximum Output Current: 2A
• Efficiency: Up to 95%
• Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LT8361EMSE#TRPBF has a total of 16 pins arranged as follows:

1. VIN: Input Voltage
2. GND: Ground
3. SW: Switch Node
4. FB: Feedback Pin
5. VCC: IC Supply Voltage
6. SYNC/MODE: Synchronization/MODE Selection
7. SS/TR/UVLO: Soft-Start/Tracking/Undervoltage Lockout
8. RT: Timing Resistor
9. CT: Timing Capacitor
10. PGND: Power Ground
11. COMP: Compensation Node
12. ITH: Current Sense Threshold
13. BST: Bootstrap Capacitor
14. LX: Inductor Connection
15. VOUT: Output Voltage
16. NC: No Connect

Functional Features

• Wide input voltage range allows for versatile applications.
• High efficiency ensures minimal power loss during conversion.
• Synchronous rectification improves overall performance.
• Adjustable output voltage provides flexibility in design.
• Soft-start and tracking features for controlled startup.
• Undervoltage lockout protects against low input voltage conditions.

Advantages and Disadvantages

Advantages

• High efficiency results in reduced power consumption.
• Wide input voltage range accommodates various power sources.
• Synchronous rectification improves overall performance.
• Adjustable output voltage allows for customization.
• Soft-start and tracking features ensure controlled startup.

Disadvantages

• Limited maximum output current of 2A.
• Requires external timing resistor and capacitor for operation.
• Not suitable for high-power applications.

Working Principles

The LT8361EMSE#TRPBF is a step-down DC/DC converter that efficiently converts a higher input voltage to a lower output voltage. It utilizes a synchronous rectification topology to minimize power loss during conversion. The IC regulates the output voltage by adjusting the duty cycle of the internal switch, which controls the energy transfer from the input to the output.

Detailed Application Field Plans

The LT8361EMSE#TRPBF is commonly used in various applications, including:

1. Battery-powered devices: Provides efficient power management for portable electronics.
2. Automotive systems: Enables voltage regulation in automotive electronics.
3. Industrial equipment: Suitable for powering control systems and sensors.
4. LED lighting: Used for driving LED lights with adjustable brightness.
5. Telecom infrastructure: Provides power conversion for telecom equipment.

Detailed and Complete Alternative Models

1. LT8610EMSE#TRPBF: Similar specifications with higher maximum output current of 3A.
2. LT8609EMSE#TRPBF: Lower maximum output current of 1.5A but with wider input voltage range.
3. LT8362EMSE#TRPBF: Higher maximum output current of 4A with similar input voltage range.

(Note: This list is not exhaustive and other alternative models may exist.)

This concludes the encyclopedia entry for LT8361EMSE#TRPBF, providing an overview of its product details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.