이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
LTC3255IMSE#TRPBF

LTC3255IMSE#TRPBF

Product Overview

  • Category: Voltage Regulator
  • Use: Power management for portable devices
  • Characteristics: Low noise, high efficiency, small package size
  • Package: MSOP-16
  • Essence: Provides regulated output voltage from a single Li-Ion cell or USB input
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.8V to 5.25V
  • Quiescent Current: 20μA
  • Maximum Output Current: 50mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. SW: Switch Node
  4. FB: Feedback Voltage
  5. EN: Enable Pin
  6. VOUT: Output Voltage
  7. SS/TRK: Soft-Start/Tracking
  8. PG: Power Good Indicator

Functional Features

  • Low Noise: Ensures clean power supply for sensitive components
  • High Efficiency: Minimizes power loss and extends battery life
  • Soft-Start/Tracking: Allows gradual startup and output voltage tracking
  • Power Good Indicator: Monitors output voltage status

Advantages

  • Small Package Size: Ideal for space-constrained applications
  • Wide Input Voltage Range: Versatile compatibility with various power sources
  • Low Quiescent Current: Minimizes power consumption in standby mode

Disadvantages

  • Limited Maximum Output Current: Not suitable for high-power applications
  • Restricted Operating Temperature Range: Unsuitable for extreme temperature environments

Working Principles

The LTC3255IMSE#TRPBF regulates the input voltage to provide a stable output voltage using a buck-boost topology. It employs a feedback loop to adjust the duty cycle of the internal switch, ensuring the output voltage remains constant despite fluctuations in the input voltage.

Detailed Application Field Plans

  1. Portable Electronics: Extends battery life and ensures stable power supply for smartphones, tablets, and wearables.
  2. IoT Devices: Enables efficient power management for connected sensors and devices with varying power sources.
  3. Consumer Electronics: Provides regulated power for audio devices, cameras, and other portable gadgets.

Detailed and Complete Alternative Models

  1. LT3652IMSE#PBF: Similar functionality with higher maximum output current
  2. LTC3115-1IMS#PBF: Buck-boost regulator with wider input voltage range

Note: The alternative models listed above are not exhaustive and may require further evaluation based on specific application requirements.

This comprehensive entry provides an in-depth understanding of the LTC3255IMSE#TRPBF, covering its specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models.

기술 솔루션에 LTC3255IMSE#TRPBF 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the input voltage range of LTC3255IMSE#TRPBF?

    • The input voltage range of LTC3255IMSE#TRPBF is 1.8V to 5.5V.
  2. What are the typical applications of LTC3255IMSE#TRPBF?

    • LTC3255IMSE#TRPBF is commonly used in battery-powered systems, energy harvesting applications, and low power sensor nodes.
  3. What is the output voltage range of LTC3255IMSE#TRPBF?

    • The output voltage range of LTC3255IMSE#TRPBF is adjustable from 1.8V to 5.25V.
  4. What is the maximum output current of LTC3255IMSE#TRPBF?

    • LTC3255IMSE#TRPBF can provide a maximum output current of 50mA.
  5. What are the key features of LTC3255IMSE#TRPBF?

    • Some key features of LTC3255IMSE#TRPBF include low quiescent current, integrated boost converter, and low dropout linear regulator.
  6. How does LTC3255IMSE#TRPBF help in energy harvesting applications?

    • LTC3255IMSE#TRPBF efficiently converts low input voltages from energy harvesting sources into usable higher voltages for powering sensors and wireless transmitters.
  7. Can LTC3255IMSE#TRPBF operate from a single-cell battery?

    • Yes, LTC3255IMSE#TRPBF can operate from a single-cell battery due to its wide input voltage range.
  8. What are the protection features of LTC3255IMSE#TRPBF?

    • LTC3255IMSE#TRPBF includes overcurrent protection, thermal shutdown, and reverse battery protection.
  9. Is LTC3255IMSE#TRPBF suitable for portable medical devices?

    • Yes, LTC3255IMSE#TRPBF is suitable for portable medical devices due to its low power consumption and small footprint.
  10. Can LTC3255IMSE#TRPBF be used in IoT devices?

    • Yes, LTC3255IMSE#TRPBF is suitable for IoT devices as it can efficiently manage power from energy harvesting sources and extend battery life.

Please let me know if you need further information on any of these questions!