LTC3610EWP

Product Overview

Category: Integrated Circuit (IC)
Use: Power Management
Characteristics:
- High efficiency voltage regulator
- Wide input voltage range
- Low quiescent current
- Small package size
Package: WQFN-20
Essence: Voltage Regulator IC
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

Input Voltage Range: 2.25V to 5.5V
Output Voltage Range: 0.6V to VIN
Maximum Output Current: 1A
Quiescent Current: 30µA
Switching Frequency: 1MHz
Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LTC3610EWP has a total of 20 pins. The pin configuration is as follows:

VOUT
GND
SW
SW
FB
EN
SS
PGND
PGND
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VIN

Functional Features

High efficiency synchronous buck regulator
Adjustable output voltage
Soft-start and tracking capability
Overcurrent protection
Thermal shutdown protection
Short-circuit protection

Advantages and Disadvantages

Advantages: - High efficiency operation - Wide input voltage range - Low quiescent current - Compact package size

Disadvantages: - Limited maximum output current (1A)

Working Principles

The LTC3610EWP is a synchronous buck regulator that converts a higher input voltage to a lower output voltage. It utilizes high-frequency switching to efficiently regulate the output voltage. The device incorporates a feedback loop to maintain the desired output voltage and provides various protection features to ensure safe operation.

Detailed Application Field Plans

The LTC3610EWP is commonly used in various applications, including but not limited to: - Portable electronic devices - Battery-powered systems - Industrial equipment - Automotive electronics - Distributed power systems

Detailed and Complete Alternative Models

LTC3610EUFP
LTC3610HMP
LTC3610EMSE
LTC3610EFE
LTC3610IMS8E
LTC3610EDD
LTC3610EUF
LTC3610ES6
LTC3610EDDB
LTC3610EUFD
LTC3610ES6#TRPBF
LTC3610EDDB#TRPBF
LTC3610EUFD#TRPBF

These alternative models offer similar functionality and characteristics to the LTC3610EWP, providing flexibility for different design requirements.

Note: The above information is subject to change. Please refer to the official datasheet for the most accurate and up-to-date specifications.

기술 솔루션에 LTC3610EWP 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of LTC3610EWP in technical solutions:

Q: What is LTC3610EWP? A: LTC3610EWP is a high-efficiency, synchronous buck-boost DC/DC converter IC.
Q: What is the input voltage range of LTC3610EWP? A: The input voltage range of LTC3610EWP is typically from 2.7V to 5.5V.
Q: What is the output voltage range of LTC3610EWP? A: The output voltage range of LTC3610EWP can be adjusted from 2.5V to 5.25V.
Q: What is the maximum output current of LTC3610EWP? A: The maximum output current of LTC3610EWP is typically 1A.
Q: Can LTC3610EWP operate in both buck and boost modes? A: Yes, LTC3610EWP can operate in both buck and boost modes, allowing it to step up or step down the input voltage.
Q: What is the efficiency of LTC3610EWP? A: The efficiency of LTC3610EWP can reach up to 95% under certain operating conditions.
Q: Does LTC3610EWP have built-in protection features? A: Yes, LTC3610EWP has built-in protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.
Q: Can LTC3610EWP be used in battery-powered applications? A: Yes, LTC3610EWP is suitable for battery-powered applications due to its wide input voltage range and high efficiency.
Q: What type of package does LTC3610EWP come in? A: LTC3610EWP is available in a 20-pin exposed pad TSSOP package.
Q: What are some typical applications of LTC3610EWP? A: Some typical applications of LTC3610EWP include portable devices, battery-powered systems, industrial equipment, and automotive electronics.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.