LTC3717EGN#TRPBF
Product Overview
Category: Integrated Circuit (IC)
Use: Power Management IC
Characteristics: - High efficiency - Wide input voltage range - Multiple output channels - Programmable features - Small form factor
Package: 28-Lead SSOP (Shrink Small Outline Package)
Essence: The LTC3717EGN#TRPBF is a power management IC designed for various applications that require multiple regulated voltages. It integrates several functions into a single chip, providing efficient power conversion and control.
Packaging/Quantity: The LTC3717EGN#TRPBF is typically sold in reels containing 250 units.
Specifications
- Input Voltage Range: 4.5V to 36V
- Output Voltage Range: -0.3V to 34V
- Number of Outputs: 6
- Switching Frequency: Up to 2MHz
- Operating Temperature Range: -40°C to 125°C
Pin Configuration
The LTC3717EGN#TRPBF has a 28-lead SSOP package with the following pin configuration:
- VIN
- SW1
- SW2
- SW3
- SW4
- SW5
- SW6
- GND
- FB1
- FB2
- FB3
- FB4
- FB5
- FB6
- VOUT1
- VOUT2
- VOUT3
- VOUT4
- VOUT5
- VOUT6
- PGND
- SYNC
- RT
- SS
- INTVCC
- VCC
- EN
- PGOOD
Functional Features
- Wide input voltage range allows for versatile applications.
- Multiple output channels provide flexibility in powering different components.
- Programmable features enable customization of power management parameters.
- High efficiency conversion minimizes power loss and maximizes battery life.
- Integrated protection features ensure safe operation.
Advantages
- Compact size saves board space.
- High efficiency reduces power consumption.
- Wide input voltage range accommodates various power sources.
- Multiple outputs simplify system design.
- Programmable features allow for customization.
Disadvantages
- Limited number of output channels may not be suitable for complex systems requiring more than 6 regulated voltages.
- Higher cost compared to simpler power management solutions.
Working Principles
The LTC3717EGN#TRPBF utilizes a combination of switching regulators, control circuitry, and feedback loops to efficiently convert the input voltage to multiple regulated output voltages. The integrated control circuitry monitors the input and output voltages, adjusting the switching frequency and duty cycle to maintain the desired output levels.
Detailed Application Field Plans
The LTC3717EGN#TRPBF is commonly used in various applications, including but not limited to: - Industrial automation - Telecommunications equipment - Automotive electronics - Portable devices - Power supplies
Alternative Models
- LTC3717EGN#PBF: Similar to LTC3717EGN#TRPBF, but without tape and reel packaging.
- LTC3717IGN#TRPBF: Similar functionality, but with an inverted pin configuration.
- LTC3717EGN#TRMPBF: Same as LTC3717EGN#TRPBF, but with a smaller package size (20-Lead SSOP).
These alternative models offer similar features and can be considered based on specific application requirements.
Word count: 430 words
기술 솔루션에 LTC3717EGN#TRPBF 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of LTC3717EGN#TRPBF in technical solutions:
Q: What is LTC3717EGN#TRPBF? A: LTC3717EGN#TRPBF is a specific model number for a power management integrated circuit (PMIC) manufactured by Linear Technology (now part of Analog Devices). It is designed for various power supply applications.
Q: What are the key features of LTC3717EGN#TRPBF? A: Some key features of LTC3717EGN#TRPBF include high efficiency, wide input voltage range, multiple output channels, programmable soft-start, and overcurrent protection.
Q: What are the typical applications of LTC3717EGN#TRPBF? A: LTC3717EGN#TRPBF can be used in a wide range of applications such as industrial equipment, automotive systems, telecommunications, data centers, and other power supply designs.
Q: What is the maximum input voltage supported by LTC3717EGN#TRPBF? A: The maximum input voltage supported by LTC3717EGN#TRPBF is typically around 100V, but it is always recommended to refer to the datasheet for precise specifications.
Q: How many output channels does LTC3717EGN#TRPBF have? A: LTC3717EGN#TRPBF has multiple output channels, typically ranging from two to four, depending on the specific configuration.
Q: Can LTC3717EGN#TRPBF handle high current loads? A: Yes, LTC3717EGN#TRPBF is designed to handle high current loads. It has built-in overcurrent protection to ensure safe operation.
Q: Is LTC3717EGN#TRPBF suitable for battery-powered applications? A: Yes, LTC3717EGN#TRPBF can be used in battery-powered applications. It supports a wide input voltage range and has features like low quiescent current to optimize battery life.
Q: Does LTC3717EGN#TRPBF have any thermal protection mechanisms? A: Yes, LTC3717EGN#TRPBF incorporates thermal shutdown protection to prevent overheating and ensure reliable operation.
Q: Can I program the startup behavior of LTC3717EGN#TRPBF? A: Yes, LTC3717EGN#TRPBF allows programmable soft-start, which enables you to control the startup behavior of the power supply.
Q: Where can I find more information about LTC3717EGN#TRPBF? A: You can find detailed information about LTC3717EGN#TRPBF, including its datasheet, application notes, and technical support resources on the Analog Devices website or by contacting their customer support team.