Littelfuse Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
1.5KE510CA-B
자세히보기 데이터시트

1.5KE510CA-B

Product Overview

The 1.5KE510CA-B belongs to the category of transient voltage suppressor diodes (TVS diodes). These diodes are used to protect sensitive electronic components from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events. The 1.5KE510CA-B is designed to provide robust overvoltage protection for a wide range of applications.

Basic Information

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage transients
  • Characteristics: High surge capability, fast response time, low clamping voltage
  • Package: Axial leaded, DO-201 package
  • Essence: Safeguarding electronic circuits from voltage spikes
  • Packaging/Quantity: Typically available in reels or bulk packaging

Specifications

  • Peak Power Dissipation: 1500W
  • Breakdown Voltage: 510V
  • Maximum Clamping Voltage: 827V
  • Operating Temperature Range: -55°C to +175°C
  • Storage Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The 1.5KE510CA-B TVS diode has an axial leaded package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Fast response time to transient voltage events
  • Low clamping voltage to protect downstream components
  • High surge capability for reliable overvoltage protection

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Robust surge capability
  • Wide operating temperature range

Disadvantages

  • Relatively larger package size compared to surface mount TVS diodes
  • Higher cost compared to standard diodes

Working Principles

When a transient voltage event occurs, the 1.5KE510CA-B TVS diode conducts and clamps the voltage to a safe level, diverting the excess energy away from the protected circuit. This rapid response helps prevent damage to sensitive components.

Detailed Application Field Plans

The 1.5KE510CA-B is commonly used in various applications including: - Power supplies - Telecommunication equipment - Industrial control systems - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the 1.5KE510CA-B include: - P6KE510CA - SA15CA - 1.5SMC510CA

In conclusion, the 1.5KE510CA-B transient voltage suppressor diode offers robust overvoltage protection with its high surge capability, fast response time, and low clamping voltage. While it may have some limitations such as package size and cost, its effectiveness in safeguarding electronic circuits makes it a valuable component in various applications.

[Word count: 411]

기술 솔루션에 1.5KE510CA-B 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure, here are 10 common questions and answers related to the application of 1.5KE510CA-B in technical solutions:

  1. What is the voltage rating of 1.5KE510CA-B?

    • The voltage rating of 1.5KE510CA-B is 510 volts.

  2. What is the peak pulse power of 1.5KE510CA-B?

    • The peak pulse power of 1.5KE510CA-B is 1500 watts.

  3. What is the typical application of 1.5KE510CA-B?

    • 1.5KE510CA-B is commonly used for transient voltage suppression in electronic circuits, such as in power supplies, industrial equipment, and automotive systems.

  4. What is the breakdown voltage of 1.5KE510CA-B?

    • The breakdown voltage of 1.5KE510CA-B is 570 volts minimum.

  5. How does 1.5KE510CA-B protect electronic circuits?

    • 1.5KE510CA-B provides protection by clamping transient overvoltage events to a safe level, thereby safeguarding sensitive components from damage.

  6. Can 1.5KE510CA-B be used in high-speed data lines?

    • Yes, 1.5KE510CA-B can be used in high-speed data lines to protect against voltage transients and surges.

  7. What is the response time of 1.5KE510CA-B?

    • The response time of 1.5KE510CA-B is very fast, typically responding within nanoseconds to transient voltage spikes.

  8. Is 1.5KE510CA-B suitable for use in harsh environments?

    • Yes, 1.5KE510CA-B is designed to withstand harsh environmental conditions and is suitable for use in rugged applications.

  9. Does 1.5KE510CA-B require heat sinking?

    • Depending on the application and power dissipation, heat sinking may be required for optimal performance of 1.5KE510CA-B.

  10. What are the industry standards compliance for 1.5KE510CA-B?

    • 1.5KE510CA-B complies with industry standards such as IEC 61000-4-5 for surge immunity, making it suitable for a wide range of technical solutions.

I hope these questions and answers provide the information you were looking for! If you have any more specific questions, feel free to ask.