Littelfuse Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
15KPA260C-B
자세히보기 데이터시트

15KPA260C-B Product Overview

Introduction

The 15KPA260C-B is a high-performance transient voltage suppressor (TVS) diode designed to protect electronic circuits from overvoltage transients. This entry provides a comprehensive overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Components
  • Use: Overvoltage Protection in Electronic Circuits
  • Characteristics: High Surge Capability, Low Clamping Voltage, Fast Response Time
  • Package: DO-201AD (DO-27)
  • Essence: Transient Voltage Suppression
  • Packaging/Quantity: Tape & Reel, 500 units per reel

Specifications

  • Peak Pulse Power: 15,000 Watts
  • Standoff Voltage: 260V
  • Breakdown Voltage: 289V to 321V
  • Maximum Clamping Voltage: 418V at 100A
  • Operating Temperature Range: -55°C to +175°C
  • Storage Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The 15KPA260C-B TVS diode has a standard DO-201AD package with two leads. The anode and cathode terminals are clearly marked for easy identification.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient overvoltages to protect downstream components.
  • High Surge Capability: Capable of handling large surge currents without degradation.
  • Fast Response Time: Rapidly responds to overvoltage events to minimize damage to sensitive electronics.

Advantages and Disadvantages

Advantages

  • High surge capability ensures robust protection.
  • Low clamping voltage limits stress on protected circuits.
  • Fast response time guards against rapid voltage spikes.

Disadvantages

  • May require additional circuitry for comprehensive overvoltage protection in complex systems.
  • Sensitive to reverse polarity connection, necessitating careful installation.

Working Principles

The 15KPA260C-B operates by diverting excessive transient voltages away from sensitive electronic components, thereby safeguarding them from potential damage. When a transient overvoltage occurs, the TVS diode rapidly conducts, shunting the excess energy to ground and limiting the voltage across the protected circuit.

Detailed Application Field Plans

The 15KPA260C-B is widely used in various applications, including: - Power Supplies - Industrial Equipment - Automotive Electronics - Telecommunications Systems - Consumer Electronics

Detailed and Complete Alternative Models

  • 15KPA Series: Includes various voltage options for different application requirements.
  • P6KE Series: Offers similar TVS diodes with varying power ratings and breakdown voltages.
  • 1.5KE Series: Provides alternatives with differing package styles and electrical characteristics.

In conclusion, the 15KPA260C-B TVS diode is a reliable and efficient solution for protecting electronic circuits from transient overvoltages. Its high surge capability, low clamping voltage, and fast response time make it suitable for a wide range of applications, ensuring the integrity and longevity of sensitive electronic systems.

Word Count: 498

기술 솔루션에 15KPA260C-B 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the 15KPA260C-B component used for in technical solutions?

    • The 15KPA260C-B is a high-power transient voltage suppressor diode designed to protect sensitive electronics from voltage spikes and surges.

  2. What are the key specifications of the 15KPA260C-B?

    • The 15KPA260C-B has a peak pulse power of 15000W, a breakdown voltage of 260V, and is designed for use in applications where high surge capability is required.

  3. How does the 15KPA260C-B protect electronic circuits?

    • The 15KPA260C-B clamps transient overvoltages to a safe level, preventing damage to downstream components by diverting excess current away from the protected circuit.

  4. In what type of technical solutions is the 15KPA260C-B commonly used?

    • The 15KPA260C-B is often employed in power supplies, industrial equipment, automotive electronics, and telecommunications systems to safeguard against voltage transients.

  5. What are the mounting options available for the 15KPA260C-B?

    • The 15KPA260C-B is available in both through-hole and surface mount packages, providing flexibility for different PCB layouts and assembly processes.

  6. Can the 15KPA260C-B be used in harsh environmental conditions?

    • Yes, the 15KPA260C-B is designed to withstand harsh operating environments, making it suitable for applications in rugged industrial and automotive settings.

  7. What are the temperature considerations for the 15KPA260C-B?

    • The 15KPA260C-B has a wide operating temperature range, typically from -55°C to 175°C, ensuring reliable performance across various thermal conditions.

  8. Does the 15KPA260C-B require additional heat sinking?

    • Depending on the application and power dissipation requirements, the 15KPA260C-B may benefit from additional heat sinking to maintain optimal operating temperatures.

  9. Are there any recommended layout guidelines for integrating the 15KPA260C-B into a circuit?

    • Yes, following recommended layout guidelines, such as minimizing trace lengths and providing adequate clearance, can optimize the performance of the 15KPA260C-B in a circuit.

  10. What are the industry standards or certifications applicable to the 15KPA260C-B?

    • The 15KPA260C-B complies with industry standards such as RoHS and may also have additional certifications based on specific application requirements.