Littelfuse Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
15KPA28CA-HRA

15KPA28CA-HRA Product Overview

Introduction

The 15KPA28CA-HRA is a high-reliability avalanche diode designed for use in various electronic applications. This entry provides an in-depth overview of the product, including its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Components
  • Use: Surge Protection
  • Characteristics: High reliability, fast response time, low clamping voltage
  • Package: Axial Lead
  • Essence: Provides surge protection by clamping excessive voltage levels
  • Packaging/Quantity: Available in reels or bulk packaging, quantity varies based on supplier

Specifications

  • Peak Pulse Power: 15000 W
  • Standoff Voltage: 28 V
  • Breakdown Voltage: 31.1 V to 34.4 V
  • Maximum Clamping Voltage: 45.4 V at 23.1 A
  • Operating Temperature Range: -55°C to +175°C
  • Storage Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The 15KPA28CA-HRA features an axial lead package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Avalanche Breakdown: Provides rapid response to transient voltage spikes
  • Low Clamping Voltage: Ensures protection of sensitive electronic components
  • High Reliability: Suitable for critical applications requiring dependable surge protection

Advantages and Disadvantages

Advantages

  • High reliability for critical applications
  • Fast response time to transient voltage spikes
  • Low clamping voltage protects sensitive electronics

Disadvantages

  • Higher cost compared to standard diodes
  • Requires careful handling due to sensitivity to electrostatic discharge

Working Principles

The 15KPA28CA-HRA operates based on the principle of avalanche breakdown, where it rapidly conducts excess voltage to protect downstream electronic components. When a transient voltage spike occurs, the diode enters the avalanche breakdown state, diverting the excessive energy away from the protected circuit.

Detailed Application Field Plans

The 15KPA28CA-HRA is suitable for a wide range of applications, including: - Power Supplies - Telecommunication Equipment - Industrial Control Systems - Automotive Electronics - Medical Devices

Detailed and Complete Alternative Models

  • 15KPA Series: Includes various voltage options for different application requirements
  • P6KE Series: Offers similar surge protection capabilities with different form factors
  • 5KP Series: Provides alternatives with varying power ratings and standoff voltages

In conclusion, the 15KPA28CA-HRA is a high-reliability avalanche diode that offers robust surge protection for a diverse range of electronic applications. Its fast response time, low clamping voltage, and high reliability make it a preferred choice for critical systems requiring dependable surge protection.

[Word Count: 497]

기술 솔루션에 15KPA28CA-HRA 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the application of 15KPA28CA-HRA in technical solutions?

    • The 15KPA28CA-HRA is commonly used as a transient voltage suppressor in various technical solutions to protect sensitive electronic components from voltage spikes and transients.

  2. How does the 15KPA28CA-HRA protect electronic components?

    • This component clamps the voltage during transient events, diverting excess current away from sensitive components and preventing damage due to overvoltage conditions.

  3. What are the typical operating parameters for the 15KPA28CA-HRA?

    • The 15KPA28CA-HRA typically operates at a maximum peak pulse power of 15000W with a clamping voltage of 45.4V at 100A.

  4. In what types of technical solutions is the 15KPA28CA-HRA commonly used?

    • It is commonly used in power supplies, industrial equipment, automotive electronics, and telecommunications systems to protect against voltage surges and transients.

  5. What are the key features of the 15KPA28CA-HRA that make it suitable for technical solutions?

    • Its high surge capability, low clamping voltage, and fast response time make it an ideal choice for protecting sensitive electronic circuits.

  6. Can the 15KPA28CA-HRA be used in high-temperature environments?

    • Yes, this component is designed to operate at high temperatures, making it suitable for use in harsh environmental conditions.

  7. Are there any specific mounting or handling considerations for the 15KPA28CA-HRA?

    • It is important to follow proper handling procedures and ensure secure mounting to dissipate heat effectively and maintain electrical connections.

  8. What standards or certifications does the 15KPA28CA-HRA comply with?

    • This component may comply with industry standards such as RoHS and may have undergone testing for reliability and performance.

  9. What are the recommended storage and shelf life considerations for the 15KPA28CA-HRA?

    • It is recommended to store the component in a cool, dry environment and adhere to the specified shelf life to ensure optimal performance.

  10. Where can I find detailed technical specifications and application notes for the 15KPA28CA-HRA?

    • Detailed technical specifications and application notes can typically be found in the component's datasheet provided by the manufacturer or distributor.