Littelfuse Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
5KP26C
자세히보기 데이터시트

5KP26C Product Overview

Introduction

The 5KP26C belongs to the category of transient voltage suppressor (TVS) diodes. These diodes are widely used in electronic circuits to protect sensitive components from voltage spikes and transients. The 5KP26C is specifically designed to provide robust protection against transient overvoltage conditions.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protection against voltage spikes and transients in electronic circuits
  • Characteristics: High surge capability, low clamping voltage, fast response time
  • Package: Axial leaded, DO-201AD
  • Essence: Safeguarding sensitive electronic components from voltage surges
  • Packaging/Quantity: Available in reels or bulk packaging, quantity varies by supplier

Specifications

  • Peak Power Dissipation: 5000W
  • Breakdown Voltage Range: 23.2V to 28.9V
  • Operating Temperature Range: -55°C to +175°C
  • Storage Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The 5KP26C TVS diode has an axial leaded package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Transient Voltage Suppression: Provides rapid clamping of transient voltages to protect downstream components.
  • High Surge Capability: Capable of withstanding high surge currents without degradation.
  • Fast Response Time: Reacts quickly to transient voltage events, minimizing the risk of damage to sensitive components.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • High surge capability
  • Fast response time

Disadvantages

  • Higher cost compared to standard diodes
  • Requires careful consideration of placement in circuit design

Working Principles

The 5KP26C operates based on the principle of avalanche breakdown. When a transient voltage spike occurs, the diode rapidly conducts, diverting the excess energy away from the protected circuit. This action prevents the voltage from reaching levels that could damage sensitive components.

Detailed Application Field Plans

The 5KP26C is commonly used in various applications, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • 5KP22C: Lower breakdown voltage variant
  • 5KP30C: Higher breakdown voltage variant
  • P6KE27CA: Similar TVS diode with different package type

In conclusion, the 5KP26C transient voltage suppressor diode offers robust protection against transient overvoltage conditions, making it an essential component in safeguarding sensitive electronic circuits.

[Word Count: 413]

기술 솔루션에 5KP26C 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is 5KP26C?

    • 5KP26C is a type of transient voltage suppressor diode used to protect electronic circuits from voltage spikes and surges.

  2. What are the key features of 5KP26C?

    • The key features of 5KP26C include a peak pulse power of 5000W, low clamping voltage, fast response time, and high surge current capability.

  3. Where is 5KP26C commonly used in technical solutions?

    • 5KP26C is commonly used in applications such as power supplies, automotive electronics, industrial equipment, and telecommunications systems for surge protection.

  4. How does 5KP26C provide surge protection?

    • 5KP26C diverts excess voltage away from sensitive components by conducting when the voltage exceeds a certain level, thereby protecting the circuit from damage.

  5. What is the maximum clamping voltage of 5KP26C?

    • The maximum clamping voltage of 5KP26C is typically around 43.6V at a peak pulse current of 100A.

  6. Can 5KP26C be used for overvoltage protection in automotive applications?

    • Yes, 5KP26C is suitable for overvoltage protection in automotive applications due to its high surge current capability and robust construction.

  7. Is 5KP26C RoHS compliant?

    • Yes, 5KP26C is available in RoHS-compliant versions, making it suitable for use in environmentally conscious designs.

  8. What is the operating temperature range of 5KP26C?

    • The operating temperature range of 5KP26C is typically -55°C to +175°C, allowing it to function effectively in a wide range of environments.

  9. Does 5KP26C require any external components for proper operation?

    • In most cases, 5KP26C does not require additional external components for proper surge protection, simplifying its integration into technical solutions.

  10. Are there any recommended layout considerations for incorporating 5KP26C in a circuit?

    • It is recommended to minimize the length of the connections to 5KP26C and ensure a low-inductance path to the device for optimal performance in surge protection applications.