Littelfuse Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
P4KE36-B
자세히보기 데이터시트

P4KE36-B

Introduction

P4KE36-B is a diode belonging to the category of transient voltage suppressor (TVS) diodes. These diodes are used to protect sensitive electronic components from voltage spikes and transients. The P4KE36-B diode is designed to provide effective protection against overvoltage events in various electronic circuits.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Protection against voltage spikes and transients
  • Characteristics: Fast response time, low clamping voltage, high surge capability
  • Package: DO-41 or similar package
  • Essence: Provides transient voltage suppression for electronic circuits
  • Packaging/Quantity: Typically available in reels or bulk packaging, quantity varies by manufacturer

Specifications

  • Peak Power Dissipation: 400W
  • Breakdown Voltage: 36V
  • Operating Temperature Range: -55°C to 175°C
  • Storage Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The P4KE36-B diode typically has two leads in a DO-41 package, with the anode connected to one lead and the cathode connected to the other.

Functional Features

  • Transient Voltage Suppression: Effectively clamps transient voltages to protect downstream components.
  • Fast Response Time: Rapid reaction to voltage spikes ensures minimal impact on the protected circuit.
  • Low Clamping Voltage: Limits the voltage across the protected circuit during transient events.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage spikes and transients
  • Fast response time
  • Low clamping voltage

Disadvantages

  • Limited to specific voltage and power ratings
  • May require additional circuitry for comprehensive overvoltage protection

Working Principles

When a voltage spike occurs, the P4KE36-B diode conducts and clamps the voltage to a safe level, protecting the connected circuitry. This is achieved through the diode's ability to rapidly divert excess current away from the protected components.

Detailed Application Field Plans

The P4KE36-B diode finds application in various electronic systems, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • P4KE6.8-B: 6.8V breakdown voltage
  • P4KE10-B: 10V breakdown voltage
  • P4KE18-B: 18V breakdown voltage
  • P4KE24-B: 24V breakdown voltage

In conclusion, the P4KE36-B diode is a crucial component in protecting electronic circuits from voltage transients and spikes. Its fast response time, low clamping voltage, and high surge capability make it an essential part of many electronic systems.

[Word count: 411]

기술 솔루션에 P4KE36-B 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is P4KE36-B?

    • P4KE36-B is a type of transient voltage suppressor diode used to protect electronic circuits from voltage spikes and transients.

  2. What is the maximum voltage rating for P4KE36-B?

    • The maximum voltage rating for P4KE36-B is 36 volts.

  3. What is the typical application of P4KE36-B?

    • P4KE36-B is commonly used in technical solutions to protect sensitive electronic components, such as integrated circuits and semiconductors, from voltage surges and ESD (electrostatic discharge).

  4. How does P4KE36-B provide protection against voltage spikes?

    • P4KE36-B works by diverting excessive voltage away from the protected circuit, thereby limiting the voltage across the circuit to a safe level.

  5. What are the key features of P4KE36-B?

    • P4KE36-B features low clamping voltage, fast response time, and high surge capability, making it suitable for various industrial and consumer electronics applications.

  6. Can P4KE36-B be used in automotive applications?

    • Yes, P4KE36-B is often utilized in automotive electronics to safeguard sensitive components from voltage transients caused by factors like load dump and jump starts.

  7. Is P4KE36-B RoHS compliant?

    • Yes, P4KE36-B is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring its environmental friendliness.

  8. What is the operating temperature range for P4KE36-B?

    • P4KE36-B typically operates within a temperature range of -55°C to 175°C, allowing for reliable performance in various environments.

  9. Can P4KE36-B be used in telecommunications equipment?

    • Yes, P4KE36-B is suitable for use in telecommunications equipment to protect against voltage surges induced by lightning or power disturbances.

  10. Are there any recommended layout considerations when using P4KE36-B in a circuit?

    • It is advisable to minimize the length of traces between P4KE36-B and the protected circuit, and to ensure proper grounding and routing to optimize its protective function.