P6KE68C-B
Product Overview
Category
The P6KE68C-B belongs to the category of transient voltage suppressor (TVS) diodes.
Use
It is used to protect sensitive electronic components from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.
Characteristics
- Fast response time
- Low clamping voltage
- High surge current capability
Package
The P6KE68C-B is typically available in a DO-15 package.
Essence
The essence of the P6KE68C-B lies in its ability to divert excessive voltage away from sensitive components, thereby safeguarding them from damage.
Packaging/Quantity
These diodes are commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Peak Power Dissipation: 600W
- Breakdown Voltage: 61.1V to 67.4V
- Maximum Clamping Voltage: 103V at 10A
- Operating Temperature Range: -55°C to 175°C
Detailed Pin Configuration
The P6KE68C-B TVS diode has two pins, anode, and cathode, which are denoted by A and K respectively.
Functional Features
- Transient Suppression: The P6KE68C-B efficiently suppresses transient voltage spikes, protecting downstream components.
- Fast Response: It exhibits a rapid response time to transient events, ensuring minimal impact on the protected circuitry.
Advantages and Disadvantages
Advantages
- Effective protection against voltage transients
- Fast response time
- Wide operating temperature range
Disadvantages
- Limited to low-voltage applications
- May require additional circuitry for comprehensive surge protection
Working Principles
When a voltage transient occurs, the P6KE68C-B conducts excess current away from the protected circuit, limiting the voltage across it to a safe level.
Detailed Application Field Plans
The P6KE68C-B is widely used in: - Power supply units - Telecommunication equipment - Industrial control systems - Automotive electronics
Detailed and Complete Alternative Models
- P6KE6.8CA: Similar characteristics with a slightly lower breakdown voltage
- P6KE68A: Higher breakdown voltage variant for increased protection
In conclusion, the P6KE68C-B transient voltage suppressor diode offers efficient protection against voltage transients, making it an essential component in various electronic systems.
[Word count: 349]
기술 솔루션에 P6KE68C-B 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the P6KE68C-B?
- The P6KE68C-B is a transient voltage suppressor diode designed to protect electronic circuits from voltage spikes and transients.
What is the maximum peak pulse power of the P6KE68C-B?
- The maximum peak pulse power of the P6KE68C-B is 600 watts.
What is the breakdown voltage of the P6KE68C-B?
- The breakdown voltage of the P6KE68C-B is 68 volts.
How does the P6KE68C-B protect electronic circuits?
- The P6KE68C-B clamps the voltage during transient events, diverting excess current away from sensitive components and preventing damage.
What are the typical applications of the P6KE68C-B?
- The P6KE68C-B is commonly used in power supplies, automotive electronics, telecommunications equipment, and industrial control systems.
What is the response time of the P6KE68C-B?
- The response time of the P6KE68C-B is very fast, typically in the nanosecond range.
Can the P6KE68C-B be used for overvoltage protection in DC power lines?
- Yes, the P6KE68C-B is suitable for providing overvoltage protection in DC power lines.
Is the P6KE68C-B RoHS compliant?
- Yes, the P6KE68C-B is RoHS compliant, making it suitable for use in environmentally conscious designs.
What is the operating temperature range of the P6KE68C-B?
- The P6KE68C-B can operate within a temperature range of -55°C to 175°C.
Does the P6KE68C-B require any external components for proper operation?
- No, the P6KE68C-B is a standalone device and does not require additional external components for its operation.