Littelfuse Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
P6KE7.5
자세히보기 데이터시트

P6KE7.5 Diode - Encyclopedia Entry

Introduction

The P6KE7.5 diode is a crucial component in electronic circuits, providing protection against voltage transients and surges. This encyclopedia entry provides an in-depth overview of the P6KE7.5 diode, including its product details, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Overview

  • Category: Diode
  • Use: Voltage transient suppression
  • Characteristics: Fast response time, high surge capability
  • Package: Axial leaded
  • Essence: Protection against voltage spikes
  • Packaging/Quantity: Typically available in reels or bulk packaging

Specifications

  • Part Number: P6KE7.5
  • Peak Pulse Power: 600W
  • Breakdown Voltage: 7.5V
  • Operating Temperature Range: -55°C to +175°C
  • Mounting Type: Through Hole
  • Package / Case: DO-15

Detailed Pin Configuration

The P6KE7.5 diode has a standard axial leaded package with two leads. The cathode is typically marked with a band around one end of the diode body.

Functional Features

  • Transient Suppression: Rapidly clamps voltage transients to protect sensitive electronic components.
  • Fast Response Time: Reacts quickly to voltage spikes, diverting excess energy away from the circuit.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage surges
  • Fast response time
  • High surge capability

Disadvantages

  • Forward voltage drop may cause power loss in some applications
  • Requires careful consideration of placement in circuit design to ensure optimal performance

Working Principles

The P6KE7.5 diode operates based on the principle of avalanche breakdown. When a voltage spike occurs, the diode rapidly conducts, diverting the excess energy away from the protected circuit. This action helps prevent damage to sensitive electronic components.

Detailed Application Field Plans

The P6KE7.5 diode finds extensive use in various applications, including: - Power supply units - Telecommunication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • P6KE6.8: Breakdown Voltage - 6.8V
  • P6KE8.2: Breakdown Voltage - 8.2V
  • P6KE10: Breakdown Voltage - 10V
  • P6KE12: Breakdown Voltage - 12V

In conclusion, the P6KE7.5 diode is a critical component for protecting electronic circuits from voltage transients and surges. Its fast response time, high surge capability, and effective transient suppression make it an essential part of various electronic systems.

Word Count: 324

기술 솔루션에 P6KE7.5 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the P6KE7.5?

    • The P6KE7.5 is a type of transient voltage suppressor diode used to protect electronic circuits from voltage spikes and transients.

  2. Where is the P6KE7.5 commonly used?

    • The P6KE7.5 is commonly used in power supplies, automotive electronics, industrial equipment, and telecommunications systems.

  3. What is the maximum voltage rating of the P6KE7.5?

    • The P6KE7.5 has a maximum voltage rating of 7.5V.

  4. How does the P6KE7.5 protect electronic circuits?

    • The P6KE7.5 clamps the voltage during transient events, diverting excess current away from sensitive components and preventing damage.

  5. What is the peak pulse power handling capability of the P6KE7.5?

    • The P6KE7.5 can handle peak pulse power up to a specified level, typically around 600W.

  6. Is the P6KE7.5 polarity sensitive?

    • Yes, the P6KE7.5 is polarity sensitive and must be installed in the correct orientation for proper operation.

  7. Can multiple P6KE7.5 diodes be used in parallel for higher power applications?

    • Yes, multiple P6KE7.5 diodes can be used in parallel to increase the power handling capability.

  8. What are the temperature considerations for the P6KE7.5?

    • The P6KE7.5 operates within a specified temperature range, typically between -55°C to +175°C.

  9. Are there any specific mounting or layout requirements for the P6KE7.5?

    • The P6KE7.5 should be mounted close to the protected circuit and with short leads to minimize inductance.

  10. What are the failure modes of the P6KE7.5?

    • The P6KE7.5 can fail in either a short-circuit or open-circuit mode when subjected to excessive transient events. Regular testing and replacement are recommended for continued protection.