Littelfuse Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
P6KE7.5CA-B
자세히보기 데이터시트

P6KE7.5CA-B - Product Overview and Analysis

Introduction

The P6KE7.5CA-B belongs to the category of transient voltage suppressor diodes (TVS diodes) and is designed to protect electronic circuits from overvoltage transients. This entry provides a comprehensive overview of the P6KE7.5CA-B, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protecting electronic circuits from overvoltage transients
  • Characteristics: Fast response time, high surge capability, low clamping voltage
  • Package: DO-15
  • Essence: TVS diode for transient voltage protection
  • Packaging/Quantity: Available in tape and reel packaging with varying quantities

Specifications

  • Part Number: P6KE7.5CA-B
  • Peak Pulse Power: 600W
  • Breakdown Voltage: 7.5V
  • Maximum Clamping Voltage: 13.4V
  • Operating Temperature Range: -55°C to +175°C
  • Storage Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The P6KE7.5CA-B TVS diode has a standard DO-15 package with two leads. The anode lead is typically longer than the cathode lead, allowing for easy identification and installation.

Functional Features

  • Transient Voltage Suppression: Provides protection against voltage transients by diverting excessive current away from sensitive components.
  • Fast Response Time: Reacts quickly to transient events, minimizing the risk of damage to connected devices.
  • High Surge Capability: Capable of handling large surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • High surge capability

Disadvantages

  • Clamping voltage may be relatively high for some applications
  • Requires careful selection to ensure compatibility with specific circuit requirements

Working Principles

The P6KE7.5CA-B operates based on the principle of avalanche breakdown, where it rapidly conducts excess current when the voltage across it exceeds the breakdown voltage. This effectively limits the voltage across the protected circuit, preventing damage to sensitive components.

Detailed Application Field Plans

The P6KE7.5CA-B is commonly used in various electronic systems, including: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • P6KE6.8CA-B: Similar TVS diode with a lower breakdown voltage of 6.8V
  • P6KE8.2CA-B: Similar TVS diode with a higher breakdown voltage of 8.2V
  • P6KE10CA-B: Similar TVS diode with a higher breakdown voltage of 10V

In conclusion, the P6KE7.5CA-B transient voltage suppressor diode offers effective protection against overvoltage transients in various electronic applications. Its fast response time and high surge capability make it a valuable component in safeguarding sensitive circuits. However, careful consideration of its clamping voltage and compatibility with specific circuit requirements is essential for optimal performance.

[Word Count: 498]

기술 솔루션에 P6KE7.5CA-B 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure, here are 10 common questions and answers related to the application of P6KE7.5CA-B in technical solutions:

  1. What is the P6KE7.5CA-B?

    • The P6KE7.5CA-B is a transient voltage suppressor diode designed to protect electronic circuits from voltage spikes and transients.

  2. What is the maximum peak pulse power of P6KE7.5CA-B?

    • The maximum peak pulse power of P6KE7.5CA-B is 600 watts.

  3. What is the breakdown voltage of P6KE7.5CA-B?

    • The breakdown voltage of P6KE7.5CA-B is 7.5 volts.

  4. What are the typical applications of P6KE7.5CA-B?

    • P6KE7.5CA-B is commonly used in automotive electronics, industrial equipment, telecommunication systems, and power supplies to protect sensitive components from voltage surges.

  5. How does P6KE7.5CA-B protect electronic circuits?

    • P6KE7.5CA-B clamps the voltage during transient events, diverting excess current away from the protected circuit, thus preventing damage.

  6. What is the response time of P6KE7.5CA-B?

    • The response time of P6KE7.5CA-B is very fast, typically in the nanosecond range, providing quick protection against voltage spikes.

  7. Can P6KE7.5CA-B be used for overvoltage protection in power supply designs?

    • Yes, P6KE7.5CA-B is suitable for overvoltage protection in power supply designs, safeguarding sensitive components from voltage transients.

  8. Is P6KE7.5CA-B suitable for high-speed data lines protection?

    • Yes, P6KE7.5CA-B can be used to protect high-speed data lines from voltage surges and transients.

  9. What is the operating temperature range of P6KE7.5CA-B?

    • The operating temperature range of P6KE7.5CA-B is typically -55°C to +175°C, making it suitable for a wide range of environments.

  10. Are there any specific mounting or handling considerations for P6KE7.5CA-B?

    • P6KE7.5CA-B should be mounted close to the protected circuit and handled with appropriate ESD precautions to avoid damaging the device during installation.

I hope these answers provide the information you were looking for! Let me know if you need further assistance.