Littelfuse Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
P6SMBJ350C
자세히보기 데이터시트

P6SMBJ350C - Product Overview and Specifications

Introduction

The P6SMBJ350C is a diode belonging to the category of transient voltage suppressor (TVS) diodes. These diodes are widely used in electronic circuits to protect sensitive components from voltage spikes and transients. The P6SMBJ350C diode offers unique characteristics and features that make it suitable for various applications.

Basic Information Overview

  • Category: Transient Voltage Suppressor (TVS) Diode
  • Use: Protection against voltage spikes and transients
  • Characteristics: Fast response time, low clamping voltage, high surge current capability
  • Package: DO-214AA (SMB), SMA package
  • Essence: Safeguarding sensitive electronic components
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by manufacturer

Specifications

  • Voltage - Reverse Standoff (Typ): 298V
  • Voltage - Breakdown (Min): 331V
  • Voltage - Clamping (Max) @ Ipp: 519V
  • Current - Peak Pulse (10/1000µs): 19.2A
  • Power - Peak Pulse: 600W
  • Type: Zener

Detailed Pin Configuration

The P6SMBJ350C diode typically has two pins, anode, and cathode. The anode is connected to the positive side of the circuit, while the cathode is connected to the ground or negative side of the circuit.

Functional Features

  • Fast Response Time: Provides rapid protection against voltage spikes.
  • Low Clamping Voltage: Limits the voltage across the protected circuit.
  • High Surge Current Capability: Can handle large transient currents without damage.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Compact size and easy to integrate into circuits
  • Wide operating temperature range

Disadvantages

  • Limited to specific voltage and current ratings
  • May require additional circuitry for comprehensive protection in complex systems

Working Principles

When a voltage spike occurs in the circuit, the P6SMBJ350C diode quickly conducts, diverting the excess current away from the sensitive components. This action limits the voltage across the circuit, protecting it from potential damage.

Detailed Application Field Plans

The P6SMBJ350C diode finds extensive use in various applications, including: - Power supply units - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  • P6SMBJ300CA: Similar TVS diode with lower clamping voltage
  • P6SMBJ400CA: TVS diode with higher breakdown voltage
  • P6SMBJ33CA: TVS diode with lower standoff voltage

In conclusion, the P6SMBJ350C diode is a crucial component in protecting electronic circuits from voltage transients and spikes. Its fast response time, low clamping voltage, and high surge current capability make it an essential part of modern electronic systems.

Word Count: 410

기술 솔루션에 P6SMBJ350C 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the P6SMBJ350C?

    • The P6SMBJ350C is a transient voltage suppressor diode designed to protect sensitive electronic equipment from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.

  2. What is the maximum peak pulse power of the P6SMBJ350C?

    • The maximum peak pulse power of the P6SMBJ350C is 600 watts for a 10/1000μs waveform.

  3. What is the breakdown voltage of the P6SMBJ350C?

    • The breakdown voltage of the P6SMBJ350C is 350 volts.

  4. What are the typical applications of the P6SMBJ350C?

    • The P6SMBJ350C is commonly used in surge protection for telecommunications equipment, industrial control systems, consumer electronics, and automotive electronics.

  5. What is the operating temperature range of the P6SMBJ350C?

    • The P6SMBJ350C has an operating temperature range of -55°C to +150°C.

  6. What is the reverse stand-off voltage of the P6SMBJ350C?

    • The reverse stand-off voltage of the P6SMBJ350C is 350 volts.

  7. Does the P6SMBJ350C meet any industry standards?

    • Yes, the P6SMBJ350C is compliant with RoHS and REACH directives.

  8. Can the P6SMBJ350C be used in high-speed data line protection?

    • Yes, the P6SMBJ350C is suitable for high-speed data line protection due to its fast response time and low clamping voltage.

  9. What package type does the P6SMBJ350C come in?

    • The P6SMBJ350C is available in a DO-214AA (SMB) package.

  10. Is the P6SMBJ350C suitable for use in outdoor applications?

    • Yes, the P6SMBJ350C is suitable for outdoor applications as it provides robust transient voltage protection for outdoor electronic equipment.