Littelfuse Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SMDJ16C
자세히보기 데이터시트

SMDJ16C - Product Overview and Analysis

Introduction

The SMDJ16C is a crucial component in the field of electronics, belonging to the category of transient voltage suppressor diodes. This entry will provide an in-depth overview of the SMDJ16C, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protecting sensitive electronic devices from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events.
  • Characteristics: Fast response time, low clamping voltage, high surge current capability.
  • Package: Surface Mount Device (SMD)
  • Essence: Safeguarding electronic circuits from voltage spikes and surges.
  • Packaging/Quantity: Typically available in reels or tubes containing a specific quantity of units.

Specifications

  • Voltage Rating: 16V
  • Peak Pulse Power: 3000W
  • Breakdown Voltage Range: 17.8V - 22.2V
  • Operating Temperature Range: -55°C to +150°C
  • Package Type: DO-214AB (SMC)

Detailed Pin Configuration

The SMDJ16C typically follows the standard pin configuration for SMC package diodes, with two leads for connection to the circuit board.

Functional Features

  • Transient Voltage Suppression: Rapidly clamps transient voltages to safe levels, protecting downstream components.
  • Low Clamping Voltage: Ensures minimal stress on protected circuits during transient events.
  • High Surge Current Capability: Can handle large transient currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • Compact SMD package for space-constrained applications

Disadvantages

  • Limited to specific voltage ratings
  • Requires careful consideration of placement in circuit design

Working Principles

The SMDJ16C operates by diverting excessive transient currents away from sensitive components, thereby limiting the voltage across them. When a transient event occurs, the diode rapidly switches into a low-impedance state, shunting the excess energy to ground.

Detailed Application Field Plans

The SMDJ16C finds extensive use in various electronic systems, including: - Telecommunication equipment - Industrial control systems - Automotive electronics - Consumer electronics - Power supplies

Detailed and Complete Alternative Models

Several alternative models to the SMDJ16C include: - SMDJ5.0A - SMDJ10A - SMDJ20CA - SMDJ30A - SMDJ40CA

In conclusion, the SMDJ16C plays a vital role in safeguarding electronic circuits from transient voltage events, offering fast response times and high surge current capabilities. Its application spans across diverse industries, making it an indispensable component in modern electronic designs.

Word Count: 411

기술 솔루션에 SMDJ16C 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the SMDJ16C?

    • The SMDJ16C is a transient voltage suppressor diode designed to protect sensitive electronic components from voltage spikes and transients.

  2. What is the maximum clamping voltage of the SMDJ16C?

    • The maximum clamping voltage of the SMDJ16C is 25.6 volts at 10A.

  3. What is the peak pulse power of the SMDJ16C?

    • The peak pulse power of the SMDJ16C is 3000 watts for a 10/1000μs waveform.

  4. What are the typical applications of the SMDJ16C?

    • The SMDJ16C is commonly used in surge protection for telecommunications equipment, industrial electronics, and automotive systems.

  5. What is the operating temperature range of the SMDJ16C?

    • The SMDJ16C has an operating temperature range of -55°C to +150°C.

  6. What is the breakdown voltage of the SMDJ16C?

    • The breakdown voltage of the SMDJ16C is 17.8 volts.

  7. What package type does the SMDJ16C come in?

    • The SMDJ16C is available in a DO-214AB (SMC) package.

  8. Is the SMDJ16C RoHS compliant?

    • Yes, the SMDJ16C is RoHS compliant, making it suitable for use in environmentally sensitive applications.

  9. What is the response time of the SMDJ16C?

    • The response time of the SMDJ16C is very fast, typically less than 1 picosecond.

  10. Can the SMDJ16C be used for overvoltage protection in power supply circuits?

    • Yes, the SMDJ16C is suitable for providing overvoltage protection in power supply circuits, helping to safeguard sensitive components from voltage surges.