Littelfuse Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SMDJ30CA-T7

SMDJ30CA-T7

Introduction

The SMDJ30CA-T7 is a diode belonging to the category of transient voltage suppressors (TVS). This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of the SMDJ30CA-T7.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diode
  • Use: Protecting sensitive electronic devices from voltage transients
  • Characteristics: Fast response time, low clamping voltage, high surge current capability
  • Package: SMC (DO-214AB)
  • Essence: Safeguarding against voltage spikes and surges
  • Packaging/Quantity: Tape & Reel, 1500 units per reel

Specifications

  • Peak Pulse Power: 3000W
  • Breakdown Voltage: 33.3V
  • Operating Voltage: 28.2V
  • Maximum Reverse Leakage Current: 1µA
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The SMDJ30CA-T7 has a standard SMC (DO-214AB) package with two pins. The pinout configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Rapid response to transient over-voltage conditions
  • Low clamping voltage to protect sensitive components
  • High surge current capability for robust protection

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • Compact SMC package for space-constrained applications

Disadvantages

  • Limited power dissipation capability compared to larger TVS diodes
  • Higher cost compared to traditional diode-based protection methods

Working Principles

The SMDJ30CA-T7 operates by diverting excessive voltage transients away from sensitive electronic components. When a transient voltage spike occurs, the diode rapidly conducts, shunting the excess energy to ground and limiting the voltage across the protected circuit.

Detailed Application Field Plans

The SMDJ30CA-T7 is widely used in various applications, including: - Telecommunication equipment - Industrial control systems - Automotive electronics - Power supplies - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the SMDJ30CA-T7 include: - P6SMB33CA - 1.5SMC33CA - SMBJ33CA - P4SMA33CA

In conclusion, the SMDJ30CA-T7 is a vital component in protecting electronic devices from voltage transients, offering fast response, low clamping voltage, and high surge current capability. Its compact package and efficient operation make it suitable for a wide range of applications.

[Word Count: 398]

기술 솔루션에 SMDJ30CA-T7 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure, here are 10 common questions and answers related to the application of SMDJ30CA-T7 in technical solutions:

  1. What is the maximum peak pulse power dissipation of SMDJ30CA-T7?

    • The maximum peak pulse power dissipation of SMDJ30CA-T7 is 3000 watts for a 10/1000 µs waveform.

  2. What is the breakdown voltage of SMDJ30CA-T7?

    • The breakdown voltage of SMDJ30CA-T7 is 30 volts.

  3. What is the typical clamping voltage of SMDJ30CA-T7 under surge conditions?

    • The typical clamping voltage of SMDJ30CA-T7 is 48.4 volts at 100A.

  4. What is the operating temperature range of SMDJ30CA-T7?

    • The operating temperature range of SMDJ30CA-T7 is -55°C to +150°C.

  5. What is the peak pulse current capability of SMDJ30CA-T7?

    • The peak pulse current capability of SMDJ30CA-T7 is 600A for an 8/20 µs waveform.

  6. What are the typical applications of SMDJ30CA-T7?

    • SMDJ30CA-T7 is commonly used in protection of sensitive electronic equipment against voltage transients induced by lightning, inductive load switching, and electrostatic discharge (ESD).

  7. What is the package type of SMDJ30CA-T7?

    • SMDJ30CA-T7 is available in a surface mount DO-214AB (SMC) package.

  8. Is SMDJ30CA-T7 RoHS compliant?

    • Yes, SMDJ30CA-T7 is RoHS compliant, making it suitable for use in environmentally friendly applications.

  9. What is the lead-free status of SMDJ30CA-T7?

    • SMDJ30CA-T7 is lead-free and compatible with lead-free soldering processes.

  10. What are the key advantages of using SMDJ30CA-T7 in technical solutions?

    • The key advantages of using SMDJ30CA-T7 include its high surge capability, low clamping voltage, and compact surface mount package, making it ideal for space-constrained applications requiring robust transient voltage suppression.

I hope this information is helpful! Let me know if you need further assistance.