Meixin Integrated
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MAX16034PLB26+T
자세히보기 데이터시트

MAX16034PLB26+T

Product Overview

Category

The MAX16034PLB26+T belongs to the category of voltage supervisors.

Use

It is primarily used for monitoring and controlling the voltage levels in electronic circuits.

Characteristics

  • Voltage supervision range: 2.6V
  • Low quiescent current: 5µA
  • Wide operating temperature range: -40°C to +125°C
  • Small package size: SOT23-5
  • RoHS compliant

Package

The MAX16034PLB26+T comes in a small SOT23-5 package, which is suitable for space-constrained applications.

Essence

The essence of the MAX16034PLB26+T is its ability to provide accurate voltage monitoring and reset generation for microcontrollers and other digital systems.

Packaging/Quantity

This product is typically available in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Supply voltage range: 1.6V to 5.5V
  • Threshold voltage accuracy: ±1.5%
  • Reset timeout period: 140ms (typical)
  • Power-on reset delay: 20ms (typical)
  • Operating current: 5µA (typical)

Detailed Pin Configuration

The MAX16034PLB26+T has the following pin configuration:

  1. GND (Ground)
  2. RESET (Reset Output)
  3. MR (Manual Reset Input)
  4. VCC (Supply Voltage)
  5. TH (Threshold Voltage)

Functional Features

  1. Voltage Monitoring: The MAX16034PLB26+T continuously monitors the supply voltage and generates a reset signal when it falls below the threshold voltage.
  2. Manual Reset: The MR pin allows for manual reset control, enabling system restarts when necessary.
  3. Power-On Reset: The device provides a power-on reset delay to ensure stable operation during power-up.
  4. Low Quiescent Current: With a low quiescent current of 5µA, the MAX16034PLB26+T minimizes power consumption.

Advantages and Disadvantages

Advantages

  • Accurate voltage monitoring
  • Small package size for space-constrained applications
  • Wide operating temperature range
  • Low quiescent current for power efficiency

Disadvantages

  • Limited threshold voltage options
  • Manual reset functionality may not be required in all applications

Working Principles

The MAX16034PLB26+T operates by comparing the supply voltage with the threshold voltage set by the TH pin. When the supply voltage drops below the threshold voltage, the device generates a reset signal on the RESET pin. This reset signal can be used to initiate system resets or perform other necessary actions.

Detailed Application Field Plans

The MAX16034PLB26+T finds applications in various fields, including: 1. Battery-powered devices 2. Embedded systems 3. Industrial automation 4. Automotive electronics 5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MAX16034PLB26+T include: 1. MAX16032PLB26+T 2. MAX16035PLB26+T 3. MAX16036PLB26+T 4. MAX16037PLB26+T 5. MAX16038PLB26+T

These alternative models provide different threshold voltage options and may have additional features tailored to specific application requirements.

Word count: 452 words

기술 솔루션에 MAX16034PLB26+T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MAX16034PLB26+T in technical solutions:

  1. Q: What is the MAX16034PLB26+T? A: The MAX16034PLB26+T is a low-power, voltage-monitoring circuit designed for use in various technical solutions.

  2. Q: What is the operating voltage range of MAX16034PLB26+T? A: The operating voltage range of MAX16034PLB26+T is from 1.6V to 5.5V.

  3. Q: How does MAX16034PLB26+T monitor voltage? A: MAX16034PLB26+T monitors voltage by comparing the input voltage with a preset threshold voltage.

  4. Q: Can MAX16034PLB26+T be used to detect undervoltage conditions? A: Yes, MAX16034PLB26+T can be used to detect undervoltage conditions by setting the threshold voltage below the desired minimum voltage level.

  5. Q: Is MAX16034PLB26+T suitable for battery-powered applications? A: Yes, MAX16034PLB26+T is suitable for battery-powered applications due to its low-power consumption.

  6. Q: Can MAX16034PLB26+T be used as a power-on reset (POR) circuit? A: Yes, MAX16034PLB26+T can be used as a POR circuit to ensure proper initialization of a system when power is applied.

  7. Q: What is the typical quiescent current of MAX16034PLB26+T? A: The typical quiescent current of MAX16034PLB26+T is very low, typically around 1µA.

  8. Q: Does MAX16034PLB26+T have an adjustable threshold voltage? A: No, MAX16034PLB26+T has a fixed threshold voltage of 2.6V.

  9. Q: Can MAX16034PLB26+T be used in automotive applications? A: Yes, MAX16034PLB26+T is suitable for automotive applications as it meets the necessary requirements and standards.

  10. Q: What is the package type of MAX16034PLB26+T? A: MAX16034PLB26+T is available in a small SOT23-5 package, which is compact and easy to integrate into various designs.

Please note that these answers are general and may vary depending on specific application requirements.