MAX1658ESA+ - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuits (ICs)

Use: The MAX1658ESA+ is a high-efficiency, step-down DC-DC converter designed for use in various electronic devices. It provides a regulated output voltage from a wide input voltage range.

Characteristics: - High efficiency: The MAX1658ESA+ offers up to 95% efficiency, minimizing power loss and maximizing battery life. - Wide input voltage range: It can accept input voltages ranging from 4.5V to 28V, making it suitable for a wide range of applications. - Adjustable output voltage: The output voltage can be adjusted using external resistors, allowing flexibility in different applications. - Low quiescent current: The device consumes minimal current when in standby mode, reducing power consumption.

Package: The MAX1658ESA+ is available in a small surface-mount SOIC package.

Essence: This IC is an essential component in power management circuits, providing efficient voltage regulation for various electronic devices.

Packaging/Quantity: The MAX1658ESA+ is typically sold in reels containing 250 units.

Specifications

• Input Voltage Range: 4.5V to 28V
• Output Voltage Range: Adjustable (based on external resistors)
• Maximum Output Current: 1.5A
• Efficiency: Up to 95%
• Quiescent Current: 120µA (typical)
• Operating Temperature Range: -40°C to +85°C
• Package Type: SOIC

Pin Configuration

The MAX1658ESA+ has the following pin configuration:

```

---

| | --| VIN GND |-- Pin 1: Input Voltage (VIN) --| SW FB |-- Pin 2: Switching Node (SW) --| LX EN |-- Pin 3: Inductor Connection (LX) --| PGND VOUT|-- Pin 4: Power Ground (PGND) --| AGND SS |-- Pin 5: Analog Ground (AGND) / Soft-Start (SS) --| UVLO OC |-- Pin 6: Undervoltage Lockout (UVLO) / Overcurrent Protection (OC) --| SYNC NC |-- Pin 7: Synchronization (SYNC) / No Connection (NC) --| COMP FB2 |-- Pin 8: Compensation (COMP) / Feedback 2 (FB2) |___________| ```

Functional Features

1. High Efficiency: The MAX1658ESA+ utilizes a synchronous rectification scheme and optimized control algorithms to achieve high conversion efficiency, reducing power dissipation.
2. Wide Input Voltage Range: With its wide input voltage range of 4.5V to 28V, the IC can handle various input sources, including batteries and different power supplies.
3. Adjustable Output Voltage: The output voltage can be easily adjusted using external resistors, allowing customization for specific application requirements.
4. Protection Features: The MAX1658ESA+ incorporates built-in protection mechanisms such as undervoltage lockout (UVLO) and overcurrent protection (OCP), ensuring safe operation and preventing damage to the device and connected components.
5. Soft-Start Function: The soft-start feature allows for gradual ramp-up of the output voltage, minimizing inrush current and improving system reliability.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption and longer battery life. - Wide input voltage range enables compatibility with various power sources. - Adjustable output voltage provides flexibility for different applications. - Integrated protection features enhance system reliability and prevent damage.

Disadvantages: - Limited maximum output current of 1.5A may not be suitable for high-power applications. - The SOIC package may require surface-mount soldering expertise.

Working Principles

The MAX1658ESA+ operates as a step-down (buck) DC-DC converter. It uses a pulse-width modulation (PWM) control scheme to regulate the output voltage. The input voltage is first stepped down using an inductor and switched on and off by a power MOSFET. The resulting voltage is then filtered and fed to the load.

The IC continuously monitors the output voltage and adjusts the duty cycle of the switching signal to maintain a stable output voltage, even with varying input conditions. This control mechanism ensures efficient power transfer and voltage regulation.

Detailed Application Field Plans

The MAX1658ESA+ finds applications in various electronic devices that require efficient voltage regulation, such as: - Portable electronic devices (e.g., smartphones, tablets) - Battery-powered systems - Industrial equipment - Automotive electronics - LED lighting systems

Detailed and Complete Alternative Models

1. LM2596S-ADJ: A