Meixin Integrated
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MAX16930BATLR/V+T
자세히보기 데이터시트

MAX16930BATLR/V+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Wide Input Voltage Range
  • Package: 40-Pin Thin QFN (5mm x 5mm)
  • Essence: Power Management IC for Automotive Applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 36V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 3A
  • Quiescent Current: 17µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. PGND: Power Ground
  7. BST: Boost Pin
  8. SS: Soft-Start Pin
  9. COMP: Compensation Pin
  10. ILIM: Current Limit Pin
  11. MODE: Mode Selection Pin
  12. CLK: Clock Synchronization Pin
  13. SYNC: Synchronization Pin
  14. VCC: Supply Voltage
  15. AGND: Analog Ground
  16. NC: No Connection
  17. NC: No Connection
  18. NC: No Connection
  19. NC: No Connection
  20. NC: No Connection
  21. NC: No Connection
  22. NC: No Connection
  23. NC: No Connection
  24. NC: No Connection
  25. NC: No Connection
  26. NC: No Connection
  27. NC: No Connection
  28. NC: No Connection
  29. NC: No Connection
  30. NC: No Connection
  31. NC: No Connection
  32. NC: No Connection
  33. NC: No Connection
  34. NC: No Connection
  35. NC: No Connection
  36. NC: No Connection
  37. NC: No Connection
  38. NC: No Connection
  39. NC: No Connection
  40. NC: No Connection

Functional Features

  • Wide input voltage range allows for versatile applications in automotive systems.
  • High efficiency ensures minimal power loss during operation.
  • Low quiescent current enables energy-saving performance.
  • Integrated protection features such as overvoltage, undervoltage, and overcurrent protection enhance system reliability.
  • Soft-start functionality prevents excessive inrush current during startup.

Advantages and Disadvantages

Advantages: - Wide input voltage range accommodates various automotive power sources. - High efficiency reduces power dissipation and improves overall system performance. - Low quiescent current prolongs battery life and enhances energy efficiency. - Integrated protection features ensure safe and reliable operation.

Disadvantages: - Limited maximum output current may restrict usage in high-power applications. - Complex pin configuration may require careful attention during circuit design.

Working Principles

The MAX16930BATLR/V+T is a power management IC designed for automotive applications. It operates by converting the input voltage to a regulated output voltage with high efficiency. The device incorporates a boost converter topology to achieve a wide input voltage range while maintaining a stable output voltage. Various protection features are integrated to safeguard the system from voltage spikes, overcurrent conditions, and other potential faults.

Detailed Application Field Plans

The MAX16930BATLR/V+T is commonly used in automotive systems, including but not limited to:

  1. Electric Vehicles (EVs) and Hybrid Electric Vehicles (HEVs)
  2. Automotive Infotainment Systems
  3. Advanced Driver Assistance Systems (ADAS)
  4. Lighting Systems
  5. Powertrain Control Modules
  6. Battery Management Systems (BMS)
  7. Telematics and Connectivity Modules

Detailed and Complete Alternative Models

  1. MAX16930BATLR/V+T: 40-Pin Thin QFN Package, 3A Output Current
  2. MAX16930BAWTLR/V+T: 40-Pin WLP Package, 3A Output Current
  3. MAX16930BATL/V+T: 40-Pin Thin QFN Package, 2A Output Current
  4. MAX16930BAWL/V+T: 40-Pin WLP Package, 2A Output Current
  5. MAX16930BATLX/V+T: 40-Pin Thin QFN Package, 3A Output Current, Extended Temperature Range

(Note: The above list is not exhaustive and may vary based on availability and specific requirements.)

Word count: 533 words

기술 솔루션에 MAX16930BATLR/V+T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the input voltage range of MAX16930BATLR/V+T?
    - The input voltage range of MAX16930BATLR/V+T is 4.5V to 36V.

  2. What is the maximum output current of MAX16930BATLR/V+T?
    - The maximum output current of MAX16930BATLR/V+T is 3A.

  3. Can MAX16930BATLR/V+T be used in automotive applications?
    - Yes, MAX16930BATLR/V+T is suitable for automotive applications.

  4. What is the typical efficiency of MAX16930BATLR/V+T?
    - The typical efficiency of MAX16930BATLR/V+T is 95%.

  5. Does MAX16930BATLR/V+T have overcurrent protection?
    - Yes, MAX16930BATLR/V+T features overcurrent protection.

  6. Is thermal shutdown included in MAX16930BATLR/V+T?
    - Yes, MAX16930BATLR/V+T includes thermal shutdown.

  7. What is the operating temperature range of MAX16930BATLR/V+T?
    - The operating temperature range of MAX16930BATLR/V+T is -40°C to +125°C.

  8. Can MAX16930BATLR/V+T be used in LED lighting applications?
    - Yes, MAX16930BATLR/V+T can be used in LED lighting applications.

  9. What type of package does MAX16930BATLR/V+T come in?
    - MAX16930BATLR/V+T is available in a 16-pin TQFN package.

  10. Is there an evaluation kit available for MAX16930BATLR/V+T?
    - Yes, an evaluation kit for MAX16930BATLR/V+T is available for testing and prototyping purposes.