MAX1896EUT#TG16

Product Overview

Category

MAX1896EUT#TG16 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in power management applications.

Characteristics

• High efficiency
• Low quiescent current
• Wide input voltage range
• Adjustable output voltage
• Overcurrent protection
• Thermal shutdown protection

Package

MAX1896EUT#TG16 is available in a small 6-pin SOT23 package.

Essence

The essence of MAX1896EUT#TG16 lies in its ability to efficiently regulate and manage power in various electronic devices.

Packaging/Quantity

This IC is typically packaged in reels, with each reel containing a specific quantity of units. The exact packaging and quantity may vary depending on the supplier.

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 1.2V to 3.3V
• Quiescent Current: 20µA (typical)
• Efficiency: Up to 95%
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

MAX1896EUT#TG16 features the following pin configuration:

1. VIN (Input Voltage)
2. GND (Ground)
3. FB (Feedback)
4. EN (Enable)
5. SW (Switch)
6. VOUT (Output Voltage)

Functional Features

• High Efficiency: The MAX1896EUT#TG16 offers high efficiency, ensuring minimal power loss during voltage regulation.
• Low Quiescent Current: With a low quiescent current, this IC minimizes power consumption when the load is light or inactive.
• Wide Input Voltage Range: The wide input voltage range allows for compatibility with various power sources.
• Adjustable Output Voltage: The output voltage can be adjusted within a specified range to meet the requirements of different applications.
• Overcurrent Protection: MAX1896EUT#TG16 incorporates overcurrent protection, safeguarding the circuit from excessive current flow.
• Thermal Shutdown Protection: In case of overheating, the IC automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

• High efficiency leads to reduced power loss.
• Low quiescent current minimizes power consumption.
• Wide input voltage range enhances compatibility.
• Adjustable output voltage allows for flexibility in application.
• Overcurrent and thermal shutdown protection ensure safety and reliability.

Disadvantages

• Limited output voltage range may not suit all applications.
• Availability and pricing may vary depending on the supplier.

Working Principles

MAX1896EUT#TG16 operates as a step-down (buck) converter. It takes an input voltage and efficiently converts it to a lower, regulated output voltage. The feedback pin (FB) is used to set the desired output voltage, which can be adjusted within the specified range. The enable pin (EN) controls the operation of the IC, allowing for easy on/off control. The switch pin (SW) handles the switching of the internal MOSFET, while the VIN and GND pins provide the necessary power and ground connections.

Detailed Application Field Plans

MAX1896EUT#TG16 finds applications in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Wearable technology - Industrial automation

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MAX1896EUT#TG16 include: - MAX1896EUT-T - MAX1896EUT-TG075 - MAX1896EUT-TG10 - MAX1896EUT-TG25

These alternative models may have slight variations in specifications, packaging, or pricing. It is recommended to refer to the respective datasheets for detailed information.

Word count: 526 words