Meixin Integrated
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MAX5068BAUE-T
자세히보기 데이터시트

MAX5068BAUE-T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: 16-TSSOP
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 76V
  • Output Voltage Range: 0.6V to 75V
  • Output Current: Up to 2A
  • Switching Frequency: 100kHz to 1MHz
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The MAX5068BAUE-T has a 16-pin TSSOP package with the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. FB: Feedback Voltage
  4. EN: Enable Control
  5. SS/TR: Soft-Start/Tracking Control
  6. SYNC: Synchronization Input
  7. VCC: Supply Voltage
  8. PGND: Power Ground
  9. SW: Switch Node
  10. BST: Bootstrap Capacitor Connection
  11. COMP: Compensation Node
  12. SS/TR: Soft-Start/Tracking Control
  13. SYNC: Synchronization Input
  14. VCC: Supply Voltage
  15. PGND: Power Ground
  16. SW: Switch Node

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency ensures minimal power loss.
  • Low power consumption contributes to energy savings.
  • Adjustable output voltage provides flexibility.
  • Overcurrent and overtemperature protection ensure safe operation.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power dissipation. - Wide input voltage range allows for compatibility with various power sources. - Overcurrent and overtemperature protection enhance reliability.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Synchronization input may require additional circuitry for certain setups.

Working Principles

The MAX5068BAUE-T is a voltage regulator that converts an input voltage to a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The input voltage is first stepped down using a power MOSFET and an inductor, and then filtered to provide a stable output voltage. The feedback control loop ensures the output voltage remains within the desired range.

Detailed Application Field Plans

The MAX5068BAUE-T can be used in various applications, including but not limited to:

  1. Industrial Power Supplies
  2. Automotive Electronics
  3. Telecommunications Equipment
  4. Battery-Powered Systems
  5. Distributed Power Systems

Detailed and Complete Alternative Models

  1. MAX5069BAUE-T: Similar specifications, different pin configuration (20-TSSOP package).
  2. MAX5070BAUE-T: Higher output current (up to 3A), similar pin configuration (16-TSSOP package).
  3. MAX5071BAUE-T: Lower input voltage range (up to 36V), similar pin configuration (16-TSSOP package).

These alternative models offer similar functionality and can be considered based on specific requirements.

Word count: 346 words

기술 솔루션에 MAX5068BAUE-T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MAX5068BAUE-T in technical solutions:

  1. Q: What is the MAX5068BAUE-T? A: The MAX5068BAUE-T is a high-efficiency, synchronous step-down DC-DC converter IC.

  2. Q: What is the input voltage range of the MAX5068BAUE-T? A: The input voltage range of the MAX5068BAUE-T is typically between 4.5V and 36V.

  3. Q: What is the output voltage range of the MAX5068BAUE-T? A: The output voltage range of the MAX5068BAUE-T can be adjusted from 0.6V to 0.9 x VIN.

  4. Q: What is the maximum output current of the MAX5068BAUE-T? A: The maximum output current of the MAX5068BAUE-T is 3A.

  5. Q: Does the MAX5068BAUE-T require an external compensation network? A: No, the MAX5068BAUE-T has an internal compensation network, eliminating the need for external components.

  6. Q: Can the MAX5068BAUE-T operate in a wide temperature range? A: Yes, the MAX5068BAUE-T can operate in a temperature range of -40°C to +125°C.

  7. Q: Does the MAX5068BAUE-T have built-in protection features? A: Yes, the MAX5068BAUE-T includes overcurrent protection, thermal shutdown, and undervoltage lockout.

  8. Q: What is the efficiency of the MAX5068BAUE-T? A: The efficiency of the MAX5068BAUE-T can reach up to 95% under typical operating conditions.

  9. Q: Can the MAX5068BAUE-T be used in battery-powered applications? A: Yes, the low quiescent current and high efficiency of the MAX5068BAUE-T make it suitable for battery-powered applications.

  10. Q: What package does the MAX5068BAUE-T come in? A: The MAX5068BAUE-T is available in a 16-pin TSSOP package.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.