이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MAX5072ETJ+T

MAX5072ETJ+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Dissipation
  • Package: 32-Pin TQFN (Thin Quad Flat No-Lead)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Output Current: Up to 2A
  • Switching Frequency: 100kHz to 1MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX5072ETJ+T has a total of 32 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. FB: Feedback Voltage
  4. EN: Enable Control
  5. SS/TRK: Soft-Start/Tracking Control
  6. SYNC: Synchronization Input
  7. VCC: Supply Voltage for Internal Circuitry
  8. PGND: Power Ground
  9. SW: Switch Node
  10. BST: Bootstrap Capacitor Connection
  11. COMP: Compensation Node
  12. AGND: Analog Ground
  13. RT: Oscillator Timing Resistor
  14. CT: Oscillator Timing Capacitor
  15. SS/TRK: Soft-Start/Tracking Control
  16. SYNC: Synchronization Input
  17. VCC: Supply Voltage for Internal Circuitry
  18. PGND: Power Ground
  19. SW: Switch Node
  20. BST: Bootstrap Capacitor Connection
  21. COMP: Compensation Node
  22. AGND: Analog Ground
  23. RT: Oscillator Timing Resistor
  24. CT: Oscillator Timing Capacitor
  25. SS/TRK: Soft-Start/Tracking Control
  26. SYNC: Synchronization Input
  27. VCC: Supply Voltage for Internal Circuitry
  28. PGND: Power Ground
  29. SW: Switch Node
  30. BST: Bootstrap Capacitor Connection
  31. COMP: Compensation Node
  32. AGND: Analog Ground

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency and low power dissipation result in energy savings.
  • Adjustable output voltage provides flexibility.
  • Integrated protection features ensure safe operation.

Advantages and Disadvantages

Advantages: - Wide input voltage range enables compatibility with various power sources. - High efficiency reduces power wastage and improves overall system performance. - Adjustable output voltage allows for customization based on specific requirements. - Integrated protection features enhance reliability and prevent damage.

Disadvantages: - Complex pin configuration may require careful attention during installation. - Limited output current may not be suitable for high-power applications. - Higher cost compared to some alternative models.

Working Principles

The MAX5072ETJ+T is a voltage regulator that converts an input voltage within the range of 4.5V to 60V into a regulated output voltage between 0.8V and 55V. It utilizes a switching frequency of 100kHz to 1MHz to efficiently step down the input voltage. The integrated control circuitry ensures stable output voltage despite variations in input voltage and load conditions. Various protection features, such as overvoltage and overcurrent protection, safeguard the connected devices.

Detailed Application Field Plans

The MAX5072ETJ+T finds applications in various fields, including:

  1. Industrial Automation: Powering control systems, motor drives, and sensors.
  2. Automotive Electronics: Providing regulated power to infotainment systems, lighting modules, and advanced driver-assistance systems (ADAS).
  3. Telecommunications: Powering base stations, routers, and network equipment.
  4. Renewable Energy: Regulating power in solar inverters and wind turbines.
  5. Consumer Electronics: Powering portable devices, home appliances, and audio/video equipment.

Detailed and Complete Alternative Models

  1. LM2576-ADJ: Adjustable Voltage Regulator, 3A Output Current, TO-220 Package.
  2. LT1084CP-ADJ: Adjustable Linear Regulator, 5A Output Current, TO-3 Package.
  3. TPS5430-ADJ: Adjustable Step-Down Converter, 3A Output Current, SOIC-8 Package.
  4. ADP2303-ADJ: Adjustable Synchronous Buck Converter, 2A Output Current, QFN-16 Package.
  5. LM2678-ADJ: Adjustable Switching Regulator, 5A Output Current, TO-263 Package.

These alternative models offer similar functionality and can be considered based on specific requirements and design constraints.

Word count: 514 words

기술 솔루션에 MAX5072ETJ+T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MAX5072ETJ+T in technical solutions:

  1. Q: What is the MAX5072ETJ+T? A: The MAX5072ETJ+T is a high-voltage, low-quiescent current linear regulator with an adjustable output voltage.

  2. Q: What is the input voltage range of the MAX5072ETJ+T? A: The input voltage range of the MAX5072ETJ+T is from 6V to 60V.

  3. Q: What is the maximum output current of the MAX5072ETJ+T? A: The maximum output current of the MAX5072ETJ+T is 100mA.

  4. Q: Can the output voltage be adjusted on the MAX5072ETJ+T? A: Yes, the output voltage can be adjusted using external resistors.

  5. Q: What is the typical quiescent current of the MAX5072ETJ+T? A: The typical quiescent current of the MAX5072ETJ+T is 25µA.

  6. Q: Is the MAX5072ETJ+T suitable for battery-powered applications? A: Yes, the low quiescent current and wide input voltage range make it suitable for battery-powered applications.

  7. Q: Does the MAX5072ETJ+T have built-in thermal shutdown protection? A: Yes, the MAX5072ETJ+T has built-in thermal shutdown protection to prevent overheating.

  8. Q: Can the MAX5072ETJ+T operate in harsh environments? A: Yes, the MAX5072ETJ+T is designed to operate in extended temperature ranges and is suitable for harsh environments.

  9. Q: What is the package type of the MAX5072ETJ+T? A: The MAX5072ETJ+T comes in a 32-pin TQFN package.

  10. Q: Are there any evaluation boards or reference designs available for the MAX5072ETJ+T? A: Yes, Maxim Integrated provides evaluation boards and reference designs to help with the application of the MAX5072ETJ+T in technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and application notes for detailed information.