MAX6385XS24D4-T

Product Overview

Category

MAX6385XS24D4-T belongs to the category of voltage supervisors.

Use

It is primarily used for monitoring and controlling the voltage levels in electronic circuits.

Characteristics

• Voltage supervision range: 2.4V
• Package type: SOT23-4
• Operating temperature range: -40°C to +85°C
• Supply current: 7µA (typical)
• Output type: Active low, push-pull

Package and Quantity

The MAX6385XS24D4-T comes in a SOT23-4 package. It is typically sold in reels or tubes containing multiple units.

Specifications

• Input voltage range: 1V to 6V
• Threshold voltage accuracy: ±1.5%
• Reset timeout period: 140ms (typical)
• Quiescent current: 7µA (typical)
• Power-on reset delay time: 20ms (typical)

Pin Configuration

The MAX6385XS24D4-T has four pins arranged as follows:

```

---

| | --| |-- |____| ```

Pin 1: GND (Ground) Pin 2: RESET (Reset output) Pin 3: VCC (Supply voltage) Pin 4: MR (Manual reset input)

Functional Features

• Monitors the supply voltage and generates a reset signal when it falls below a certain threshold.
• Provides a manual reset input for immediate system reset.
• Low quiescent current consumption ensures minimal power usage.
• Push-pull output configuration allows direct interface with other digital circuitry.

Advantages and Disadvantages

Advantages: - Accurate voltage monitoring helps prevent damage to sensitive components. - Low power consumption makes it suitable for battery-powered applications. - Small package size enables space-efficient designs.

Disadvantages: - Limited voltage range may not be suitable for all applications. - Lack of adjustable threshold voltage may restrict its use in certain scenarios.

Working Principles

The MAX6385XS24D4-T operates by continuously monitoring the supply voltage. When the voltage falls below the preset threshold, it generates a reset signal to initiate system reset. The manual reset input allows for immediate system restart if required. The push-pull output configuration ensures compatibility with various digital circuitry.

Application Field Plans

The MAX6385XS24D4-T is commonly used in a wide range of electronic devices and systems, including but not limited to:

1. Microcontrollers and microprocessors
2. Power management circuits
3. Industrial control systems
4. Automotive electronics
5. Battery-powered devices

Alternative Models

Here are some alternative models that offer similar functionality:

1. MAX6384XS24D4-T
2. MAX6386XS24D4-T
3. MAX6387XS24D4-T
4. MAX6388XS24D4-T

These models have different voltage thresholds and may vary in other specifications, so it is important to select the one that best suits the specific application requirements.

In conclusion, the MAX6385XS24D4-T is a voltage supervisor with accurate monitoring capabilities, low power consumption, and a compact package. It finds applications in various electronic systems where voltage stability is crucial.