Meixin Integrated
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MAX6897PAZT+TCCQ
자세히보기 데이터시트

MAX6897PAZT+TCCQ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Reference
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: 8-pin Thin SOT23
  • Essence: Provides a stable and accurate voltage reference for various electronic applications
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Output Voltage: 2.5V
  • Initial Accuracy: ±0.1%
  • Temperature Coefficient: ±50ppm/°C
  • Dropout Voltage: 200mV at 10mA
  • Quiescent Current: 45µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX6897PAZT+TCCQ has the following pin configuration:

  1. GND: Ground
  2. NC: No Connection
  3. VOUT: Output Voltage
  4. NC: No Connection
  5. NC: No Connection
  6. NC: No Connection
  7. NC: No Connection
  8. VIN: Input Voltage

Functional Features

  • High accuracy and stability over temperature and time
  • Low dropout voltage allows for efficient power management
  • Low quiescent current minimizes power consumption
  • Excellent line and load regulation ensures consistent performance
  • Short-circuit and thermal protection for enhanced reliability

Advantages and Disadvantages

Advantages: - High precision and stability - Low power consumption - Small package size - Wide operating temperature range

Disadvantages: - Limited output voltage options - Not suitable for high current applications

Working Principles

The MAX6897PAZT+TCCQ is a voltage reference IC that generates a stable and accurate output voltage of 2.5V. It utilizes a bandgap voltage reference circuit to provide a precise reference voltage that remains constant over temperature variations. The IC is designed to operate with low dropout voltage, allowing it to work efficiently even when the input voltage is close to the output voltage.

Detailed Application Field Plans

The MAX6897PAZT+TCCQ is commonly used in various electronic applications where a stable and accurate voltage reference is required. Some of its typical application fields include:

  1. Analog-to-Digital Converters (ADCs)
  2. Digital-to-Analog Converters (DACs)
  3. Voltage regulators
  4. Battery-powered devices
  5. Sensor circuits
  6. Precision instrumentation

Detailed and Complete Alternative Models

  1. MAX6037AAUT25+: 2.5V Voltage Reference, SOT23-6 package
  2. LT1460HCS3-2.5#PBF: 2.5V Micropower Precision Voltage Reference, SOT23-3 package
  3. REF5025AIDGKT: 2.5V Precision Voltage Reference, MSOP-8 package
  4. LM4040DIM3-2.5/NOPB: 2.5V Precision Micropower Shunt Voltage Reference, SOT23-3 package
  5. ADR4525BRZ: 2.5V High Precision Voltage Reference, SOIC-8 package

These alternative models offer similar functionality and characteristics to the MAX6897PAZT+TCCQ, providing options for different package sizes and pin configurations.

In conclusion, the MAX6897PAZT+TCCQ is a high-precision voltage reference IC that offers stability, accuracy, and low power consumption. It is widely used in various electronic applications requiring a reliable voltage reference.

기술 솔루션에 MAX6897PAZT+TCCQ 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MAX6897PAZT+TCCQ in technical solutions:

  1. Question: What is the MAX6897PAZT+TCCQ?
    Answer: The MAX6897PAZT+TCCQ is a specific model of voltage detector IC (integrated circuit) manufactured by Maxim Integrated.

  2. Question: What is the purpose of the MAX6897PAZT+TCCQ?
    Answer: The MAX6897PAZT+TCCQ is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  3. Question: What is the operating voltage range of the MAX6897PAZT+TCCQ?
    Answer: The MAX6897PAZT+TCCQ operates within a voltage range of 1.6V to 5.5V.

  4. Question: How does the MAX6897PAZT+TCCQ detect voltage levels?
    Answer: The MAX6897PAZT+TCCQ uses an internal voltage reference and a voltage comparator to compare the input voltage with a preset threshold.

  5. Question: Can the threshold voltage be adjusted in the MAX6897PAZT+TCCQ?
    Answer: No, the threshold voltage in the MAX6897PAZT+TCCQ is fixed and cannot be adjusted.

  6. Question: What is the output type of the MAX6897PAZT+TCCQ?
    Answer: The MAX6897PAZT+TCCQ has an open-drain output, which means it can sink current but not source it.

  7. Question: What is the maximum sinking current capability of the MAX6897PAZT+TCCQ?
    Answer: The MAX6897PAZT+TCCQ can sink a maximum current of 10mA.

  8. Question: Can the MAX6897PAZT+TCCQ be used in battery-powered applications?
    Answer: Yes, the low operating voltage range and low quiescent current make it suitable for battery-powered applications.

  9. Question: Does the MAX6897PAZT+TCCQ have any built-in protection features?
    Answer: Yes, the MAX6897PAZT+TCCQ has built-in overvoltage protection to prevent damage to the IC during voltage spikes.

  10. Question: What is the package type of the MAX6897PAZT+TCCQ?
    Answer: The MAX6897PAZT+TCCQ is available in a small SOT23-3 package, which is commonly used for surface-mount applications.

Please note that these answers are general and may vary depending on the specific requirements and application of the MAX6897PAZT+TCCQ in a technical solution.