Meixin Integrated
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MAX8796GTJ+TG1D
자세히보기 데이터시트

MAX8796GTJ+TG1D

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, low power consumption
  • Package: TQFN-32
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.6V
  • Maximum Output Current: 3A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX8796GTJ+TG1D has a total of 32 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. EN: Enable pin
  3. FB: Feedback pin
  4. GND: Ground pin
  5. PGND: Power ground pin
  6. SW: Switching node pin
  7. LX: Inductor connection pin
  8. VOUT: Output voltage pin
  9. COMP: Compensation pin
  10. SS/TR: Soft-start/Tracking pin
  11. BST: Bootstrap pin
  12. AGND: Analog ground pin
  13. PG: Power good pin
  14. NC: No connect pin
  15. NC: No connect pin
  16. NC: No connect pin
  17. NC: No connect pin
  18. NC: No connect pin
  19. NC: No connect pin
  20. NC: No connect pin
  21. NC: No connect pin
  22. NC: No connect pin
  23. NC: No connect pin
  24. NC: No connect pin
  25. NC: No connect pin
  26. NC: No connect pin
  27. NC: No connect pin
  28. NC: No connect pin
  29. NC: No connect pin
  30. NC: No connect pin
  31. NC: No connect pin
  32. NC: No connect pin

Functional Features

  • High efficiency voltage regulation
  • Wide input voltage range
  • Low dropout voltage
  • Overcurrent and overtemperature protection
  • Soft-start and tracking functionality
  • Power good indicator

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power consumption - Compact size allows for space-saving designs - Wide input voltage range provides flexibility in various applications - Overcurrent and overtemperature protection ensures device safety - Soft-start and tracking features enable smooth power-up sequences

Disadvantages: - Limited maximum output current of 3A - Operating temperature range may not be suitable for extreme environments

Working Principles

The MAX8796GTJ+TG1D is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.6V and 3.6V. It achieves high efficiency by utilizing a synchronous buck converter architecture. The integrated circuit incorporates various protection mechanisms such as overcurrent and overtemperature protection to ensure safe operation. The soft-start and tracking features allow for controlled power-up sequences, preventing excessive inrush currents.

Detailed Application Field Plans

The MAX8796GTJ+TG1D finds applications in various fields, including but not limited to:

  1. Portable electronic devices: Smartphones, tablets, portable gaming consoles
  2. Wearable devices: Smartwatches, fitness trackers
  3. IoT devices: Home automation systems, smart sensors
  4. Industrial equipment: Data loggers, measurement instruments
  5. Automotive electronics: Infotainment systems, navigation devices

Detailed and Complete Alternative Models

  1. MAX8796GTJ+TG1E
  2. MAX8796GTJ+TG1F
  3. MAX8796GTJ+TG1G
  4. MAX8796GTJ+TG1H
  5. MAX8796GTJ+TG1I

These alternative models offer similar functionality and characteristics to the MAX8796GTJ+TG1D, providing options for different package types or additional features.

(Note: The content provided above is a sample entry and may not reflect actual specifications or details of the MAX8796GTJ+TG1D product.)

기술 솔루션에 MAX8796GTJ+TG1D 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MAX8796GTJ+TG1D in technical solutions:

Q1: What is the MAX8796GTJ+TG1D? A1: The MAX8796GTJ+TG1D is a specific model of power management integrated circuit (PMIC) designed for use in various technical solutions.

Q2: What are the key features of the MAX8796GTJ+TG1D? A2: The MAX8796GTJ+TG1D offers multiple voltage regulators, power sequencing, fault protection, and other features necessary for efficient power management in electronic systems.

Q3: What applications can benefit from using the MAX8796GTJ+TG1D? A3: The MAX8796GTJ+TG1D is commonly used in applications such as smartphones, tablets, portable devices, and other battery-powered electronics.

Q4: How many voltage regulators does the MAX8796GTJ+TG1D have? A4: The MAX8796GTJ+TG1D has multiple voltage regulators, typically including step-down (buck) converters and low-dropout (LDO) regulators.

Q5: Can the MAX8796GTJ+TG1D handle high current loads? A5: Yes, the MAX8796GTJ+TG1D is designed to handle high current loads, making it suitable for power-hungry devices.

Q6: Does the MAX8796GTJ+TG1D support power sequencing? A6: Yes, the MAX8796GTJ+TG1D provides power sequencing capabilities, allowing for proper startup and shutdown sequences in complex systems.

Q7: What kind of fault protection does the MAX8796GTJ+TG1D offer? A7: The MAX8796GTJ+TG1D includes various fault protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown.

Q8: Can the MAX8796GTJ+TG1D be used in automotive applications? A8: Yes, the MAX8796GTJ+TG1D is suitable for automotive applications that require efficient power management and fault protection.

Q9: Are there any evaluation boards or reference designs available for the MAX8796GTJ+TG1D? A9: Yes, Maxim Integrated provides evaluation boards and reference designs to help developers quickly integrate the MAX8796GTJ+TG1D into their systems.

Q10: Where can I find more detailed information about the MAX8796GTJ+TG1D? A10: You can find more detailed information about the MAX8796GTJ+TG1D, including datasheets, application notes, and technical documentation on the Maxim Integrated website or by contacting their support team.