이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
24LC01BH-E/MS

24LC01BH-E/MS

Product Overview

Category

The 24LC01BH-E/MS belongs to the category of electrically erasable programmable read-only memory (EEPROM) integrated circuits.

Use

It is used for non-volatile data storage in various electronic devices, including consumer electronics, automotive systems, and industrial applications.

Characteristics

  • Non-volatile memory
  • I2C interface
  • Low power consumption
  • Small form factor

Package

The 24LC01BH-E/MS is available in a standard 8-pin SOIC package.

Essence

This EEPROM IC provides reliable and durable data storage with low power requirements, making it suitable for a wide range of applications.

Packaging/Quantity

The 24LC01BH-E/MS is typically packaged in reels containing a specific quantity based on customer requirements.

Specifications

  • Memory Size: 1 Kbit
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature: -40°C to 125°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

  1. A0 - Chip Address Input
  2. A1 - Chip Address Input
  3. A2 - Chip Address Input
  4. VSS - Ground
  5. SDA - Serial Data
  6. SCL - Serial Clock
  7. WP - Write Protect
  8. VCC - Power Supply

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • 128-byte Page Buffer
  • Sequential Read Operation

Advantages

  • Small form factor
  • Low power consumption
  • High data retention
  • Wide operating voltage range

Disadvantages

  • Limited storage capacity
  • Slower write speeds compared to other memory technologies

Working Principles

The 24LC01BH-E/MS operates by using an I2C interface to communicate with the host system. It stores and retrieves data through byte and page write operations, providing non-volatile memory storage for critical information.

Detailed Application Field Plans

The 24LC01BH-E/MS is commonly used in: - Smartphones and tablets for storing configuration data - Automotive systems for storing calibration parameters - Industrial control systems for storing operational settings

Detailed and Complete Alternative Models

  • 24LC02B-I/SN
  • 24LC04B-I/P
  • 24LC08B-I/P
  • 24LC16B-I/P

In conclusion, the 24LC01BH-E/MS is a versatile EEPROM IC that offers reliable non-volatile memory storage with low power consumption, making it suitable for a wide range of electronic applications.

Word Count: 410

기술 솔루션에 24LC01BH-E/MS 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum clock frequency supported by 24LC01BH-E/MS?
    - The maximum clock frequency supported by 24LC01BH-E/MS is 400 kHz.

  2. What is the operating voltage range of 24LC01BH-E/MS?
    - The operating voltage range of 24LC01BH-E/MS is 1.7V to 5.5V.

  3. Can 24LC01BH-E/MS be used for storing sensitive data?
    - Yes, 24LC01BH-E/MS features a write protect pin that can be used to prevent accidental writes and protect sensitive data.

  4. What is the typical write cycle endurance of 24LC01BH-E/MS?
    - The typical write cycle endurance of 24LC01BH-E/MS is 1,000,000 cycles.

  5. Is 24LC01BH-E/MS compatible with I2C communication protocol?
    - Yes, 24LC01BH-E/MS is compatible with the I2C communication protocol.

  6. What is the storage capacity of 24LC01BH-E/MS?
    - 24LC01BH-E/MS has a storage capacity of 128 bits.

  7. Can 24LC01BH-E/MS operate in extended temperature ranges?
    - Yes, 24LC01BH-E/MS is designed to operate in extended temperature ranges from -40°C to +125°C.

  8. Does 24LC01BH-E/MS support sequential reads?
    - Yes, 24LC01BH-E/MS supports sequential reads, allowing for efficient data retrieval.

  9. What is the package type of 24LC01BH-E/MS?
    - 24LC01BH-E/MS is available in an 8-lead SOIC package.

  10. Can multiple 24LC01BH-E/MS devices be connected on the same I2C bus?
    - Yes, multiple 24LC01BH-E/MS devices can be connected on the same I2C bus by using different device addresses.