이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
24LC01BH-E/ST

24LC01BH-E/ST

Product Overview

Category

The 24LC01BH-E/ST belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

It is used for non-volatile data storage in various electronic devices such as consumer electronics, automotive systems, and industrial applications.

Characteristics

  • Non-volatile memory
  • I2C interface
  • Low power consumption
  • Small form factor

Package

The 24LC01BH-E/ST is available in a standard 8-pin SOIC package.

Essence

The essence of this product lies in its ability to store data reliably in a compact and energy-efficient manner.

Packaging/Quantity

It is typically supplied in reels with a quantity of 2500 units per reel.

Specifications

  • Memory Size: 1 Kbit
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to 125°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 24LC01BH-E/ST features the following pin configuration: 1. A0 - Chip Address Input 2. A1 - Chip Address Input 3. A2 - Chip Address Input 4. VSS - Ground 5. SDA - Serial Data 6. SCL - Serial Clock 7. WP - Write Protect 8. VCC - Power Supply

Functional Features

  • Byte and Page Write Modes
  • Self-timed Write Cycle
  • 128-byte Page Write Buffer
  • Sequential Read Operation
  • Write Protect Pin for Hardware Data Protection

Advantages and Disadvantages

Advantages

  • Compact size
  • Low power consumption
  • High data retention
  • I2C interface for easy integration

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Slower write speeds compared to volatile memory

Working Principles

The 24LC01BH-E/ST operates by utilizing an I2C interface to communicate with the host system. It stores data in non-volatile memory cells, allowing for reliable data retention even when power is removed.

Detailed Application Field Plans

This EEPROM chip is commonly used in applications such as: - Smartphones and tablets for storing device configuration data - Automotive systems for storing critical vehicle parameters - Industrial control systems for storing calibration data and event logs

Detailed and Complete Alternative Models

Some alternative models to the 24LC01BH-E/ST include: - 24LC02B-I/SN - 24LC04B-I/P - 24LC08B-I/P - 24LC16B-I/P

In conclusion, the 24LC01BH-E/ST is a versatile EEPROM chip that offers reliable non-volatile data storage in a compact and energy-efficient package. Its I2C interface and functional features make it suitable for a wide range of electronic applications.

Word Count: 411

기술 솔루션에 24LC01BH-E/ST 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum clock frequency for 24LC01BH-E/ST?
    - The maximum clock frequency for 24LC01BH-E/ST is 400 kHz.

  2. What is the operating voltage range for 24LC01BH-E/ST?
    - The operating voltage range for 24LC01BH-E/ST is 1.7V to 5.5V.

  3. Can 24LC01BH-E/ST be used in automotive applications?
    - Yes, 24LC01BH-E/ST is suitable for automotive applications.

  4. What is the typical write cycle time for 24LC01BH-E/ST?
    - The typical write cycle time for 24LC01BH-E/ST is 5 ms.

  5. Is 24LC01BH-E/ST compatible with I2C protocol?
    - Yes, 24LC01BH-E/ST is compatible with I2C protocol.

  6. What is the storage temperature range for 24LC01BH-E/ST?
    - The storage temperature range for 24LC01BH-E/ST is -65°C to 150°C.

  7. Can 24LC01BH-E/ST be used in industrial control systems?
    - Yes, 24LC01BH-E/ST is suitable for use in industrial control systems.

  8. What is the maximum data transfer rate for 24LC01BH-E/ST?
    - The maximum data transfer rate for 24LC01BH-E/ST is 100 kHz at 1.7V and 400 kHz at 5.5V.

  9. Does 24LC01BH-E/ST have built-in write protection?
    - Yes, 24LC01BH-E/ST features built-in hardware write protection.

  10. What is the package type for 24LC01BH-E/ST?
    - 24LC01BH-E/ST is available in a 5-lead SOT-23 package.